Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet can incorporate either a plastic flow straightener or a plastic aerator. When supplied with a plastic flow straightener there is a combined EPDM washer and stainless steel strainer behind it. The products are available either as a version with a pop-up waste or one with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110804

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

IFLO ON BODY

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2026

Model:

101543 Iflo reno basin mixer no waste 683771 Iflo garda basin mixer no waste 683835 Iflo santerno basin mixer no waste 683838 Iflo santerno tall basin mixer no waste 295313 Iflo barcelona basin mixer no waste

Approval Holder:

CITY PLUMBING SUPPLIES HOLDINGS LTD

Company Name

CITY PLUMBING SUPPLIES HOLDINGS LTD

Address

HIGHBOURNE GROUP LTD HIGHBOURNE HOUSE ELDON WAY NORTHHAMPTONSHIRE

Postcode

NN6 7SL

View All Listings by this Company

Wall mounted, thermostatic shower valve (chromium plated brass). Flow is controlled by a quarter turn ceramic disc headwork with single lever operating member. Temperature is controlled independently by a thermostatic cartridge with a cross-top operating member that incorporates a manual override button. The product is supplied with a shower rail and overhead shower. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve with thermostatic temperature control

WRAS Approval Number:

2111383

Size:

15mm compression

Marking:

Iflo on front tap body

Installation Requirements:

R001 R010 R040

Expiry date:

30/11/2026

Model:

483839 iflo Wetherley Thermostatic Mixer Valve

Approval Holder:

CITY PLUMBING SUPPLIES HOLDINGS LTD

Company Name

CITY PLUMBING SUPPLIES HOLDINGS LTD

Address

HIGHBOURNE GROUP LTD HIGHBOURNE HOUSE ELDON WAY NORTHHAMPTONSHIRE

Postcode

NN6 7SL

View All Listings by this Company

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork, single lever operating members and self- cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener & the products are supplied with metal backnuts. The product includes a shower hose and handset. Maximum working pressure 10.0 bar. Maximum working temperature 70°C.

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

2012378

Size:

¾” BSP (M).

Marking:

IFLO on front of tap body.

Installation Requirements:

R001 R030

Expiry date:

31/12/2025

Model:

604587 iflo classic Barcelona bath shower mixer combination tap assembly

Approval Holder:

CITY PLUMBING SUPPLIES HOLDINGS LTD

Company Name

CITY PLUMBING SUPPLIES HOLDINGS LTD

Address

HIGHBOURNE GROUP LTD HIGHBOURNE HOUSE ELDON WAY NORTHHAMPTONSHIRE

Postcode

NN6 7SL

View All Listings by this Company

Single hole single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic flow aerator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2007809

Size:

Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.

Marking:

IFLO ON TAP BODY

Installation Requirements:

R001 R090

Expiry date:

31/07/2025

Model:

907015

Approval Holder:

CITY PLUMBING SUPPLIES HOLDINGS LTD

Company Name

CITY PLUMBING SUPPLIES HOLDINGS LTD

Address

HIGHBOURNE GROUP LTD HIGHBOURNE HOUSE ELDON WAY NORTHHAMPTONSHIRE

Postcode

NN6 7SL

View All Listings by this Company

Range of two hole, single outlet (swivel) combination tap assembly with brass bodies (chrome plated), incorporating quarter turn ceramic disc headworks and single lever operating members (model 278585) or non-rising spindle headworks with dome type operating member (model 278583). The spout outlet incorporates a plastic aerator or plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2206372

Size:

1/2” BSP (M)

Marking:

CPS on tap body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/06/2027

Model:

278583 Base Deck Sink Mixer & 278585 Lever Deck Sink Mixer combination tap assemblies

Approval Holder:

CITY PLUMBING SUPPLIES HOLDINGS LTD

Company Name

CITY PLUMBING SUPPLIES HOLDINGS LTD

Address

HIGHBOURNE GROUP LTD HIGHBOURNE HOUSE ELDON WAY NORTHHAMPTONSHIRE

Postcode

NN6 7SL

View All Listings by this Company