Range of wall mounted hose union taps (brass, chrome plated brass or DZR brass body) incorporating a non-rising spindle headwork with a butterfly handle operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1780 Taps

Section Subtitle:

Hose union tap. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building. Where in existing house installations a hosepipe is to be used from an existing hose union tap located outside a house and which is not provided with backflow protection, either: a. The existing hose union tap should be provided with a double check valve (Type EC or ED) located inside the building; or b. The tap should be replaced with a hose union tap that incorporates a double check valve (type HUK1); or c. A hose union backflow prevention (Type HA) or a double check valve should be continuously fitted to the outlet of the tap; or d. Is legally installed in any premises.

WRAS Approval Number:

2104064

Size:

¾” BSP male inlet x 19mmØ hose outlet

Marking:

CPS and size on body.

Installation Requirements:

R001 R040

Expiry date:

30/04/2026

Model:

961136

Product Images

Approval Holder:

CITY PLUMBING SUPPLIES HOLDINGS

Company Name

CITY PLUMBING SUPPLIES HOLDINGS

Postcode

NN6 7SL

View All Listings by this Company

Single hole, single outlet, fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 70°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2004071

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.

Marking:

IFLO on tap body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2025

Model:

484028 IFLO TALL BASIN MIXER COMBINATION TAP ASSEMBLIES

Product Images

Approval Holder:

CITY PLUMBING SUPPLIES HOLDINGS

Company Name

CITY PLUMBING SUPPLIES HOLDINGS

Postcode

NN6 7SL

View All Listings by this Company

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Model 805777 incorporate a non-rising spindle headwork with dome type operating members. Model 805783 incorporate a quarter turn ceramic disc headwork with single lever operating members. The fitting incorporates a manual diverter to the shower outlet The spout outlet incorporates a plastic flow straightener and the products are supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.

WRAS Approval Number:

2012371

Size:

¾” BSP (M)

Marking:

CPS ON TAP BODY

Installation Requirements:

R001 R020

Expiry date:

31/12/2025

Model:

805777 bath shower mixer & 805783 lever bath shower mixer combination tap assemblies

Approval Holder:

CITY PLUMBING SUPPLIES HOLDINGS

Company Name

CITY PLUMBING SUPPLIES HOLDINGS

Postcode

NN6 7SL

View All Listings by this Company

Range of pillar taps with brass bodies (chrome plated), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener or aerator. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating pressure 85°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap.

WRAS Approval Number:

2105809

Size:

See model

Marking:

CPS ON TAP BODY

Installation Requirements:

R001 R005

Expiry date:

31/05/2026

Model:

½” BSP (M) 805778 ¾” BSP (M) 805781

Approval Holder:

CITY PLUMBING SUPPLIES HOLDINGS

Company Name

CITY PLUMBING SUPPLIES HOLDINGS

Postcode

NN6 7SL

View All Listings by this Company

Range of pillar taps with brass bodies (various finishes), incorporating quarter turn ceramic disc headwork with single lever operating members. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating pressure 85°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap.

WRAS Approval Number:

2105810

Size:

See model

Marking:

iflo on tap body

Installation Requirements:

R001 R006

Expiry date:

31/05/2026

Model:

½” BSP (M) 724782 iflo torno basin ¾” BSP (M) 724783 iflo torno bath pillar taps

Approval Holder:

CITY PLUMBING SUPPLIES HOLDINGS

Company Name

CITY PLUMBING SUPPLIES HOLDINGS

Postcode

NN6 7SL

View All Listings by this Company