TEST SITE

Zip Heaters UK Ltd T/A Zip Water UK Approvals


#2204029

Range of wall mounted, electrically heated catering water boilers. The boilers incorporate stainless steel storage tanks with stainless steel vent and overflow and silicon washers and gaskets, fed via a solenoid valve. The water is discharged via a self-closing tap with single lever operating member. The solenoid valve incorporates a plastic strainer at the inlet. Maximum working pressure 7.0 bar. Maximum operating temperature 98°C.

Section:
0060 Boilers
Section Subtitle:
Catering, Feed Cistern or Pressure.
WRAS Approval Number:
2204029
Size:
15mm pushfit inlet
Marking:
Instanta on front of unit. Instanta, max/min pressure and technical information on adhesive label on bottom of unit.
Installation Requirements:
R001 R040 R150
Expiry date:
30/04/2027
Model:
WMS2 (WA2N) – SureFlow Wall Mounted 2.5 Litre WMS5 (WA5N) - SureFlow Wall Mounted 5 Litre WMS10 (WA10N) - SureFlow Wall Mounted 10 Litre HS001UK – 1.5 Ltr Instant On-Wall Boiling Water Heater in White WMSP3W (WM3) – SureFlow Plus Wall Mounted 3 Litre White WMSP3 (WM3SS) - SureFlow Plus Wall Mounted 3 Litre WMSP7W (WM7) - SureFlow Plus Wall Mounted 7.5 Litre White WMSP7 (WM7SS) - SureFlow Plus Wall Mounted 7.5 Litre WMSP15 (WM15-3SS) - SureFlow Plus Wall Wall Mounted 15 Litre WMSP15/6 (WM15-6SS) – SureFlow Plus Wall Mounted 15 Litre 6kW WMSP25 (WM25SS) – SureFlow Plus Wall Mounted 25 Litre
Product Images

Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Instanta Ltd
Company Name
Instanta Ltd
Address
Canning Road Southport Merseyside
Postcode
PR9 7SN
Phone
01704 501114

View All Listings by this Company

Print This Approval


#2207038

Range of electric instantaneous water heaters. The DEX and DCX models incorporate a spherical ball valve on the inlet. The CEX and DEX models incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlet incorporates a strainer. Maximum working pressure 10 bar (DEX models only) All other models open outlet. Maximum operating temperature: ES3/4/5 and Zip Hydrotap G4/G5 ranges – 65ºC. CEX, DEX and DCX ranges - 70°C.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2207038
Size:
ES, Zip HydroTap and CEX models - ½” BSP male inlet and outlet. DEX and DCX models- 3/8” BSP captive nut inlet and outlet that connects to a valve with a ½” BSP male inlet.
Marking:
Zip inline and Clage on front cover. Zip inline, model, Maximum temperature and pressure and technical information on label on body.
Installation Requirements:
R001 R040
Expiry date:
31/07/2027
Model:
ES3 ES4 ES6 CEX CEX-U DEX12 NEXT DCX NEXT ZIP HydroTap G4 & G5 booster
Product Images

Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Clage GmbH
Company Name
Clage GmbH
Address
PIROLWEG 1 5 21337 LUENEBURG GERMANY

View All Listings by this Company

Print This Approval


#2209008

‘Aquapoint APIII’ range of direct unvented under basin or over basin (wall mounted) electrically heated, enamel lined insulated steel storage cylinders. The cylinders are supplied with an expansion relief valve set at 6.0 bar. Maximum working pressure 5.5 bar. Maximum operating temperature 75°C.

Section:
1380 Heaters
Section Subtitle:
Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2209008
Size:
½” BSP (M) inlet and outlet.
Marking:
Zip Aquapoint on body. Zip Water, Aquapoint, capacity and other technical information on adhesive label on body.
Installation Requirements:
R001 R040
Expiry date:
30/09/2027
Model:
Under basin (models): AP3/05, AP3/10 & AP3/15. Over basin (wall mounted) models: AP3/05/OB, AP3/10/OB & AP3/15/OB. Where 05, 10 & 15 indicate capacity in litres.
Product Images

Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Tiki Doo Stara Pazova
Company Name
Tiki Doo Stara Pazova
Address
Golubinacki Put 1B Stara Pazova 22300 Serbia

View All Listings by this Company

Print This Approval


#2209030

Varipoint range of unvented water heaters with copper bodies, fitted with a temperature & pressure relief valve (7.0 bar) and supplied with a pressure relief valve (6.0 bar). Maximum working pressure 5.5 bar. Maximum operating temperature 85°C.

Section:
1380 Heaters
Section Subtitle:
Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2209030
Size:
½” BSP male inlet and outlet.
Marking:
ZIP Varipoint and product info on adhesive label.
Installation Requirements:
R001
Expiry date:
30/09/2027
Model:
VP103 – Varipoint II Overbasin 10ltr VP103UB – Varipoint II Underbasin 10ltr VP153 – Varipoint II Overbasin 15ltr VP153UB – Varipoint II Underbasin 15ltr
Product Images

Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company

Print This Approval


#2304066

Range of boiling water dispensers incorporating plastic (3-7.5 litre models) or stainless steel (10-40 litre models) cisterns with silicone ‘O’-rings and seals. The flow to the internal reservoir is controlled via a float valve. The internal reservoir incorporates an overflow which acts a vent. The inlet incorporates a plastic filter. Water is dispensed using either a lever or push button (PLUS models only) operated self-closing tap. Maximum working pressure 5.0 bar. Maximum operating temperature 98°C. Cold supply only.

Section:
0060 Boilers
Section Subtitle:
Catering, Feed Cistern or Pressure.
WRAS Approval Number:
2304066
Size:
15mm compression.
Marking:
Zip on casing and operating member. PN, ZIP Hydroboil (Hydroboil models only) and product information on adhesive label on underside of body.
Installation Requirements:
R001 R040 R150
Expiry date:
30/04/2028
Model:
403542 Zip Econoboil 3L, 405542 Zip Econoboil 5L, 403552 Zip Hydroboil 3L, 405552 Zip Hydroboil 5L, 407552 Zip Hydroboil 7.5L, 410552 Zip Hydroboil 10L, 415552 Zip Hydroboil 15L, 425552 Zip Hydroboil 25L, 440552 Zip Hydroboil 40L, 403562 Zip Hydroboil Plus 3L, 405562 Zip Hydroboil Plus 5L, 407562 Zip Hydroboil Plus 7.5L.

Approval Holder:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 3

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.