Concealed installation set for use with wall mounted overhead shower outlets (brass body – various finishes). The inlet to the shower outlet incorporates a stainless-steel strainer, a plastic flow regulator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2107045

Size:

Concealed installation set: ½” BSP (F). Shower outlets: ½” BSP (M).

Marking:

AXOR on body.

Installation Requirements:

R001 R040

Expiry date:

31/07/2026

Model:

Concealed installation set: 28 486 180 AXOR ShowerSolutions Basic set. Shower outlets: 28 491 xxx AXOR ShowerSolutions, 36 822 xxx AXOR Citterio E. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The 36 110 000 model is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2107046

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜" captive nut end connections

Marking:

AXOR on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/07/2026

Model:

36 110 xxx AXOR Citterio E, 36 111 xxx AXOR Citterio E, 36 112 xxx AXOR Citterio E, 36 113 xxx AXOR Citterio E. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Bath spout outlet with a brass body (various finishes) and a plastic aerator. Maximum operating temperature 60°C.

Section:

0682

WRAS Approval Number:

2107050

Size:

¾” BSP (M)

Marking:

AXOR on spout

Installation Requirements:

R001 R040

Expiry date:

31/07/2026

Model:

36 425 xxx AXOR Citterio E Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of wall mounted, concealed, thermostatic shower blending valves with brass bodies and trim sets (various finishes). The temperature is controlled via a thermostatic cartridge with a cross top or single lever operating member. The inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve with thermostatic temperature control

WRAS Approval Number:

2107096

Size:

Body for insertion into Hansgrohe iBox 01800180 & 01810180 & 01700180

Marking:

Hansgrohe or Axor on faceplate.

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2026

Model:

15 741 xxx Hansgrohe ShowerSelect S Highflow 31 571 xxx Hansgrohe Metris Highflow 15 734 400 Hansgrohe ShowerSelect Glass 15 734 600 Hansgrohe ShowerSelect Glass 15 772 xxx Hansgrohe PuraVida Highflow 15 760 xxx Hansgrohe ShowerSelect 38 715 xxx Axor Uno Highflow 36 711 xxx Axor ShowerSelect Soft 10 715 xxx Axor Starck Highflow 10 717 xxx Axor Starck X Highflow 12 711 xxx Axor Starck Organic Highflow 11 731 xxx Axor Urquiola Highflow 17 712 xxx Axor Carlton Highflow 36 718 xxx Axor ShowerSelect Square Highflow 36 721 xxx Axor ShowerSelect Round 16 815 xxx Axor Montreux Highflow 34 716 xxx Axor Citterio M Highflow 39 711 xxx Axor Citterio Highflow 39 716 xxx Axor Citterio Highflow 18 741 xxx Axor Massaud Highflow 19 702 xxx Axor Bouroullec Highflow 15 706 xxx Hansgrohe Ecostat E 15 756 xxx Hansgrohe Ecostat S 16 824 xxx Axor Montreux Thermostatic Models added January 2022: 46 740 xxx Axor Edge Highflow 46 741 xxx Axor Edge Highflow Diamond Cut All of the above are to be installed in conjunction with the I-box rough in sets: 01800180, 01810180 & 01700180. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Shower handset with brass body (various finishes). The inlet incorporates a stainless-steel strainer. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2111702

Size:

1/2" BSP (M)

Marking:

Axor on body.

Installation Requirements:

R001 R040

Expiry date:

30/11/2026

Model:

16 320 xxx AXOR Montreux Hand shower 100 1jet Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company