Wall mounted two-hole, single outlet (fixed) combination tap assembly, (brass body - various finishes) incorporating a ceramic cartridge with single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

2311014

Size:

3/4" BSP (M) X 1/2" BSP (M) offset union

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R030

Expiry date:

30/11/2028

Model:

32 420 xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of ceramic cartridge headworks with plastic bodies & silicone rubber seals. For insertion into specifically dimensioned bores. Maximum working pressure 16.0 Bar.

Non-metallic materials and components comply with BS6920 at 80°C

Section:

0440 Headworks

Section Subtitle:

Headwork for installation into specifically dimensioned taps or shower valve bodies. Fittings listed in this section have undergone endurance and BS6920 testing in accordance with the requirements of the Regulators` Specification.

WRAS Approval Number:

2401706

Size:

35mm diameter

Marking:

Hansgrohe & M35 on body.

Installation Requirements:

R001

Expiry date:

31/01/2029

Model:

30 129 900 – M35R, 30 129 902 – M 35R, 30 129 910 – M35R EcoR 30 129 920 – M35L. 30 129 921 – M35LA 30 129 922 – M35L 30 179 610 – M35 EcoR WT

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates an aerator. Maximum working pressure 10 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2401707

Size:

Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/01/2029

Model:

31 130 xxx Where xxx denotes the surface. It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Single-hole, single outlet, fixed, combination tap assembly with (brass body - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a lever type pop-up waste. Maximum working pressure 10 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2311018

Size:

Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ½” captive nut end connections.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2028

Model:

14 057 xxx – Hansgrohe Ecos Where xxx denotes the surface finish It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of concealed thermostatic shower valves, (brass bodies – various finished trim sets), incorporating, ceramic cartridge controlling the flow with a single lever operating member and detent headworks diverting the flow from shower to shower. The temperature is controlled independently via a thermostatic cartridge with dome type operating member with manual override buton. The inlets incorporate single check valve cartridges, (however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection). Maximum operating pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve with thermostatic temperature control

WRAS Approval Number:

2311030

Size:

Product to be installed in combination with iBox universal Basic Set 01500180 which has 1/2" BSP female inlets and outlets.

Marking:

Hansgrohe on operating member.

Installation Requirements:

R001 R010 R040

Expiry date:

30/11/2028

Model:

15 556 xx0 – Hansgrohe ShowerSelect Comfort S 15 578 xx0 - Hansgrohe ShowerSelect Comfort E 15 586 xx0 - Hansgrohe ShowerSelect Comfort Q Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company