Range of wall mounted, concealed, thermostatic blending valves with (brass bodies - various finishes, see models). The temperature is controlled via a thermostatic cartridge with single lever, cross top or cube type operating members incorporating a manual override button. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve with thermostatic temperature control

WRAS Approval Number:

2305061

Size:

Specifically dimensioned for use with rough box 01 800 180 which has ¾” BSP (F) inlet & outlets.

Marking:

Hansgrohe or Axor on faceplate (see models)

Installation Requirements:

R001 R010 R040

Expiry date:

31/05/2028

Model:

10 715 xxx (Axor marking, Cross Top), 11 731 xxx (Axor marking, Cube Type), 12 711 xxx (Axor marking, Single Lever), 15 734 400 (Hansgrohe marking, Single Lever), 15 741 xxx (Hansgrohe marking, Single Lever), 15 760 xxx (Hansgrohe marking, Single Lever), 16 815 xxx (Axor marking, Cross Top), 16 824 xxx (Axor marking, Single Lever), 34 716 xxx (Axor marking, Single Lever), 36 711 xxx (Axor marking, Single Lever), 36 718 xxx (Axor marking, Single Lever), 36 721 xxx (Axor marking, Single Lever), 38 715 xxx (Axor marking, Single Lever), 39 711 xxx (Axor marking, Single Lever), 39 716 xxx (Axor marking, Cross Top), 15 706 xxx (Hansgrohe marking, Cube Type), 15 756 xxx (Hansgrohe marking, Single Lever). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = Chrome optic finish, 800 = PPVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of wall mounted overhead showers incorporating stainless steel strainers and flow regulator in the inlet. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2305062

Size:

½” BSP (F)

Marking:

Hansgrohe on shower head

Installation Requirements:

R001 R040

Expiry date:

31/05/2028

Model:

24 350 xxx 24 351 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies, (brass bodies - various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a lever operated pop-up waste. Maximum working pressure 10.0 Bar Maximum operating temperature 70.0°C

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304071

Size:

Stainless steel braided PEX lined flexible hose assemblies with 3/8" BSP captive nut end connections.

Marking:

Axor on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2028

Model:

16 517 xxx Single lever basin mixer 16 518 xxx Single lever basin mixer

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of wall mounted, thermostatic shower valves, (brass bodies - various finishes), incorporating a ceramic disc diverter cartridges controlling the flow with dome type operating members. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with an overhead shower, shower hose, handset and riser rail assemblies. Maximum working pressure 10 Bar. Maximum operating temperature 60 °C

Non-metallic materials and components comply with BS6920 at 60°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve with thermostatic temperature control

WRAS Approval Number:

2304083

Size:

½” BSP (M)

Marking:

Hansgrohe on face of body, on the handshower and on the overhead shower.

Installation Requirements:

R001 R010 R040

Expiry date:

30/04/2028

Model:

27 361 xxx Hansgrohe Raindance E 300 1jet Showerpipe 300 27 362 xxx Hansgrohe Raindance E 300 1j 9 l/min Showerpipe 350 27 363 xxx Hansgrohe Raindance E 300 1jet Showerpipe 600 27 364 xxx Hansgrohe Raindance E 300 1j 9 l/min Showerpipe 600 Addition to range added October 2023: 26 853 xx0 Hansgrohe Rainfinity showerpipe 360 1jet with ShowerTablet 350, 28 742 xx0 Hansgrohe Rainfinity showerpipe 250 1jet EcoSmart with ShowerTablet 350.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of bath mixer valves with brass bodies, incorporating a ceramic cartridge headwork, single lever operating members and self cancelling diverter to bath and shower outlet. Maximum operating pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

2050 Diverter

Section Subtitle:

Diverter cartridge with manual adjustment.

WRAS Approval Number:

2306302

Size:

¾” BSP (F)

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R040

Expiry date:

30/06/2028

Model:

Rebris S range: 72 448 xxx 72 449 xxx 72 466 xxx 72 467 xxx Rebris E range: 72 458 xxx 72 459 xxx 72 468 xxx 72 469 xxx Models added September 2023: 71 467 xxx, 71 469 xxx.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company