Single hole, single outlet (swivel) combination tap assembly, (brass body - various finishes). Incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a lever operated pop-up waste. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304051

Size:

Stainless steel braided (PEX) lined flexible hose assemblies with 3/8" BSP captive nut end connections.

Marking:

Hansgrohe on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2028

Model:

31 087 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of overhead shower outlets, (plastic bodies - various finishes), incorporating a stainless-steel strainer.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2304055

Size:

½” BSP (F)

Marking:

Hansgrohe on shower face

Installation Requirements:

R001 R040

Expiry date:

30/04/2028

Model:

27 441 xxx Hansgrohe Croma 100 Vario Overhead Shower 27 443 xxx Hansgrohe Croma 100 Multi Overhead Shower 28 462 xxx Hansgrohe Croma 100 Vario EcoSmart Overhead Shower Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of ceiling mounted overhead shower outlets, (plastic bodies - various finishes), incorporating a stainless-steel strainer and flow regulator.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2304056

Size:

½” BSP (M)

Marking:

HANSGROHE on shower face

Installation Requirements:

R001 R040

Expiry date:

30/04/2028

Model:

26 604 xxx Hansgrohe Raindance E 360 Air 1jet overhead shower with ceiling connector 100 mm EcoSmart 9 l/min 26 605 xxx Hansgrohe Raindance E 360 Air 1jet overhead shower with shower arm 390 mm EcoSmart 9 l/min 27 380 xxx Hansgrohe Raindance E 240 Air 1jet overhead shower with ceiling connector 100 mm 27 383 xxx Hansgrohe Raindance E 240 Air 1jet overhead shower EcoSmart 9 l/min with ceiling connector 100 mm Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of two-hole, single outlet, (fixed) combination tap assemblies, (brass bodies - various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout incorporates and a self-cancelling diverter to the shower outlet and plastic aerators. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow prevention. This product is supplied with a shower hose and handset. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

2304057

Size:

¾” BSP (M)

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R005 R030

Expiry date:

30/04/2028

Model:

31 422 xxx Hansgrohe Metris 2-hole rim mounted bath mixer with diverter valve and Croma 100 Vario hand shower 31 426 xxx Hansgrohe Talis 2-hole rim mounted bath mixer with diverter valve and Croma 100 1jet hand shower 31 521 xxx Hansgrohe Focus 2-hole rim mounted bath mixer with diverter valve and Crometta 85 1jet hand shower Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of wall mounted, two-hole, thermostatic blending valves, (chrome plated brass bodies) incorporating two detent headworks controlling the flow. The temperature is controlled independently via a thermostatic cartridge with switch type operating member that incorporates a manual override button. The product is supplied with an overhead shower, shower hose, handset and riser rail assembly. The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve with thermostatic temperature control

WRAS Approval Number:

2304067

Size:

½” BSP Male

Marking:

Hansgrohe on body, hand shower and overhead shower

Installation Requirements:

R001 R010 R040

Expiry date:

30/04/2028

Model:

27 126 000 Hansgrohe Raindance Select E Showerpipe 300 2jet with ShowerTablet Select 300 27 126 400 Hansgrohe Raindance Select E Showerpipe 300 2jet with ShowerTablet Select 300 27 127 000 Hansgrohe Raindance Select E Showerpipe 300 3jet with ShowerTablet Select 300 27 127 400 Hansgrohe Raindance Select E Showerpipe 300 3jet with ShowerTablet Select 300 27 283 000 Hansgrohe Raindance Select E Showerpipe 300 2jet EcoSmart 9 l/min with ShowerTablet Select 300 27 283 400 Hansgrohe Raindance Select E Showerpipe 300 2jet EcoSmart 9 l/min with ShowerTablet Select 300 27 288 000 Hansgrohe Raindance E Showerpipe 360 1jet with ShowerTablet Select 300 27 288 400 Hansgrohe Raindance E Showerpipe 360 1jet with ShowerTablet Select 300

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company