Single hole, single outlet (swivel) combination tap assembly, (brass body - various finishes). Incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a lever operated pop-up waste. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304051

Size:

Stainless steel braided (PEX) lined flexible hose assemblies with 3/8" BSP captive nut end connections.

Marking:

Hansgrohe on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2028

Model:

31 087 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of overhead shower outlets, (plastic bodies - various finishes), incorporating a stainless-steel strainer.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2304055

Size:

½” BSP (F)

Marking:

Hansgrohe on shower face

Installation Requirements:

R001 R040

Expiry date:

30/04/2028

Model:

27 441 xxx Hansgrohe Croma 100 Vario Overhead Shower 27 443 xxx Hansgrohe Croma 100 Multi Overhead Shower 28 462 xxx Hansgrohe Croma 100 Vario EcoSmart Overhead Shower Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of ceiling mounted overhead shower outlets, (plastic bodies - various finishes), incorporating a stainless-steel strainer and flow regulator.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2304056

Size:

½” BSP (M)

Marking:

HANSGROHE on shower face

Installation Requirements:

R001 R040

Expiry date:

30/04/2028

Model:

26 604 xxx Hansgrohe Raindance E 360 Air 1jet overhead shower with ceiling connector 100 mm EcoSmart 9 l/min 26 605 xxx Hansgrohe Raindance E 360 Air 1jet overhead shower with shower arm 390 mm EcoSmart 9 l/min 27 380 xxx Hansgrohe Raindance E 240 Air 1jet overhead shower with ceiling connector 100 mm 27 383 xxx Hansgrohe Raindance E 240 Air 1jet overhead shower EcoSmart 9 l/min with ceiling connector 100 mm Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of two-hole, single outlet, (fixed) combination tap assemblies, (brass bodies - various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout incorporates and a self-cancelling diverter to the shower outlet and plastic aerators. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow prevention. This product is supplied with a shower hose and handset. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

2304057

Size:

¾” BSP (M)

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R005 R030

Expiry date:

30/04/2028

Model:

31 422 xxx Hansgrohe Metris 2-hole rim mounted bath mixer with diverter valve and Croma 100 Vario hand shower 31 426 xxx Hansgrohe Talis 2-hole rim mounted bath mixer with diverter valve and Croma 100 1jet hand shower 31 521 xxx Hansgrohe Focus 2-hole rim mounted bath mixer with diverter valve and Crometta 85 1jet hand shower Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of wall mounted, two-hole, thermostatic blending valves, (chrome plated brass bodies) incorporating two detent headworks controlling the flow. The temperature is controlled independently via a thermostatic cartridge with switch type operating member that incorporates a manual override button. The product is supplied with an overhead shower, shower hose, handset and riser rail assembly. The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve with thermostatic temperature control

WRAS Approval Number:

2304067

Size:

½” BSP Male

Marking:

Hansgrohe on body, hand shower and overhead shower

Installation Requirements:

R001 R010 R040

Expiry date:

30/04/2028

Model:

27 126 000 Hansgrohe Raindance Select E Showerpipe 300 2jet with ShowerTablet Select 300 27 126 400 Hansgrohe Raindance Select E Showerpipe 300 2jet with ShowerTablet Select 300 27 127 000 Hansgrohe Raindance Select E Showerpipe 300 3jet with ShowerTablet Select 300 27 127 400 Hansgrohe Raindance Select E Showerpipe 300 3jet with ShowerTablet Select 300 27 283 000 Hansgrohe Raindance Select E Showerpipe 300 2jet EcoSmart 9 l/min with ShowerTablet Select 300 27 283 400 Hansgrohe Raindance Select E Showerpipe 300 2jet EcoSmart 9 l/min with ShowerTablet Select 300 27 288 000 Hansgrohe Raindance E Showerpipe 360 1jet with ShowerTablet Select 300 27 288 400 Hansgrohe Raindance E Showerpipe 360 1jet with ShowerTablet Select 300

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated – brass bodies). Flow is controlled via a solenoid which is actuated via an infrared sensor and the temperature is controlled by a manual lever. The spout outlets incorporate plastic aerators. The inlet hoses incorporate stainless steel strainers and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap with a non-touch methods of flow control and a single inlet. Products listed in this section utilise flow control methods that do not require touch to activate.

WRAS Approval Number:

2304069

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.

Marking:

Axor on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2028

Model:

10 145 000 Axor Stark electronic basin mixer with temp pre adjustment with 230 V mains connection. 10 101 000 Axor Stark electronic basin mixer with temp control battery operated. 10 106 000 Axor Stark Electronic basin mixer with temp pre-adjustment battery-operated. 10 140 000 Axor Stark Electronic basin mixer with temp control with 230 V Mains connection. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of overhead shower and shower arm assemblies, (brass bodies - various finishes), incorporating a flow restrictor and stainless steel strainer on the inlet.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2304077

Size:

½” BSP (M)

Marking:

Hansgrohe on body

Installation Requirements:

R001 R040

Expiry date:

30/04/2028

Model:

Shower Head – 24 330 xx0, 24 331 xx0, 24 333 xx0 Shower Arm – 24 337 xx0, 24 338 xx0, 24 339 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with (brass bodies -various finishes), incorporating ceramic cartridge headworks and single lever operating members. The Spout outlet incorporates a plastic aerator. Some models are supplied with a pop-up waste (see list). Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304315

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2028

Model:

Rebris S range: 72 510 xxx with pop-up waste set 72 513 xxx with pop-up waste set 72 514 xxx without waste set 72 517 xxx with pop-up waste set 72 519 xxx with pop-up waste set 72 520 xxx without waste set 72 527 xxx with metal pop-up waste set 72 580 xxx with pop-up waste set 72 582 xxx without waste set 72 584 xxx with metal pop-up waste set 72 586 xxx with pop-up waste set 72 588 xxx with pop up waste set 72 590 xxx with pop-up waste set Rebris E range: 72 550 xxx with pop-up waste set 72 551 xxx with metal pop-up waste set 72 553 xxx with pop-up waste set 72 554 xxx without waste set 72 557 xxx with pop-up waste set 72 559 xxx with pop-up waste set 72 560 xxx without waste set 72 581 xxx with pop-up waste set 72 583 xxx without waste set 72 585 xxx with metal pop-up waste set 72 587 xxx with pop-up waste set 72 589 xxx with pop up waste set 72 591 xxx with pop-up waste set Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Wall mounted, two-hole, single outlet (fixed) combination tap assemblies (chrome plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar. temperature 65.0°C

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout.

WRAS Approval Number:

2303030

Size:

1/2" BSP (F)

Marking:

AXOR on body

Installation Requirements:

R001 R010 R040

Expiry date:

31/03/2028

Model:

39171XXX – AXOR Citterio 39181XXX – AXOR Citterio 39119XXX – AXOR Citterio 39121XXX – AXOR Citterio

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass bodies), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. The products are supplied with a click type pop-up waste. Maximum working pressure 10.0 Bar Maximum operating temperature 60°C

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304007

Size:

Stainless steel braided, PEX lined hose incorporating 3/8" BSP captive nut end connections.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2028

Model:

32 502 xx0 32 503 xx0 32 507 xx0 32 508 xx0 74 502 xx0 74 507 xx0

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company