A range of shower kits consisting of a shower handset, shower hose and riser rail. Open outlet use only

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2301046

Size:

PVC Outer, TPE lined flexible hose assembly with a 1/2" BSP captive nut.

Marking:

Hansgrohe on handset and riser rail.

Installation Requirements:

R001 R040

Expiry date:

31/01/2028

Model:

26 533 xxx 26 553 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of wall mounted brass bodied spout outlets (various finishes, see model) incorporating a plastic aerator. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0682

Size:

¾” BSP (M)

Marking:

AXOR on face plate

Installation Requirements:

R001 R040

Expiry date:

31/01/2028

Model:

38 411 xxx 45 410 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

A range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies (brass body, various finishes) incorporating a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout.

WRAS Approval Number:

2301051

Size:

½” BSP (F)

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R010 R040

Expiry date:

31/01/2028

Model:

71 732 XXX 71 734 XXX Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Supplied with click type pop-up waste. Maximum working pressure 10 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2301053

Size:

Stainless steel braided silicone lined flexible hose assemblies with 3/8" BSP captive nut end connections.

Marking:

Hansgrohe on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/01/2028

Model:

32 080 XXX XXX denotes finish, 000 = chrome, 800 – PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies (brass body with various finishes) incorporating quarter turn ceramic disc headworks and cube type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap with a single outlet and a fixed spout.

WRAS Approval Number:

2301056

Size:

½” BSP (F) (rough set)

Marking:

AXOR on spout

Installation Requirements:

R001 R010 R040

Expiry date:

31/01/2028

Model:

11 042 xxx Axor Urquiola 3-hole basin mixer 11 043 xxx Axor Urquiola 3-hole basin mixer Models are for use with rough 10303180 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of shower handsets with plastic bodies (various finishes). The inlet of the 24120xx0, 24101xx0, 24111xx0, 24110xx0 and 24100xx0 models incorporates a stainless-steel strainer. From November 2023 they can also incorporate a plastic strainer. The inlet of the 26077210 model added November 2023 incorporates a plastic strainer. The inlets of the 24101xx0, 24111xx0, 24121xx0 and 26077210 models also incorporate a plastic flow regulator.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2301058

Size:

½” BSP (M)

Marking:

Hansgrohe on face plate

Installation Requirements:

R001 R040

Expiry date:

31/01/2028

Model:

24120xxx - Pulsify S - Hand shower 105 1jet 24101xxx - Pulsify Select S - Hand shower 105 3jet Activation EcoSmart 24111xxx - Pulsify Select S - Hand shower 105 3jet Activation EcoSmart 24110xxx - Pulsify Select S - Hand shower 105 3jet Activation EcoSmart 24100xxx - Pulsify Select S - Hand shower 105 3jet Activation EcoSmart Models added November 2023: 26077210 - Pulsify Planet Edition - Hand shower 105 3jet Relaxation EcoSmart+ Select 24121xx0 - Pulsify S - Hand shower 105 1jet EcoSmart+ Where xxx or xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of floor mounted, single hole, single outlet fixed combination tap assembly (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a self- cancelling diverter to shower outlet. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0465 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2301060

Size:

To be used with rough kit - 10452180 which has 1/2" BSP (F) inlets

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R010 R040

Expiry date:

31/01/2028

Model:

32 532 xxx 31 471 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and or letters, as examples: 000 = chrome optic finish, 800 = PVD steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2301061

Size:

Stainless steel braided, thermoplastic silicone rubber (TPSiV) lined flexible hoses with a 3/8" BSP (F) end connectors.

Marking:

AXOR on Body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/01/2028

Model:

12 801 xxx Starck Eco Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of wall mounted shower blending valves (chromium plated brass). Flow is controlled by a quarter turn ceramic disc headwork and also diverts between overhead shower and hand shower with single lever operating member. The temperature is independently controlled via a thermostatic cartridge with single lever operating member that incorporates a manual override. Inlets incorporate stainless steel strainers and an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower handset, shower hose and overhead shower. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 70°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve with thermostatic temperature control

WRAS Approval Number:

2301063

Size:

¾” BSP (M) x ½” BSP (M) offset union

Marking:

Hansgrohe on body, shower head, hand shower and shower hose

Installation Requirements:

R001 R010 R040

Expiry date:

31/01/2028

Model:

27 253 400 hansgrohe Croma Select S showerpipe 180 2jet with Thermostat 27 254 400 hansgrohe Croma Select S showerpipe 180 2jet EcoSmart with Thermostat 27 255 400 hansgrohe Croma Select S showerpipe 180 2jet with single lever mixer 27 256 400 hansgrohe Croma Select E showerpipe 180 2jet with Thermostat 27 257 400 hansgrohe Croma Select E showerpipe 180 2jet EcoSmart with Thermostat

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Wall mounted manual blending shower valve with a brass body (chrome plated brass finish) incorporating a ceramic cartridge headwork with a single lever operating member. Also incorporates a self-cancelling diverter valve which diverts the flow between an overhead shower or shower handset. The outlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with a shower handset, shower hose and overhead shower. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

2000 Shower Valves

Section Subtitle:

Shower valve with manual temperature control.

WRAS Approval Number:

2301064

Size:

¾” BSP (M) x ½” BSP (M) offset union

Marking:

Hansgrohe on operating member, shower head, hand shower and shower hose

Installation Requirements:

R001 R040

Expiry date:

31/01/2028

Model:

27 258 400

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company