TEST SITE

Hansgrohe SE Approvals

#2203010

Range of single hole, single outlet, fixed, electronically controlled tap assemblies with brass bodies (various finishes), incorporating an electronic cartridge controlling the flow which is activated via an infrared sensor (either battery or mains powered). Models 31 171 xxx & 31 173 xxx incorporates a manually operated temperature control. The inlet adapters incorporate stainless steel filters and single check valve cartridges verified by test (suitable for backflow protection against Fluid Category 2 ). The spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap with a non-touch methods of flow control and a single inlet. Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2203010
Size:
Stainless steel braided, PEX lined flexible hose assemblies with 3/8” BSP captive nuts with a check valve adapter which has a 3/8” BSP (F) inlet.
Marking:
Hansgrohe on front of body.
Installation Requirements:
R001 R006 R009 R010 R570
Expiry date:
31/03/2027
Model:
Hansgrohe Focus Electronic basin mixer with temperature control: 31 171 xxx - battery-operated 31 173 xxx - 230 V mains connection Hansgrohe Focus Electronic basin mixer with temperature pre-adjustment: 31 172 xxx - battery-operated 31 174 xxx - 230 V mains connection Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval

#2203012

A range of wall mounted thermostatic blending valves with brass bodies (various finishes). The temperature is controlled via a thermostatic cartridge and dome operating member and flow is controlled via a quarter turn ceramic headwork. Product can come with one, two or three push type cartridges that divert the flow to various outlets (see model) The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve with thermostatic temperature control
WRAS Approval Number:
2203012
Size:
1/2" BSP (F) inlet and outlet (45 710 180 Basic set)
Marking:
AXOR on operating member
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2027
Model:
AXOR One thermostatic module 45 711 xxx – 1 function 45 712 xxx – 2 functions 45 713 xxx – 3 functions 45 710 180 – Basic set Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval

#2203015

Range of ceramic disc diverter cartridges with plastic bodies and silicon ‘O’-rings, for insertion into specifically dimensioned bores. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
Section Subtitle:
Headwork for installation into specifically dimensioned taps or shower valve bodies. Fittings listed in this section have undergone endurance and BS6920 testing in accordance with the requirements of the Regulators` Specification.
WRAS Approval Number:
2203015
Size:
32mm OD
Marking:
Hansgrohe on on body
Installation Requirements:
R001
Expiry date:
31/03/2027
Model:
30 587 500 AUV32 Shut-off and diverter valve 30 727 600 AUV32-1 Shut-off and diverter valve 30 727 610 AUV32-1 Shut-off and diverter valve
Product Images
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval

#2203017

Two-hole, single outlet swivel combination tap assembly in various finishes (see model) incorporating quarter turn ceramic disc headworks with a cross top operating members. The spout outlet incorporates a plastic aerator. Supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2203017
Size:
Stainless steel braided TPSIV lined flexible hose assembly incorporating 3/8" BSP captive nut end connection
Marking:
AXOR on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/03/2027
Model:
16 510 xxx AXOR Montreux 2 Where XXX denotes the surface finish (which is a non-water part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval

#2203018

Range of single hole, single outlet (swivel) combination tap assemblies, brass bodies (various finishes) incorporating quarter turn ceramic disc headworks with cross top operating members. The spout outlet incorporates a plastic aerator. Supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2203018
Size:
Stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections.
Marking:
Axor on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/03/2027
Model:
16 502 xxx AXOR Montreux (2-handle basin mixer 210 with cross handles and pop-up waste set). 16 505 xxx AXOR Montreux (2-handle basin mixer 160 with cross handles for hand washbasins with pop-up waste set). 16 506 xxx AXOR Montreux (2-handle basin mixer 210 with cross handles and waste set). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 16 of 64

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.