Wall mounted concealed modular thermostatic mixing valve (brass body). The product is supplied with a shower hose and handset and incorporates additional outlet ports to supply shower outlet configuations controlled by push button flow control headworks. Primary flow control is via a half turn ceramic disc headwork and dome type operating member. The temperature is controlled independently via a thermostatic cartridge and dome operating member. Inlets incorporate stainless steel strainers and single check valve cartirgdes however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve with thermostatic temperature control

WRAS Approval Number:

2006331

Size:

¾” BSP (F) inlets & ½” BSP (F) outlets

Marking:

Axor on faceplate and shower handset.

Installation Requirements:

R001 R010 R040

Expiry date:

30/06/2025

Model:

46 700 xxx AXOR EdgeThermostatic module Select 470/100 for concealed installation for 2 functions 46 701 xxx AXOR Edge Thermostatic module Select 470/100 for concealed installation for 2 functions - diamond cut 18 310 180 AXOR Basic set for thermostatic module Select for 2 functions. 46 710 xxx AXOR Edge Thermostatic module Select 540/100 for concealed installation for 3 functions 46 711 xxx AXOR Edge Thermostatic module Select 540/100 for concealed installation for 3 functions - diamond cut 18 311 180 AXOR Basic set for thermostatic module Select for 3 functions. 46 720 xxx AXOR Edge Thermostatic module Select 610/100 for concealed installation for 4 functions 46 721 xxx AXOR Edge Thermostatic module Select 610/100 for concealed installation for 4 functions - diamond cut 18 312 180 AXOR Basic set for thermostatic module Select for 4 functions. 46 730 xxx AXOR Edge Thermostatic module Select 680/100 for concealed installation for 5 functions 46 731 xxx AXOR Edge Thermostatic module Select 680/100 for concealed installation for 5 functions - diamond cut 18 313 180 AXOR Basic set for thermostatic module Select for 5 functions. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Wall mounted bath spout incorporating a brass body (various finishes) and a plastic aerator. Maximum operating temperature 60°C.

Section:

0682

Marking:

AXOR on top of spout. Urquiola on underside of spout.

Installation Requirements:

R001 R040

Expiry date:

31/10/2025

Model:

11 430 xxx AXOR Urquiola Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples; 000 = Chrome optic finish, 800 = PVD stainless steel optic

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Wall mounted spout outlet (various finishes, see model) incorporating a plastic flow straightener. Maximum operating temperature 60°C.

Section:

0682

Size:

¾” BSP (M)

Marking:

Hansgrohe on spout

Installation Requirements:

R001 R040

Expiry date:

31/08/2025

Model:

15 412 xxx Hansgrohe PuraVida Bath spout Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish & 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of brass shower arms and plastic shower heads (various finishes) incorporating EPDM seals and ‘O’-rings, silicone seals and spray insert. The 26 469 xxx model is ceiling mounted & 26 470 xxx model is wall mounted. Both models incorporate a swivel joint housing a plastic flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower heads and shower handsets

WRAS Approval Number:

2007054

Size:

½” BSP (M)

Marking:

Hansgrohe on edge of body

Installation Requirements:

R001 R040

Expiry date:

31/07/2025

Model:

26 469 xxx HG Raindance Select S Overhead shower 240 2jet EcoSmart 9 l/min with ceiling connector. 26 470 xxx HG Raindance Select S Overhead shower 240 2jet EcoSmart 9 l/min with shower arm. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator and an on/off button which can stop the flow of water. The inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2007075

Size:

Stainless steel braided PE-X lined flexible hose assemblies with ⅜” captive nut end connections.

Marking:

Hansgrohe on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/07/2025

Model:

72 820 xxx 72 825 xxx 73 854 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company