Range of plastic push-fit fittings (available in black, white and grey) and a manifold (available in grey only) with EPDM or NBR ‘O’-rings. For use with copper pipe (manufactured to EN1057), PE-X pipe (manufactured to BS7291-3:2010) & PB pipe (BS EN 21003-2:2008). Maximum working pressure: 12.5 bar @ 20°C (Cold water use only). From September 2023 the products are suitable for 8.0 bar @ 65°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303062

Size:

See models.

Marking:

JG logo and size moulded on the collet or body of fitting.

Installation Requirements:

R001 R008

Expiry date:

31/03/2028

Model:

GREY ACETAL FITTINGS COOLING MANIFOLD: NC2183 15mm x 3/8”. METRIC TO IMPERIAL ADAPTORS STRAIGHT CONNECTOR: NC462 15mm x ½”. UNEQUAL STRAIGHT CONNECTOR: NC2511 15mm x 3/8”. STEM TO TUBE ADAPTOR: NC2164 15mm x 3/8”, NC2173 15mm x ½”. STEM TO HOSE CONNECTOR: NC932 15mm x ½”. TUBE TO HOSE CONNECTOR: NC448 15mm x ½”, NC737 22mm x ½”, NC473 22mm x ¾”. ADAPTOR TEE: NC869 15mm x 15mm x 3/8”. STEM TO STEM ADAPTOR: NC478 15mm x 3/8”. ACETAL CM FITTINGS WITH EPDM O-RINGS FEMALE ADAPTOR WITH BSP THREAD: CM451513FS 15mm x 3/8”. TAP ADAPTOR WITH UNS THREAD: CM3210U7E 10mm x 7/16”. TAP ADAPTOR BSP THREAD: CM321014E 10mm x ½” BSP (F), CM3201S 15mm x ½” BSP (F). TAP ADAPTOR FLAT END BSP THREAD: CM321014FE 10mm x ½” BSP (F). TWO-WAY DIVIDER: CM2315W 15mm. STRAIGHT ADAPTOR BSP THREAD: CM011514S 15mm x ½” (M), CM011216S 22mm x ¾” (M). REDUCING STRAIGHT CONNECTOR: CM201510S 15mm x 10mm, CM201512W 15mm x 12mm. REDUCING ELBOW CONNECTOR: CM211210W 12mm x 10mm. SLIP CONNECTOR: CM-SC-15-S 15mm. STEM ELBOW: CM221515W 15mm x 15mm. BLACK ACETAL FITTINGS (METRIC SIZES) STRAIGHT ADAPTORS BSP THREAD: PM011012E 10mm x ¼” BSP (M), PM011013E 10mm x 3/8” BSP (M), PM011014E 10mm x ½” BSP (M), PM011513E 15mm x 3/8” BSP (M), PM011514E 15mm x ½” BSP (M), PM011516E 15mm x ¾” BSP (M), PM012216E 22mm x ¾” BSP (M). STRAIGHT ADAPTERS BSPT THREAD: PM011002E 10mm x ¼” BSPT (M), PM011003E 10mm x 3/8” BSPT (M), PM011004E 10mm x ½” BSPT (M). EQUAL STRAIGHT CONNECTORS: PM0410E 10mm, PM0415E 15mm, PM0422E 22mm. REDUCING STRAIGHT CONNECTORS: PM201004E 10mm x 4mm, PM201006E 10mm x 6mm, PM201008E 10mm x 8mm, PM201210E 12mm x 10mm. EQUAL ELBOW: PM0310E 10mm, PM0315E 15mm, PM0322E 22mm. REDUCING ELBOW CONNECTOR: PM211004E 10mm x 4mm, PM211006E 10mm x 6mm, PM211008E 10mm x 8mm, PM211210E 12mm x 10mm. STEM ELBOW: PM221010E 10mm x 10mm, PM221515E 15mm x 15mm, PM222222E 22mm x 22mm. SWIVEL ELBOW BSP THREAD: PM091012E 10mm x ¼”, PM091013E 10mm x 3/8”, PM091014E 10mm x ½”. SWIVEL ELBOW BSPT THREAD: PM091002E 10mm x ¼”, PM091003E 10mm x 3/8”, PM091004E 10mm x ½”. EQUAL TEE: PM0210E 10MM, PM0215E 15mm, PM0222E 22mm. REDUCING TEE: PM3022AE 22mm x 22mm x 15mm. SWIVEL TEE CENTRE LEG BSP THREAD: PM101012E 10mm x ¼”, PM101013E 10mm x 3/8”, PM101014E 10mm x ½”. SWIVEL TEE CENTRE LEG BSPT THREAD: PM101002E 10mm x ¼“, PM101003E 10mm x 3/8“, PM101004E 10mm x ½“. SWIVEL MALE RUN TEE BSP THREAD: PM111012E 10mm x ¼”, PM111013E 10mm x 3/8”, PM111014E 10mm x ½”. SWIVEL MALE RUN TEE BSPT THREAD: PM111002E 10mm x ¼“, PM111003E 10mm x 3/8“, PM111004E 10mm x ½“. BULKHEAD CONNECTOR: PM1210E 10mm, REDUCER: PM061210E 12mm x 10mm, PM061510E 15mm x 10mm, PM061512E 15mm x 12mm, PM061815E 18mm x 15mm, PM062215E 22mm x 15mm, PM062218E 22mm x 18mm. STEM ADAPTOR BSP THREAD: PM051012E 10mm x ¼” BSP (M), PM051013E 10mm x 3/8” BSP (M), PM051014E 10mm x ½” BSP (M), PM051513E 15mm x 3/8” BSP (M), PM051514E 15mm x ½” BSP (M), PM052214E 22mm x ½” BSP (M), PM052216E 22mm x ¾ ” BSP (M). STEM ADAPTOR BSPT THREAD: PM051002E 10mm x ¼” BSPT (M), PM051003E 10mm x 3/8” BSPT (M), PM051004E 10mm x ½” BSPT (M). TWO WAY DIVIDER: PM2310E 10mm, PM2315E 15mm. PLUG (RED & BLACK): PM0810R 10MM RED, PM0815E 15MM BLACK, PM0822E 22MM BLACK. END STOP: PM4615E 15mm, PM4622E 22mm. FEMALES ADAPTOR BSP THREAD: PM451015FE 10mm x 5/8”. U-BEND: PMUB15E 15mm. BACK PLATE ELBOW: 15PWB 15mm x ½” BSP. WHITE ACETAL FITTINGS BULKHEAD ELBOW: CM551516W 15mm x ¾” BSP.

Approval Holder:

Reliance Worldwide Corporation (UK) Ltd.

Company Name

Reliance Worldwide Corporation (UK) Ltd.

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

Phone

+44 (0)1895 449233

View All Listings by this Company

Manufacturer:

Reliance Worldwide Corporation (UK) Ltd.

Company Name

Reliance Worldwide Corporation (UK) Ltd.

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

Phone

+44 (0)1895 449233

View All Listings by this Company

Range of in-line, pressure reducing valves with DZR brass bodies and stainless-steel strainers. Maximum inlet supply pressure 16.0 bar. Outlet supply pressure is adjustable within the range of 1.5 bar to 6.0 bar. Maximum operating temperature 45°C or 65°C, please refer to model.

Section:

2200 Valves

Section Subtitle:

Pressure reducing.

WRAS Approval Number:

2304047

Size:

½” or ¾” BSP female or male inlet and outlet. 15mm or 22mm compression fitting inlet and outlet for use with copper pipe to BS EN 1057:2006+A1:2010.

Marking:

Reliance Water Controls, DN, DR, flow arrow and pressure on body.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

Cold water 312 Compact Series (operating temperature 45°C) comprising of models: PRED312020, PRED312025, PRED312001, PRED312005, PRED312010 & PRED312015. Hot water 312 Compact Series (operating temperature 65°C) comprising of models: PRED312070, PRED312071, PRED312075, PRED312076, PRED312050, PRED312055, PRED312060, PRED312061, PRED312065 & PRED312066.

Approval Holder:

Reliance Worldwide Corporation (UK) Ltd.

Company Name

Reliance Worldwide Corporation (UK) Ltd.

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

Phone

+44 (0)1895 449233

View All Listings by this Company

Range of tundishes with black plastic bodies. The products comply with the requirements of an air gap to drain.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0046 Backflow Prevention Devices

Section Subtitle:

Tundish

WRAS Approval Number:

2304078

Marking:

TUND219003, Syr & RWC logo on body TUND219005, Syr & RWC logo on body TUND219015, RWC, WRAS on body

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

TUND219003 ½” BSP (M) x 22mm compression TUND219005 15mm x 22mm compression TUND219015 22mm x 28mm compression

Approval Holder:

Reliance Worldwide Corporation (UK) Ltd.

Company Name

Reliance Worldwide Corporation (UK) Ltd.

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

Phone

+44 (0)1895 449233

View All Listings by this Company

“Heatguard Dual Thermostatic Mixing Valves”, range of T type thermostatic mixing valves with brushed chrome plated brass bodies. The inlets incorporate check valve cartridges (all models) and isolation valves (models HEAT110616 & HEAT110625 only). Check valve cartridges are verified by test (suitable for backflow protection against Fluid Category 2). Products also include stainless-steel strainers. Maximum working pressure 6 Bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve with thermostatic temperature control

WRAS Approval Number:

2305038

Size:

See models.

Marking:

HEAT110614- Reliance water controls and heatguard dual on cap, batch code in format D= Day, WW= Week, YY= Year and LL= Production line and product code R HGD (R = RWC, HGD = Heatguard) on body. HEAT110624- Reliance Logo and heatguard dual on cap, batch code in format D= Day, WW= Week, YY= Year and LL= Production line and product code R HGD (R = RWC, HGD = Heatguard) on body. HEAT110625 - Reliance Logo and heatguard dual on cap, batch code in format D= Day, WW= Week, YY= Year and LL= Production line and product code R HGD (R = RWC, HGD = Heatguard) on body, flow arrow and CR on angle service valve. HEAT110616 - Reliance Worldwide Corporation Logo On Cap. CR and Flow Arrow on Service Valves.

Installation Requirements:

R001 R120 R040

Expiry date:

31/05/2028

Model:

HEAT110614- 15mm compression 2 in 1 union heatguard dual TMV, HEAT110624- 22mm compression 2 in 1 union heatguard dual TMV, HEAT110625 - 22mm compression 4 in 1 union heatguard dual TMV, HEAT110616 – 15mm compression 4 in 1 union heatguard dual TMV.

Approval Holder:

Reliance Worldwide Corporation (UK) Ltd.

Company Name

Reliance Worldwide Corporation (UK) Ltd.

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

Phone

+44 (0)1895 449233

View All Listings by this Company

Range of horizontal or vertical expansion vessels with an EPDM membrane. Maximum working pressure 10.0 or 16.0 bar (please refer to model). Maximum operating temperature 100°C.

Section:

1000 Expansion Vessels

Size:

1” BSP (M), 1½” BSP (M) & 2” BSP (M).

Marking:

Zilio Industries Spa, AQUASYSTEM, model, max temp, max pressure CE and other technical information on label on body

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

XVES050070 35L VERT POT VESSEL WHITE PRE-SET 3.0 XVES050072 35L VERT POT VESSEL WHITE 2.2B XVES050075 35L VERT POT VES WHITE PRE 3BAR C/W BRK XVES050079 35L VERTICAL POT VESSEL 10BAR MAX 16. XVES050080 50L VERTICAL POT VESSEL BLUE PRE-SET 3.0 XVES050090 60L VERTICAL POT VESSEL BLUE PRE-SET 3.5 XVES050099 60L VERTICAL POT VESSEL 10BAR MAX 16 XVES050100 80L VERTICAL POT VESSEL BLUE PRE-SET 3.5 XVES050109 80L VERTICAL POT VESSEL 10BAR MAX 16 XVES050110 100L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050119 100L VERTICAL POT VESSEL 10BAR MAX 16 XVES050120 150L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050129 150L VERTICAL POT VESSEL 10BAR MAX 16 XVES050130 200L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050131 200L VERT POT VESSEL BLUE 2.1B XVES050139 200L VERTICAL POT VESSEL 10 BAR MAX 16 XVES050140 300L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050141 300L VERT POT VESSEL BLUE 2.1B XVES050149 300L VERTICAL POT VESSEL 10 BAR MAX 16 XVES050150 500L VERT POT VESSEL BLUE PRE-SET 3.5 XVES050160 750L VERTICAL POT VESSEL RED PRE-SET 4.0 XVES050170 1000L VERTICAL POT VESSEL RED PRE-SET 4

Approval Holder:

Reliance Worldwide Corporation (UK) Ltd.

Company Name

Reliance Worldwide Corporation (UK) Ltd.

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

Phone

+44 (0)1895 449233

View All Listings by this Company