HX range of brass compression fittings for use with copper tube to BS2871. Maximum working pressure 16.0 bar. Maximum operating temperature 85 °C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

2004346

Size:

SEE MODEL

Marking:

Hongxing & WRAS on body.

Installation Requirements:

R001

Expiry date:

30/04/2025

Model:

All dimensions are in mm unless stated. HX-001: 8×8, 10×10, 12×12, 15×15, 22×22, 28×28, 35×35, 42×42, 54×54, 15×15×82 (length), 22×22×82 (length). HX-002: 10×8, 12×8, 12×10, 15×8, 15×10, 15×12, 16×15, 22×15, 22×18, 28×15, 28×22, 35×22, 35×28. HX-003: 8×1/4" F, 8×3/8" F, 10×1/4" F, 10×3/8" F, 10×1/2" F, 12×1/4" F, 12×3/8" F, 12×1/2" F, 15×1/4" F, 15×3/8" F, 15×1/2" F, 15×3/4" F, 15×1" F, 22×1/2" F, 22×3/4" F, 22×1"F, 28×3/4" F, 28×1" F, 35×1 1/4"F, 42×1 1/2" F, 54×2". HX-004: 8×1/8"M, 8×1/4"M, 8×3/8"M, 8×1/2"M, 10×1/4"M, 10×3/8"M, 10×1/2"M, 12×1/4" M, 12×3/8"M, 12×1/2"M, 15×1/4"M, 15×3/8"M, 15×1/2"M, 15×3/4"M, 18×1/2"M, 18×3/4"M, 22×1/2"M, 22×3/4"M, 22×1"M, 22×1 1/4"M, 28×3/4"M, 28×1"M, 28×1 1/4"M, 35×1 1/4"M, 35×1 1/2"M, 42×1 1/2"M, 54×2"M. HX-005: 8×8, 10×10, 12×12, 15×15, 22×15, 22×22, 28×15, 28×22, 28×28, 35×35, 42×42, 54×54. HX-006: 8×1/4"F, 10×1/4"F, 10×3/8"F, 10×1/2"F, 12×3/8"F, 12×1/2"F, 15×3/8"F, 15×1/2"F, 15×3/4"F, 22×1/2"F, 22×3/4"F, 22×1"F, 28×1"F, 35×1 1/4"F, 42×1 1/2"F, 54×2"F. HX-007: 8×1/4"M, 8×1/2"M, 10×1/4"M, 10×3/8"M, 10×1/2"M, 12×1/4"M, 12×3/8"M, 12×1/2"M, 15×1/4"M, 15×3/8"M, 15×1/2"M, 15×3/4"M, 22×1/2"M, 22×3/4"M, 22×1"M, 28×1"M, 35×1 1/4"M, 42×1 1/2"M, 54×2"M. HX-008: 8×8×8, 10×10×10, 12×12×12, 15×15×15, 22×22×22, 28×28×28, 35×35×35, 42×42×42, 54×54×54. HX-009: 15×15×22, 22×15×15, 22×15×22, 22×22×15, 22×22×18, 28×22×15, 28×15×15, 28×28×15, 28×15×28, 28×22×22, 22×22×28, 28×28×22, 28×22×28, 35×35×15, 35×35×22, 35×35×28, 42×42×15, 42×42×22, 42×42×28, 42×42×35, 54×54×15, 54×54×22, 54×54×28, 54×54×35, 54×54×42. HX-010: 10×10×3/8“F, 12×12×3/8“F, 12×12×1/2“F, 15X15X1/4“F 15×15×1/2“F, 18×18×3/4“F, 22×22×1/2”F, 22×22×3/4”F, 28×28×1/2”F, 28×28×3/4”F, 28×28×1”F. 141029-1: 15×15×1/2“M. HSHX-013: 8, 10, 12, 15, 18, 22, 28, 35, 42, 54. HX-012: 15, 22, 28, 35, 42, 54. HX-011: 15×1/2"F three leg, 22×1/2"F three leg, 22×3/4"F three leg. HX-014: 15×1/2"F, 15×3/4"F, 22×3/4"F. HX-015: 15×1/2"F, 22×3/4"F.

Approval Holder:

Hongxing Manufacturing Group Ltd

Company Name

Hongxing Manufacturing Group Ltd

Address

Yanye, Qinggang, Yuhuan, Zhejiang

Phone

0086-576-87118156

General Email

sales@hongxingmfg.com

View All Listings by this Company

Manufacturer:

Hongxing Manufacturing Group Ltd

Company Name

Hongxing Manufacturing Group Ltd

Address

Yanye, Qinggang, Yuhuan, Zhejiang

Phone

0086-576-87118156

General Email

sales@hongxingmfg.com

View All Listings by this Company

Range of brass compression fittings for use with copper pipe (manufactured to EN 1057). For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011076

Size:

Se Model

Marking:

Lawton or Lawton tubes logo on nut Models added December 2020: Lawton Tubes, size and EN1254-2 on compression nut.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

Existing models: Coupler: DZRCOMCP010: 10×10 (10mm compression). DZRCOMCP015: 15×15 (15mm compression). Reducer coupler: DZRCOMCP01510: 15×10 (15mm × 10mm compression). Female iron coupling: DZRCOMCPFI0151/2: 15×1/2” F (15mm compression × ½” BSP Female). Male iron coupling: DZRCOMCPMI0081/4: 8×1/4"M (8mm compression × ¼” BSP Male). DZRCOMCPMI0103/8: 10×3/8"M (10mm compression 3/8” BSP Male). DZRCOMCPMI0151/2: 15×1/2"M (15mm compression × ½” BSP Male). DZRCOMCPMI0153/4: 15×3/4"M (15mm compression × ¾” BSP Male). Elbow: DZRCOMEL015: 15×15 (15mm compression). Female iron elbow: DZRCOMELFI0151/2: 15×1/2"F (15mm compression × ½” BSP Female). Male iron elbow: DZRCOMELMI0151/2: 15×1/2"M (15mm compression × ½” BSP Male). Tee: DZRCOMTE015: 15×15×15 (15mm compression). Female tee: DZRCOMTEFI015151/2: 15×15×1/2” F (15mm × 15mm × ½” BSP Female). Stop end: DZRCOMEC015: 15 (15mm compression). Tank connector: DZRCOMTC015: 15 (15mm compression). Wall plate elbow: DZRCOMELWL0151/2: 15×1/2"F three leg (15mm compression × ½” BSP Female three leg). Male iron coupler extended taper thread: DZRCOMETTCPMI0153/4: 15×3/4” (15mm compression × ¾” BSP Male). Models added December 2020: Coupler: DZRCOMCP022: 22×22 (22mm compression). DZRCOMCP028: 28×28 (28mm compression). Reducer coupler: DZRCOMCP02215: 22×15 (22mm × 15mm compression). Female iron coupling: DZRCOMCPFI0223/4: 22×3/4" F (22mm compression × ¾” BSP Female). DZRCOMCPFI0221: 22×1" F (22mm compression × 1” BSP Female). DZRCOMCPFI0281: 28×1" F (28mm compression × 1” BSP Female). Male iron coupling: DZRCOMCPMI0223/4: 22×3/4"M (22mm compression × ¾” BSP Male). DZRCOMCPMI0221: 22×1"M (22mm compression × 1” BSP Male). DZRCOMCPMI0283/4: 28×3/4"M (28mm compression × ¾” BSP Male). DZRCOMCPMI0281: 28×1"M (28mm compression × 1” BSP Male). Elbow: DZRCOMEL022: 22×22 (22mm compression). DZRCOMEL028: 28×28 (28mm compression). Female iron elbow: DZRCOMELFI0223/4: 22×3/4"F (22mm compression × ¾” BSP Female). DZRCOMELFI0221: 22×1"F (22mm compression × 1” BSP Female). DZRCOMELFI0281: 28×1"F (28mm compression × 1” BSP Female). Male iron elbow: DZRCOMELMI0223/4: 22×3/4"M (22mm compression × ¾” BSP Male). DZRCOMELMI0221: 22×1"M (22mm compression × 1” BSP Male). DZRCOMELMI0281: 28×1"M (28mm compression × 1” BSP Male). Tee: DZRCOMTE022: 22×22×22 (22mm compression). DZRCOMTE028: 28×28×28 (28mm compression). Reducer tee: DZRCOMTE0221515: 22×15×15 (22mm × 15mm × 15mm compression). DZRCOMTE0221522: 22×15×22 (22mm × 15mm × 22mm compression). DZRCOMTE0222215: 22×22×15 (22mm × 22mm × 15mm compression). DZRCOMTE0282815: 28×28×15 (28mm × 28mm × 15mm compression). DZRCOMTE0282822: 28×28×22 (28mm × 28mm × 22mm compression). Female tee: DZRCOMTEFI022221/2: 22×22×1/2” F (22mm × 22mm × ½” BSP Female). DZRCOMTEFI022223/4: 22×22×3/4” F (22mm × 22mm × ¾” BSP Female). Stop end: DZRCOMEC022: 22 (22mm compression). DZRCOMEC028: 28 (28mm compression). Tank connector: DZRCOMTC022: 22 (22mm compression). DZRCOMTC028: 28 (28mm compression). Wall plate elbow: DZRCOMELWL0223/4: 22×3/4"F three leg (22mm compression × ¾” BSP Female three leg). Straight tap connector: DZRCOMSTC0151/2: 15×1/2"F (15mm compression × ½” BSP Female). DZRCOMSTC0223/4: 22×3/4"F (22mm compression × ¾” BSP Female). Male iron coupler extended taper thread: DZRCOMETTCPMI0223/4: 22×3/4” (22mm compression × ¾” BSP Male).

Product Images

Approval Holder:

Lawton Tube Company Limited.

Company Name

Lawton Tube Company Limited.

Address

Torrington Avenue Tile Hill Coventry

Postcode

CV4 9AB

View All Listings by this Company

Manufacturer:

Hongxing Manufacturing Group Ltd

Company Name

Hongxing Manufacturing Group Ltd

Address

Yanye, Qinggang, Yuhuan, Zhejiang

Phone

0086-576-87118156

View All Listings by this Company

Range of wall mounted hose union taps with brass bodies, incorporating a rising spindle headwork with a ‘T’ type operating member. BC01L & BC01LA models are lockshield type. The BC01A & BC01LA models incorporate an approved check valve cartridge on the inlet and outlet however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1780 Taps

Section Subtitle:

Hose union tap. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building. Where in existing house installations a hosepipe is to be used from an existing hose union tap located outside a house and which is not provided with backflow protection, either: a. The existing hose union tap should be provided with a double check valve (Type EC or ED) located inside the building; or b. The tap should be replaced with a hose union tap that incorporates a double check valve (type HUK1); or c. A hose union backflow prevention (Type HA) or a double check valve should be continuously fitted to the outlet of the tap; or d. Is legally installed in any premises.

WRAS Approval Number:

2204309

Size:

½” BSP(M) & ¾” BSP(M)

Marking:

Hongxing on body.

Installation Requirements:

R001 R040

Expiry date:

30/04/2027

Model:

BC01, BC01L, BC01A, BC01LA

Product Images

Approval Holder:

Hongxing Manufacturing Group Ltd

Company Name

Hongxing Manufacturing Group Ltd

Address

Yanye, Qinggang, Yuhuan, Zhejiang

Phone

0086-576-87118156

General Email

sales@hongxingmfg.com

View All Listings by this Company

Range of lever or butterfly operated spherical valves with nickel plated brass bodies and brass ball with PTFE seat. Valves to be used with EN1057 copper pipe. Maximum working pressure: 25.0 Bar Maximum operating temperature: 85°C

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2207050

Size:

14.7mm, 15mm, 21mm, 22mm, 27.4mm, 28mm

Marking:

HONGXING and Size on body

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

BVE17A & BVE17AT

Product Images

Approval Holder:

Hongxing Manufacturing Group Ltd

Company Name

Hongxing Manufacturing Group Ltd

Address

Yanye, Qinggang, Yuhuan, Zhejiang

Phone

0086-576-87118156

General Email

sales@hongxingmfg.com

View All Listings by this Company

Manifold spherical valve with DZR brass body and ball (chrome plated), incorporating a single lever type operating members and a single check valve assembly (verified by test as suitable for backflow protection against Fluid Category 2). For use with with copper pipe manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2209302

Size:

15mm compression

Marking:

Hongxing on body, CR and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2027

Model:

‘HY003 15*15*1/2*1/2 manifold ball valve with check’.

Product Images

Approval Holder:

Hongxing Manufacturing Group Ltd

Company Name

Hongxing Manufacturing Group Ltd

Address

Yanye, Qinggang, Yuhuan, Zhejiang

Phone

0086-576-87118156

General Email

sales@hongxingmfg.com

View All Listings by this Company

Range of stop valves with brass bodies, EPDM gaskets and PTFE wear rings and packings. Compression connection to be used with copper pipe EN1057. Maximum working pressure 16.0 bar. Maximum operating pressure 85°C

Section:

2310 Valves

Section Subtitle:

Stop, metal, screw down.

WRAS Approval Number:

2305330

Size:

SEE MODEL

Marking:

Hongxing and size on body.

Installation Requirements:

R001 R120

Expiry date:

31/05/2028

Model:

ST01 – Stop cock with compression connections: 14.7mm*14.7mm, 15mm*15mm, 20mm*20mm, 21mm*21mm, 22mm*22mm, 25mm*25mm, 27.4mm*27.4mm, 28mm*28mm, 15mm*25mm, 15mm*20mm, 22mm*25mm. ST01L – Stop cock with compression connections and lockshield: 15mm*15mm, 22mm*22mm. ST03 – Stop cock with BSP (F) connections: ½” *1/2”, ¾” *3/4”, 1” *1”.

Approval Holder:

Hongxing Manufacturing Group Ltd

Company Name

Hongxing Manufacturing Group Ltd

Address

Yanye, Qinggang, Yuhuan, Zhejiang

Phone

0086-576-87118156

General Email

sales@hongxingmfg.com

View All Listings by this Company