Range of shower handsets incorporating chromium plated plastic or chromium plated brass bodies (see model). Inlets incorporate a plastic flow regulator. Maximum operating temperature 60°C.
Range of shower handsets incorporating flow regulators on the inlets available in chrome and matte black finishes. Maximum operating temperature 60°C.
Range of two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C
Range of overhead shower outlets with chromium plated plastic bodies. Maximum working temperature 75°C.
Wall mounted thermostatic blending valve (chrome plated brass), incorporating a quarter turn ceramic disc headwork. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. Both using dome type operating members. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection and EPDM washers incorporating stainless-steel strainers. The product is supplied with an approved shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature is 85°C.
Range of wall mounted thermostatic shower valves (various finishes) incorporating a quarter turn ceramic disc headworks with single lever type operating members. The temperature is controlled independently via a thermostatic cartridge with manual override and single lever type operating members. Both inlets incorporate approved single check valve cartridges (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). The valves are supplied with a variety of shower kits that consist of shower hoses, shower handsets and riser rail assemblies. Model is supplied with a flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C
Range of shower kits consisting of shower handsets, shower hoses and riser rail assemblies.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted thermostatic blending valves (chrome plated brass), incorporating a quarter turn ceramic disc, half turn ceramic disc or ceramic cartridge headworks (see models). The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button, with a variety of operating members. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection with stainless-steel strainers. Maximum working pressure 5.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted thermostatic blending valves (various finishes) incorporating a quarter turn ceramic disc headworks with single lever type operating members. The temperature is controlled independently via a thermostatic cartridge with manual override and single lever type operating members. The inlets incorporate stainless-steel EPDM strainer washers and approved single check valve cartridges (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). The products are supplied with shower hose, shower handset and riser rail assembly. Maximum operating pressure 5.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Deck mounted two-hole, single outlet, fixed combination tap assembly (chrome plated brass) incorporating a quarter turn ceramic disc headwork with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge incorporating a single lever operating member and a manual override button. The spout outlet incorporates a lockable diverter to shower outlet and a plastic aerator. The inlets incorporate EPDM washers and approved check valve cartridges, (however, the complete product has not been fully tested to demonstrate it provides backflow protection). Maximum operating pressure 5.0 bar
Non-metallic materials and components comply with BS6920 at 60°C
Range of shower kits consisting of (chrome or matte black plated) shower hose, handset, and riser rail assemblies.
Non-metallic materials and components comply with BS6920 at 60°C
Shower handset with a chromium plated brass body and flow regulator.
Non-metallic materials and components comply with BS6920 at 60°C
Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass), Models DLT113 & DLT113B incorporates quarter turn ceramic disc headworks with single lever operating members. Models DCM113, DCM113B, MILAN113 & TUD113 incorporates, non-rising spindle headworks with dome or cross-top operating members. The spout outlets incorporate a plastic flow straightener. The products are supplied with a lever operated pop-up waste. Maximum working pressure 10.0 bar. Max operating temperature 85°C.
Range of two hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating quarter turn ceramic disk headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The products are supplied with metal backnuts. Maximum working pressure 6 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted thermostatic bar shower mixers (chrome plated brass bodies), incorporating quarter turn ceramic disc headworks controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. Model RYBS01 incorporates cube type operating members. The inlets incorporate stainless-steel EPDM strainer washers and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with shower hoses, shower handsets and riser rail assemblies. Maximum working pressure 5.0 Bar
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted thermostatic bar shower mixers, (brass bodies - various finishes), incorporating two way diverter valve controlling the flow with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating members that incorporate a manual override button. The inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower hose, handset and overhead shower and riser rail assembly. The handset with model RTSDEF also incorporates a flow regulator. Maximum working pressure 10 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted,two hole,single outlet,thermostatically controlled combination tap assemblies (Chromium plated brass). Flow is controlled between the spout outlet and overhead shower by a 2 way ceramic disc diverter with adome type operating member. Temperature is controlled via a thermostatic cartridge with adome type operating member and a manual override button. The spout outlet can be turned 90 degrees to divert the flow to a further shower outlet. The spout outlet incorporates a plastic aerator. Each inlet incorporates a stainless steel strainer and approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of wall mounted, electronically operated combination tap assembly (chrome plated brass body). The flow is controlled by a solenoid valve which is actuated via an infrared sensor. The spout outlets incorporate a plastic aerator. The solenoid valve inlet incorporates a plastic and stainless steel filter. The products are supplied with a triple layered connecting hose (PVC inner and outer layer and nylon braided middle layer). Maximum working pressure 8.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Electronically operated combination tap assembly, (chrome plated brass body). The flow is controlled by a solenoid valve which is actuated via an infrared sensor on the spout. The spout outlet incorporates a plastic aerator. The product is supplied with a stainless steel braided (EPDM or PEX lined) flexible connecting hose. Maximum working pressure 8.0 bar
Non-metallic materials and components comply with BS6920 at 60°C
Self-closing tap assembly (chrome plated brass body), incorporating a non-concussive headwork with a dome type operating member. The spout outlet incorporates an aerator or flow straightener. The product is supplied with metal back nuts. Maximum working pressure 3.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Page 8 of 10
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
