Two hole, double outlet swivel combination tap assembly ( stainless steel body) incorporating ceramic cartridge headworks with lever type operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts. The spout incorporates a mixed hot water outlet and separate outlet intended to be supplied by an instantaneous water heater (not included on this approval) to dispense near boiling water. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:

0570 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a double outlet and a swivel spout.

WRAS Approval Number:

2210362

Size:

Stainless-steel braided PEX lined flexible hose assemblies with ½” BSP (F) captive nut end connections.

Marking:

Caple (Brand of Maurice Lay Distributors Ltd) on body

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2027

Model:

FOS/4IN1/SS, FOS/4IN1/BS, FOS/4IN1/GM, FOS/4IN1/CO, FOS/4IN1/GD

Approval Holder:

Maurice Lay Distributors Ltd

Company Name

Maurice Lay Distributors Ltd

Address

Fourth Way Avonmouth Bristol

Postcode

BS11 8DW

Phone

0117 938 1900

General Email

info@caple.co.uk

View All Listings by this Company

Range of in-line water filters with polypropylene bodies. Maximum working pressure 8.5 bar. Cold water use only.

Non-metallic materials and components comply with BS6920 at cold water use only°C

Section:

1050 Filters and Housings

WRAS Approval Number:

2305080

Size:

Refer to model

Marking:

PURITI1, WRAS, pressure & temp on adhesive label on body.

Installation Requirements:

R001 R008 R150 R170 R290

Expiry date:

31/05/2028

Model:

GAC/Scale inhibitor: PURITI1 10”: 3/8” plain spigot

Approval Holder:

Maurice Lay Distributors Ltd

Company Name

Maurice Lay Distributors Ltd

Address

Fourth Way Avonmouth Bristol

Postcode

BS11 8DW

Phone

0117 938 1900

General Email

info@caple.co.uk

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2309336

Size:

Stainless steel braided, PEX lined hose assemblies incorporating ½” captive nut end connections.

Marking:

Caple logo ((trade-mark of Maurice Lay Distributors Ltd.) on body.

Installation Requirements:

R001 R006 R009

Expiry date:

30/09/2028

Model:

SL7/CH

Approval Holder:

Maurice Lay Distributors Ltd

Company Name

Maurice Lay Distributors Ltd

Address

Fourth Way Avonmouth Bristol

Postcode

BS11 8DW

Phone

0117 938 1900

General Email

info@caple.co.uk

View All Listings by this Company

Range of single-hole, single outlet, (swivel), combination tap assemblies (brass bodies – various finishes) incorporating quarter turn ceramic disc headworks with single lever operating members. Models (ASP2/CH, ASPQ2/CH & SLD2CH) incorporate ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature - see models.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2310018

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP captive nut end connections.

Marking:

Caple logo on body

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2028

Model:

Maximum operating temperature 60°C ASPQ2/CH SLD2/CH LAM/BC LAM/CH ZUBQ4/CH Maximum operating temperature 65°C ASP2/CH AVE4/BC AVE4/BN AVE4/CH WAS4/BN WAS4/CH S/CRU5/CH S/CRU5/PTR S/CRU5/AB Finish: CH = Chrome BN = Brushed nickel BC = Blackened copper PTR = Pewter AB = Antique brass

Approval Holder:

Maurice Lay Distributors Ltd

Company Name

Maurice Lay Distributors Ltd

Address

Fourth Way Avonmouth Bristol

Postcode

BS11 8DW

Phone

0117 938 1900

General Email

info@caple.co.uk

View All Listings by this Company