Single hole single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic flow aerator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2007808

Size:

Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.

Marking:

TP ON BASE

Installation Requirements:

R001 R090

Expiry date:

31/07/2025

Model:

546885

Approval Holder:

Travis Perkins Plc

Company Name

Travis Perkins Plc

Address

Divisional Office Lakeside House Bedford

Postcode

NN4 7HD

Phone

+44 (0) 1604 503457

View All Listings by this Company

Two hole metal single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts, hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

2005366

Size:

¾” BSP (M)

Marking:

TP on body

Installation Requirements:

R001 R006 R030

Expiry date:

31/05/2025

Model:

120768 COMBINATION TAP ASSEMBLY

Approval Holder:

Travis Perkins Plc

Company Name

Travis Perkins Plc

Address

Divisional Office Lakeside House Bedford

Postcode

NN4 7HD

Phone

+44 (0) 1604 503457

View All Listings by this Company

Range of thermostatic mixing valves incorporating brass bodies (chrome plated). The flow is controlled by quarter turn ceramic disc headwork, with dome or cube type operating members, which also diverts the flow between multiple shower outlets. The temperature is controlled by a thermostatic cartridge with dome or cube type operating members. Both inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete products have not been fully tested to demonstrate that they provide backflow protection. The products are supplied with a shower hose, shower handset and overhead shower outlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve with thermostatic temperature control

WRAS Approval Number:

2011900

Size:

15mm compression

Marking:

TP (Travis Perkins logo) on rear of body.

Installation Requirements:

R001 R010 R040

Expiry date:

30/11/2025

Model:

555971 Yewdale & 555972 Langden

Product Images

Approval Holder:

Travis Perkins Plc

Company Name

Travis Perkins Plc

Address

Divisional Office Lakeside House Bedford

Postcode

NN4 7HD

Phone

+44 (0) 1604 503457

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet can incorporate either a plastic flow straightener or a plastic aerator. When supplied with a plastic flow straightener there is a combined EPDM washer and stainless steel strainer behind it. The products are available either as a version with a pop-up waste or one with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110805

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

TP ON REAR OF TAP BODY

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2026

Model:

295313 LOWTHER BASIN MIXER COMBINATION TAP ASSEMBLIES

Approval Holder:

Travis Perkins Plc

Company Name

Travis Perkins Plc

Address

Divisional Office Lakeside House Bedford

Postcode

NN4 7HD

Phone

+44 (0) 1604 503457

View All Listings by this Company

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork, single lever operating members and self- cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener & the products are supplied with metal backnuts. The product includes a shower hose and handset. Maximum working pressure 10.0 bar. Maximum working temperature 70°C.

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

2012377

Size:

¾” BSP (M).

Marking:

TP on rear of tap body.

Installation Requirements:

R001 R030

Expiry date:

31/12/2025

Model:

604587 Lowther Bath Shower Mixer combination tap assembly

Approval Holder:

Travis Perkins Plc

Company Name

Travis Perkins Plc

Address

Divisional Office Lakeside House Bedford

Postcode

NN4 7HD

Phone

+44 (0) 1604 503457

View All Listings by this Company