TEST SITE

PPI Xiamen Industry Co Ltd Approvals


#2310376

Range of wall mounted shower arms (stainless steel bodies - various finishes). Maximum operating temperature 100 °C

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2310376
Size:
½” BSP (M)
Marking:
PPI on Flange
Expiry date:
31/10/2028
Model:
229206 229206 MBK1 229206 BGP

Approval Holder:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2310048

Range of single hole, single outlet (fixed) combination tap assemblies ( brass bodies - various finishes), incorporating either a ceramic cartridge or ceramic disc (see models) headworks with either a single lever or cross top (see models) operating member. The spout outlet incorporates either a plastic aerator, a plastic flow straightener or an open outlet type spout (see models). Some models are supplied with a click type waste and some are supplied with a lever type pop-up waste (see models). Maximum working pressure 5.0 Bar or 10.0 Bar (see models) Maximum operating temperature 65.0°C or 85.0°C (see models)

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2310048
Size:
Stainless Steel braided EPDM lined flexible hoses incorporating 1/2” BSP captive nut end connections. Stainless steel braided EPDM or (PEX) lined flexible hose assemblies incorporating 1/2" captive nut end connections for models ( 174538, 179638, 179608F, 179608F GF, 179108 & 172908 )
Marking:
Marking: PPI logo on rear of tap body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2028
Model:
Model: 5.0 Bar, 65°C Models: 102028 (Chrome, Cart, SL, FS, PA, CW) M3228HM (Chrome, Cart, SL, FS, PA, CW) 153338 (Chrome, Cart, SL, FS, PA, CW) 181038 (Chrome, Cart, SL, PA, FS, CW) 174538 (Chrome, Cart, SL, PA, CW) 179638 (Chrome, Cart, SL, PA, CW) 5.0 Bar, 85°C Models: 900528 (Chrome, Cart, SL, FS, PA, CW) 173628 (Chrome, Cart, SL, OO, CW) 173628 MBK1 (Matt Black, Cart, SL, OO, CW) 173638 (Chrome, Cart, SL, OO, CW) 173638 MBK1 (Matt Black, Cart, SL, OO, CW) 10.0 Bar, 65°C Models: 172728 (Chrome, Cart, SL, PA, CW) 179608F (Chrome, CD, CT, PA, FS, PUW) 179608F GF (Gold, CD, CT, PA, FS, PUW) 179108 (Chrome, CD, CT, PA, FS, PUW) 172908 (Chrome, CD, SL, PA, PUW) For codes in brackets after each model name: Chrome = Chrome Plated Finish, Matt Black = Matt Black Finish Gold = Gold Plated Finish Cart = Ceramic Cartridge Headworks CD = Ceramic Disc Headworks SL = Single Lever Operating Member CT – Cross Top Operating Member FS = Flow Straightener, PA = Plastic Aerator OO = Open Outlet PUW = Pop Up Waste CW = Click Waste

Approval Holder:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2311901

Range of wall mounted, thermostatic bar shower mixer (chrome plated brass body), incorporating a quarter turn ceramic disc headwork that controls the flow with a dome operating member. Temperature is controlled independently via a thermostatic cartridge with dome type operating member that incorporates a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. This product is supplied with an overhead shower, handset, shower hose and a riser rail assembly that incorporates a manual diverter that controls flow from overhead shower and shower handset. Maximum working pressure 5.0 bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve with thermostatic temperature control
WRAS Approval Number:
2311901
Size:
15mm Compression
Marking:
PPI on body
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2028
Model:
238753 A

Approval Holder:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2311911

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator or flow straightener. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2311911
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
PPI on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2028
Model:
177007 177007 BN 177007 MBK1 177007 BGP 177009 177010 177011 177011 AB 177011BN 177011A 177011A BN 177013 147016 FINISHES: BN = Bright Nickel, MBK1 = Matt Black, BGP = Brushed Brass & AB = Antique Bronze.

Approval Holder:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval


#2311343

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass bodies), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull down spray type and incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2311343
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating 15mm compression connections.
Marking:
PPI on Body
Installation Requirements:
R001 R090
Expiry date:
30/11/2028
Model:
177014

Approval Holder:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 22 of 23

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.