TEST SITE

Intatec Ltd Approvals


#2309925

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a sequential headwork controlling both flow and temperature with single lever type operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2309925
Size:
Model IT1008CP 10mm copper tails Model IT1008FT Stainless steel braided EPDM flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Model, date of manufacture (MM/YY) on body. Inta on operating member.
Installation Requirements:
R001 R006
Expiry date:
30/09/2028
Model:
IT1008CP IT1008FT

Approval Holder:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2004011

Wall mounted, exposed bar type thermostatic blending valve (chromium plated brass), incorporating a quarter turn ceramic disc controlling the flow with single lever operating members. The temperature is controlled independently via a thermostatic cartridge with single lever operating members. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve with thermostatic temperature control
WRAS Approval Number:
2004011
Size:
20014CP - PLUS BAR SHOWER THERMOSTATIC BLENDING VALVES
Marking:
Intatec and 20014CP on rear of tap body.
Installation Requirements:
R001 R010 R040
Expiry date:
30/04/2025
Model:
20014CP - Plus Bar Shower.

Approval Holder:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2004045

Range of chrome plated plastic shower handsets with EPDM ‘O’-rings and flow restrictor. Maximum operating temperature 60ºC.

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2004045
Size:
½” BSP (M)
Marking:
Intatec logo on body.
Installation Requirements:
R001 R040
Expiry date:
30/04/2025
Model:
ED300019XX, HS1010CP, HS1007CP, HS1008CP, HS1009CP, PU900002XX & SO81659CP.

Approval Holder:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2007701

Wall mounted exposed thermostatic blending valve (chromium plated brass body) incorporating a half turn ceramic disc headwork controlling the flow to either the overhead shower or hand shower with a dome type operating member. The temperature is controlled via thermostatic cartridge with a manual override button and dome type operating member. The inlets incorporate stainless steel strainers and approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve with thermostatic temperature control
WRAS Approval Number:
2007701
Size:
¾” captive nuts
Marking:
Inta logo, model and date of manufacture (MM/YY) on rear of body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2025
Model:
PU20010CP

Approval Holder:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2006018

Non-verifiable single check valve assembly with chrome plated DZR brass body. Maximum working pressure 14.0 bar. Maximum operating temperature 85ºC.

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
2006018
Size:
15mm compression x 15mm compression.
Marking:
Intatec logo, CR and flow arrow on body
Installation Requirements:
R001
Expiry date:
30/06/2025
Model:
SCV15

Approval Holder:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 13

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.