TEST SITE

Grohe AG Approvals


#2209308

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork and single lever operating member.The spout outlet incorporates a plastic aerator Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2209308
Size:
Polyamide braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections
Marking:
Grohe on operating member. Grohe and other technical information on rear of body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/09/2027
Model:
33281003, 33281DC3, 32441002, 30465000 & 30465DC0
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2205343

Range of angled shower wall outelts with brass bodies (various finishes - see model). The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2205343
Size:
½” BSP (M).
Marking:
Grohe etched on body.
Installation Requirements:
R001 R040
Expiry date:
31/05/2027
Model:
Euphoria Cube 26.370.XXX. Where XXX denotes finish and can be replaced by: 000 - Chrome. A00 - Hard Graphite, AL0 - Brushed Hard Graphite, DC0 - SuperSteel, DL0 - Brushed Warm Sunset, GL0 - Cool Sunrise and GN0 - Brushed Cool Sunrise, 001 - StarLight Chrome, DA1 - Warm Sunset, BE1 - Polished Nickel, EN1 - Brushed Nickel.
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2210015

A range of overhead shower outlets with chromium plated brass bodies. The inlet of all models incorporate plastic filters. The inlet of all models, except 28.778.000, incorporate plastic flow restrictors. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2210015
Size:
½” BSP female
Marking:
Grohe on shower face
Installation Requirements:
R001 R040
Expiry date:
31/10/2027
Model:
Rainshower Cosmopolitan 310 27.477.000. Rainshower Cosmopolitan 400 28.778.000. Rainshower Cosmopolitan 210 28.368.000. Rainshower Cosmopolitan 210 28.368.00E. Rainshower Rustic 210 28.369.000. Rainshower F-Series 27.271.000 27.470.000. 27.479.000.
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2210317

Range of wall mounted, thermostatic shower valves with brass bodies (various finishes). Flow is controlled with a ceramic disc headwork with a single lever operating member. Temperature is controlled independently by a thermostatic cartridge with a single lever operating member with a manual override button. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve with thermostatic temperature control
WRAS Approval Number:
2210317
Size:
¾” BSP (M) x ½” BSP (M) offset union
Marking:
Grohe on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2027
Model:
Grotherm 2000 range: 34446001 34463001
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2210337

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2210337
Size:
Nylon braided, PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections.
Marking:
Grohe on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2027
Model:
23330001 BauEdge
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 8 of 24

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.