TEST SITE

Bristan Group Limited Approvals


#2109905

Range of single hole, single outlet fixed combination tap assemblies (chrome plated brass) incorporating a ceramic cartridge headworks with single lever operating member. The spout outlets incorporate a plastic aerator. Model (PM BAS C) is supplied with a lever type pop-up waste. Maximum operating pressure 7.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2109905
Size:
Stainless steel braided, PEX lined hose assembly with 15mm compression end connections.
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/09/2026
Model:
PM BAS C PM BASNW C.
Product Images

Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2109906

Two hole, single outlet fixed combination tap assembly (chrome plated brass) incorporating quarter turn ceramic disc headwork with cross-top operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal back nuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout.
WRAS Approval Number:
2109906
Size:
¾” BSP (M)
Marking:
Bristan on body
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2026
Model:
DX BF C
Product Images

Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2109907

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) incorporating quarter turn ceramic disc headworks with cross-top operating members. The inlet hose assemblies incorporate a servicing valve and is supplied with a single check valve assembly verified by test (suitable for backflow protection against Fluid Category 2). The spout outlets incorporate a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2109907
Size:
Stainless steel braided EPDM hose assemblies incorporating ½” captive nut end connections/15mm compression.
Marking:
Bristan on body
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2026
Model:
K SNK EF C - (Chrome) K SNK EF C TO - (Chrome Tap Only) K SNK EF BN - (Brush Nickle) K SNK EF BN TO - (Brush Nickle Tap Only) K SNK EF ARBZ - (Antique Bronze) K SNK EF ARBZ TO - (Antique Bronze Tap Only)
Product Images

Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2109908

Two hole, single outlet (swivel) combination tap assembly (various finishes) incorporating quarter turn ceramic disk headwork with cross-top operating members. The inlets incorporate approved single check cartridges however the complete assembly has not been tested to demonstrate it provides back flow prevention. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2109908
Size:
½” BSP (M)
Marking:
Bristan Colonial on indice
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2026
Model:
K BRSNK C (Chrome) K BRSNK BN (Brush Nickle) K BRSNK ABRZ (Antique Bronze)
Product Images

Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2109909

Wall mounted thermostatic bar shower valve, riser rail, shower handset, shower hose and overhead shower outlet. The valve incorporates a brass body (chrome plated) and ceramic disc headwork with dome type operating member which controls and diverts the flow between the two shower outlets. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. The inlets incorporate stainless steel filters and a single check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve with thermostatic temperature control
WRAS Approval Number:
2109909
Size:
½” BSP offset union
Marking:
Cascade on bar valve body
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2026
Model:
023.1818.3
Product Images

Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company
Manufacturer:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2109911

Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated brass bodies) incorporating quarter turn ceramic disc headwork with cross-top operating members. The inlet hose assemblies incorporate a servicing valve and is supplied with a single check valve assembly verified by test (suitable for backflow protection against Fluid Category 2). The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2109911
Size:
Stainless steel braided EPDM hose assemblies incorporating ½” captive nut end connections/15mm compression.
Marking:
Bristan on body
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2026
Model:
PCN EFSNK C PCN EFSNK C TO – (Tap Only)
Product Images

Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2109912

Range of single hole, single outlet fixed combination tap assemblies (chrome plated brass), incorporating a ceramic cartridge headwork with single lever operating members. The spout outlets incorporates a plastic aerator. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2109912
Size:
Stainless steel braided EPDM hose assemblies incorporating ½” captive nut end connections/15mm compression.
Marking:
Bristan on body (models BQBEA BAS C & CLI BAS C) Bristan on operating member (NR BASNW C)
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2026
Model:
BQBEA BAS C CLI BAS C NR BASNW C
Product Images

Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2109910

Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated brass), incorporating quarter turn ceramic disc headworks. The inlet hose assemblies incorporate a servicing valve and is supplied with a single check valve assembly verified by test (suitable for backflow protection against Fluid Category 2). The spout outlets incorporate a plastic aerator. Maximum working pressure 10.00 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2109910
Size:
Stainless steel braided EPDM hose assemblies incorporating ½” captive nut end connections/15mm compression.
Marking:
Bristan on body
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2026
Model:
CSH EFSNK C CSH EFSNK C TO - (Tap Only)
Product Images

Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2110348

Range of overhead showers and shower handsets with plastic body (various finishes). Overhead shower inlets incorporate a stainless steel strainer Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2110348
Size:
Overhead showers – ½” BSP (F) Shower Handsets – ½” BSP (M)
Marking:
Bristan on face plate on overhead showers Bristan on handle on shower handsets
Installation Requirements:
R001 R040
Expiry date:
31/10/2026
Model:
Overhead Showers: 40QD00136CP 40QD00136SP 40QD00136DH 40QD00136ZG Shower Handsets 40QS00150CP 40QS00150SP 40QS00150DH 40QS00150ZG 40QS00151CP 40QS00151SP 40QS00151DH 40QS00151ZG Models added October 2022: 40QS00150SA, 40QS00150QX, 40QS00151SA, 40QS00151QX.
Product Images

Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2110351

Range of two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members and a lockable diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose, shower handset and metal backnuts Maximum working pressure 5.0 bar. Maximum operating temperature 60°C. .

Section:
0525 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout, incorporating a semi-automatic (lockable) diverter to a shower outlet.
WRAS Approval Number:
2110351
Size:
¾”BSP (M)
Marking:
Bristan on body
Installation Requirements:
R001 R006 R020
Expiry date:
31/10/2026
Model:
CLI BSM C NR BSM C BQBEA BSM C
Product Images

Approval Holder:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 11 of 32

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.