Range of heat interface units (HIU) with either twin or single stainless steel copper brazed plate heat exchangers (depending on model) providing heating and hot water (twin unit) hot water only, or heating only. The hot water is generated via a plate heat exchanger. The primary (space heating) circuit incorporates an expansion vessel and a pressure relief valve (set at 3.0 bar). The product incorporates a CAb backflow prevention device (suitable for backflow protection against Fluid Category 3) for filling the heating circuit. The inlet and outlet of all circuits incorporate a lever operated spherical valve. Maximum working pressures and operating temperatures: Primary (district heating): 10.0 bar and 85˚C. Domestic hot water (DHW): 10.0 bar and 60˚C. Secondary (space heating): 2.5 bar and 80˚C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2011358

Size:

22mm solder fitting

Marking:

Albion water management, model and other tech info on data label on the side panel.

Installation Requirements:

R001 R140

Expiry date:

30/11/2025

Model:

[Twin Unit]: Standard Twin Plate – heating with 24 plates and hot water with either 14 or 40 plates. Heating connection to cold water by filling loop. Products: TH000240 MTA TWIN 24-40 TH000214 MTA TWIN 24-14 TH001240 MTA TWIN 24-40 HM TH001214 MTA TWIN 24-14 HM [Hot Water Only]: Hot water with either 14 or 40 plates, connection direct to cold water. Products: TH000414 MTA HOT WATER ONLY 00-14 TH000440 MTA HOT WATER ONLY 00-40 TH001414 MTA HOT WATER ONLY 00-14 HM TH001440 MTA HOT WATER ONLY 00-40 HM [Heating Only]: Heating with 40 plates on domestic heating circuit only, connection to cold water via filling loop. Products: TH000340 MTA HEATING ONLY 40-00 TH001340 MTA HEATING ONLY 40-00 HM ‘HM’ stands for heat meter which is on the heating circuit

Product Images

Approval Holder:

Albion Water Management

Company Name

Albion Water Management

Address

30-31 Station Close, Potters Bar, Hertfordshire

Postcode

EN6 1TL

Phone

01707 607230

General Email

water@albiongroup.co.uk

View All Listings by this Company

Manufacturer:

Albion Water Management

Company Name

Albion Water Management

Address

30-31 Station Close, Potters Bar, Hertfordshire

Postcode

EN6 1TL

Phone

01707 607230

General Email

water@albiongroup.co.uk

View All Listings by this Company

'Albiseal'. Blue coloured, liquid PTFE anaerobic sealant. For use with water up to 85°C. This product is to be applied and cured in strict accordance with the manufacturer's instructions.

Section:

5520 Sealants - Screwed Joints

Section Subtitle:

Anaerobic adhesives. These products are to be applied and cured in strict accordance with the manufacturer's instructions

WRAS Approval Number:

2210533

Expiry date:

31/10/2027

Approval Holder:

Albion Water Management

Company Name

Albion Water Management

Address

30-31 Station Close, Potters Bar, Hertfordshire

Postcode

EN6 1TL

Phone

01707 607230

General Email

water@albiongroup.co.uk

View All Listings by this Company