Section Code 5240 : Components. All components listed in this section have been tested for water contact suitability of material only.
Back To Directory Sections'Hydropriv PE100 Pipe'. Black coloured (with blue external stripes), extruded PE100 pipe. In January 2024, blue coloured, extruded PE100 'Hydropriv PE100 Pipe' was added to the approval. Both pipes are for use with water up to 23°C.
'Uponor Aqua Pipe'. White coloured, extruded PE-Xa pipe. For use with water up to 85°C.
'PE002'. Blue coloured, extruded HDPE pipe. Between May 2020 and 2nd December 2021, the pipe was for use with water up to 23°C. Between 3rd December 2021 and 31st May 2025, the pipe is for use with water up to 60°C.
'S-Lon HDPE Pipe'. Blue coloured, extruded HDPE pipe. For use with water up to 65°C.
'Reno 100'. Black coloured (with blue external stripes), extruded polyethylene pipe. For use with water up to 23°C.
'Reno 100+'. Dual layered, extruded polyethylene pipe comprising of a black coloured inner and blue coloured outer layer. For use with water up to 23°C.
'Dura.Blu PE 100 Ring (Blue)'. Blue coloured, extruded, ring-shaped polyethylene fitting. For use with water up to 65°C.
'Dura.Blu PE100 Fabricated Fitting'. Blue coloured polyethylene fitting manufactured by extrusion and butt fusion/weding jointing. For use with water up to 65°C.
'Cosmoplast LDPE Pipe'. Black coloured, extruded LDPE pipe. For use with water up to 65°C.
'Fox Spigot and Electrofusion Fittings'. Black coloured, injection moulded polyethylene (PE 100-RC) spigot and electrofusion fittings. For use with water up to 65°C.
'Godavari HDPE Pipe (manufactured from Alathon L4904 & Black masterbatch)'. Black coloured (with blue external stripes), extruded HDPE pipe. For use with water up to 23°C.
'Viega Raxofix PE-Xc/Al/PE-Xc Multilayer Pipe'. Extruded PE-Xc/Al/PE-Xc multilayer pipe comprising of a black coloured PE-Xc inner layer, aluminium middle layer and grey coloured PE-Xc outer layer. For use with water up to 70°C.
'Viega Raxofix, PE-RT/Al/PE-RT Multilayer Pipe'. Extruded, multi-layered pipe comprising of a black coloured PE-RT inner layer, aluminium middle layer and grey coloured PE-RT outer layer. For use with water up to 70°C.
'Hepworth PE 80 & PE 100 Pipes'. The extruded PE 80 pipes are black coloured. The extruded PE 100 pipes are either black or blue coloured. For use with water up to 60°C.
'FRIALEN Safety Fitting' (manufactured from Eltex TUB121). Black coloured (opaque), injection moulded PE100 electrofusion fitting. For use with water up to 60°C.
'D.63 Spigot and Electrofusion Fittings'. Black coloured, injection moulded PE100 fittings. For use with water up to 23°C.
'FRIALEN Safety Fitting' (manufactured from Hostalen CRP 100 black). Black coloured (opaque), injection moulded PE100 electrofusion fitting. For use with water up to 60°C.
'RAK Universal Plastic Industries L.L.C. HDPE PE100 Black Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 85°C.
'Qual-PEX Barrier Pipe'. Triple layered, extruded pipe consisting of a white coloured PEX inner & outer layer and a grey coloured EVOH middle layer. For use with water up to 85°C.
'Polyatlas PE100 Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 23°C.
'Pexlife XPE-SIL'. Black coloured, extruded polyethylene pipe. For use with water up to 23°C.
'Cosmoplast HDPE & MDPE Pipes'. Black coloured, extruded polyethylene pipes. For use with water up to 60°C.
'Supreme HDPE Pipe TSIL N'. Black coloured (with blue stripe), extruded polyethylene pipe. For use with water up to 23°C.
'PALCONN PEX-AL-PEX Pipe'. Multi-layered, extruded pipe comprising of a transparent PEX inner layer, aluminium middle layer and white coloured PEX outer layer. For use with water up to 85°C.
'Elofit'. Black coloured, injection moulded, PE100 electrofusion & spigot fittings. For use with water up to 85°C.
'SOFTPEX V® hose inliner'. Off white coloured (translucent), extruded polyethylene hose. For use with water up to 70°C.
'Parixit HDPE Pipe'. Blue coloured, extruded HDPE pipe. For use with water up to 60°C.
'Parixit HDPE Fitting'. Blue coloured, injection moulded HDPE fitting. For use with water up to 60°C.
'Kuzeyboru HDPE 100 Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 23°C.
'Superpipe PE-RT Type 2 Pipe'. Multi-layered, extruded pipe consisting of a white coloured (translucent) PE-RT inner layer, aluminium middle layer and white coloured (opaque) PE-RT outer later. For use with water up to 85°C.
'Revolve M-2638 Black'. Black coloured, polyethylene material manufactured by rotational moulding. For use with water up to 85°C.
'Amiantit Roto Tanks'. White coloured (opaque), LLDPE tank panel manufactured by rotational moulding. For use with water up to 23°C.
'Flomasta Qual-PEX Pipe'. Triple layered, extruded pipe consisting of a white coloured PEX inner & outer layer and a grey coloured EVOH middle layer. For use with water up to 85°C.
'Black LDPE Tube (IPETHENE 4203) and Semi-White LDPE Tube (IPETHENE 4203)'. Black or white coloured, extruded LDPE tubes. For use with water up to 45°C.
'Yildiz Polietilen Fitting (Coupler)'. Black coloured, injection moulded HDPE coupler fitting. For use with water up to 60°C.
`HDPE-IPF Pipe`. Black coloured, extruded HDPE Pipe. For use with water up to 85°C.
'CP Polytec 80A'. Extruded polyethylene pipe comprising of a blue coloured outer layer and black coloured inner layer. For use with water up to 23°C.
'FYPBK-01 PE Pipes Black & Blue'. Extruded, HDPE pipes which are either black coloured (with blue, external stripe) or blue coloured. For use with water up to 65°C.
'FYFBK-01 PE Fittings Black & Blue'. Injection moulded, HDPE fittings which are either black coloured or blue coloured. For use with water up to 65°C.
'Floplast Qual-PEX Barrier Pipe'. Triple layered, extruded pipe consisting of a white coloured PEX inner & outer layer and a grey coloured EVOH middle layer. For use with water up to 85°C.
‘ELGEF PE-100 electrofusion fittings’, Black coloured, injection moulded polyethylene electrofusion fittings. For use with water up to 65°C.
'MMP PE100 Pipe'. Black coloured (with blue coloured external stripes), extruded PE100 pipes manufactured from 'Sabic P6006' or 'Borouge HE3490-LS'. For use with water up to 85°C.
'Popular HDPE Pipe'. Black coloured (blue external stripes), extruded HDPE pipe. For use with water up to 60°C.
'Lasertec Multilayer Compound Pipes (White)'. Extruded PE-RT/Al/PE-RT pipe comprising of a black coloured, PE-RT Type 2 inner layer, aluminium outer layer and white coloured PE-RT outer layer. For use with water up to 70°C.
'GF PE100 Pipe (product codes beginning with '20014Y')'. Black coloured (with blue external stripes), extruded polyethylene pipe. For use with water up to 23°C.
'Unidelta Flexall'. Extruded, PE-RT/Al/PE-RT pipe comprising of white coloured (translucent) inner layer, aluminum middle later and white coloured (opaque) outer layer. For use with water up to 85°C.
'3301 black (330160415BLK)'. '3301 black (330130415BLK)' was added to the approval in November 2023. Black coloured, single sided polyethylene foam tapes with acrylic adhesive system. For use with water up to 23°C.
'Alpertsol PERT/AL/PERT Pipe'. Extruded, composite pipe comprising of a white coloured PERT inner layer, aluminium middle layer and white coloured PERT outer layer. For use with water up to 85°C.
`Como-Pex Pipe`. Extruded, white coloured HDPE pipe. For use with water up to 85°C.
‘Union Pipes Industry – K.S.A. HDPE Pipe’, manufactured from ‘P6006’ by Union Pipes Industry Co. Ltd, Rabigh, Saudi Arabia. Black coloured, extruded HDPE pipe. For use with water up to 60°C.
'BORFIT HDPE fittings'. Black coloured, injection moulded HDPE fittings. For use with water up to 60°C.
'Dhara HDPE Black Pipe'. Black coloured (with blue outer stripes), extruded HDPE pipe. For use with water up to 65°C.
'Dhara MDPE Blue Pipe'. Blue coloured, extruded MDPE pipe. For use with water up to 65°C.
'LSPE-BE002 PE Pipe (Deep Blue)'. Blue coloured, extruded polyethylene pipe. For use with water up to 60°C.
'LSPE-BE002 PE Fitting (Deep Blue)'. Blue coloured, injection moulded polyethylene fitting. For use with water up to 60°C.
'LSPE-BK001'. Black coloured, extruded polyethylene pipe. For use with water up to 60°C.
'LSPE-BK001'. Black coloured, injection moulded polyethylene fitting. For use with water up to 60°C.
'ajpipe HDPE Pipe'. Black coloured (with blue external stripes), extruded PE100 pipe. For use with water up to 50°C. From January 2024 the pipe is for use with water up to 60°C.
'Sureline I'. Black coloured (with blue longitudinal lines), extruded PE100 pipe. For use with water up to 23°C.
'QPLAST Pressure Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 23°C.
'100 US Gallon Dubai Polytank Panel'. Triple layered, rotationally moulded LLDPE tank panel comprising of a white coloured inner layer, black coloured middle layer and white coloured outer layer. For use with water up to 65°C.
'Radius Systems Socket Fittings and Saddle Fittings'. Black coloured, injection moulded PE fittings. For use with water up to 60°C.
'Revolve 6402U'. White coloured (translucent), polyethylene material manufactured by rotational moulding. For use with water up to 85°C.
'PE-BWG'. Transparent, extruded, single layer, polyethylene hose. In July 2023, 'PE-BWG Black', a black coloured (opaque), extruded, single layer, polyethylene hose was added to the approval. For use with water up to 85°C.
'Al Bassam High Density Polyethylene Underground Water Tank Panel'. Black coloured, blow moulded HDPE tank panel which is available with three or four layers (of the same material). For use with water up to 65°C.
'Al Bassam High Density Polyethylene Aboveground Water Tank Panel'. Blow moulded HDPE tank panel which comprises of four layers and has a black coloured water contact layer, red and black coloured inner layers and white coloured outer (non-water contact) layer. For use with water up to 65°C.
'Heliklima PE-RT/AL/PE-RT pipes'. Triple layered, extruded pipe comprising of a white coloured (translucent) inner layer, aluminium middle layer and white coloured (opaque) outer layer. For use with water up to 85°C.
'BKBB-660'. Black coloured LLDPE 'buoyant body' manufactured by rotational moulding. For use with water up to 23°C.
'XSPE-GPE01'. Black coloured (with blue stripes), extruded polyethylene pipe. For use with water up to 23°C.
'WTST1 Water Tank Sealing Tape'. Black coloured PE foam tape which is adhesive on the non-water contact side. For use with water up to 23°C.
‘EURO electrofusion fitting'. Black coloured, injection moulded HDPE electrofusion fitting. For use with water up to 85°C.
'Shield MDPE Fitting'. Black coloured, injection moulded PE80 fitting. For use with water up to 85°C.
'Shield MDPE Pipe'. Black coloured, extruded PE80 pipe. For use with water up to 85°C.
'SP-01 HDPE Fitting'. Black coloured, injection moulded HDPE fittings. For use with water up to 23°C.
`Comisa' pipe. Triple layered, extruded pipe consisting of a translucent PE-RT inner layer, aluminum middle layer and white coloured PE-LMD outer layer. For use with water up to 85°C.
'+GF+ HAKAN PE-RT White Pipe'. White coloured (opaque), extruded PE-RT pipe. For use with water up to 85°C.
'+GF+ HAKAN PE-XB White Crosslinked Pipe'. White coloured (opaque), extruded PE-XB pipe. For use with water up to 85°C.
'+GF+ HAKAN PE-RT EVOH Pipe'. Extruded pipe with a white coloured (opaque) PE-RT inner layer and an orange coloured EVOH outer layer. For use with water up to 85°C.
`Water Line`. Black coloured (with external blue stripes), extruded polyethylene pipe. For use with water up to 23°C.
'AO Roto Water Tank Panel'. White coloured, LLDPE tank panel manufactured by rotational moulding. For use with water up to 60°C.
'PlastFast/Plast Electrofusion Fittings'. Black coloured, injection moulded HDPE electrofusion fittings. For use with water up to 85°C.
'Uponor Combi Pipe'. Multi-layered, extruded PEX pipe comprising of an uncoloured (translucent) inner layer, uncoloured EVOH middle layer and white coloured outer layer. For use with water up to 85°C.
'Como-Flex'. Black coloured and blue coloured, extruded polyethylene pipes. For use with water up to 23°C.
'Aion MDPE Pipe'. Blue coloured, extruded MDPE pipe. For use with water up to 65°C.
'Aion HDPE Pipe'. Black coloured (with blue stripe), extruded HDPE pipe. For use with water up to 65°C.
`HYDROFAS'. Black coloured, extruded polyethylene (PE 80) pipe. For use with water up to 23°C.
'Retiflex PE-Xb'. Translucent, white coloured, extruded, single-layered PE-Xb tubing. For use with water up to 85°C.
'LIC PEX-b'. White (translucent), extruded PEX-b pipe. For use with water up to 85°C.
'Green Pipes HDPE Pipes'. Black coloured (with blue external stripe), extruded HDPE pipe. For use with water up to 65°C.
'Green Pipes HDPE Fittings'. Black coloured (with blue external stripe), fabricated butt-fusion HDPE fittings. For use with water up to 65°C.
'PF Press'. Triple layered, extruded pipe comprising of a white coloured (translucent) inner layer, aluminium middle layer and white coloured (opaque) outer layer. For use with water up to 85°C.
'XD PE Fitting'. Black coloured, injection moulded polyethylene fitting. For use with water up to 60°C.
'NEWPRO HDPE Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 65°C.
`Peak Pipe Systems PE100 Pipe`. Dual layered, co-extruded polyethylene pipes consisting of a black coloured inner and blue coloured outer layer. For use with water up to 23°C.
'Pextec Plus Silver'. Triple layered, extruded pipe consisting of a black coloured PE-Xc inner layer, an aluminium middle layer and a silver/grey coloured PE-Xc outer layer. For use with water up to 70°C.
'Pextec Plus White'. Triple layered, extruded pipe consisting of a black coloured PE-Xc inner layer, an aluminium middle layer and a white coloured PE-Xc outer layer. For use with water up to 70°C.
'Hewing MT PE-Xc/AL/PE-X multi layer pipe'. Extruded, multi-layered pipes comprising of an off-white (translucent), PEX-Xc inner layer, aluminium middle layer and white coloured (opaque), PE-Xb outer layer. For use with water up to 85°C. Please note that the pipes will be marked with 'WRAS 2111538'. Pipes which do not have this marking are not covered by the scope of the approval.
'Instantor® Pex'. Translucent, white coloured, extruded, single-layered PE-Xb tubing. For use with water up to 85°C.
'Lasertec PE-RT/Al Multi-layered Pipe'. Extruded PE-RT pipe comprising of a black coloured inner, aluminium barrier layer and silver-grey coloured outer layer. For use with water up to 70°C.
'DBS0420-DBS0640'. Orange coloured HDPE ball float, manufactured by blow moulding. For use with water up to 23°C.
'CPI Electrofusion fittings'. Black coloured, injection moulded HDPE fittings. For use with water up to 65°C.
'CPI HDPE Pipes'. Black coloured (with blue external stripes), extruded HDPE pipes. For use with water up to 65°C.
'NAFF ZPE PE40 LDPE'. Black coloured (with blue external stripes), extruded LDPE pipe. For use with water up to 23°C.
'CORREX®, Q-GUARD® & S-PATRON® PE-Xc Anode Frame (Clip)'. Cream coloured, injection moulded PE-Xc clip components. For use with water up to 85°C.
'CORREX®, Q-GUARD®, S-PATRON® & HYTONIC® PE-Xc Anode Gasket'. Cream coloured, injection moulded PE-Xc gaskets. For use with water up to 85°C.
'002DP48 Aiva Electrofusion Fittings'. Blue coloured, injection moulded HDPE electrofusion fittings. For use with water up to 23°C.
'Kott-Glide 2.0'. Black coloured, extruded HDPE pipe. For use with water up to 85°C.
‘Kingbull PE100 blue pipe (391721)'. Blue coloured, extruded polyethylene pipe. ‘Kingbull PE100 black pipe’ (0103102). Black coloured (with external blue stripe), extruded polyethylene pipe. Both for use with water up to 65°C.
'EGPI HDPE BL-W Pipe'. Black coloured, (with blue coloured external stripe), extruded HDPE pipe. For use with water up to 85°C.
'C40'. White coloured, extruded polyethylene pipe. For use with water up to 85°C.
'K9'. White coloured, extruded polyethylene pipe. For use with water up to 85°C.
'Polygon Polyethylene Pipe'. Black coloured or blue coloured, single layered, extruded polyethylene pipe. For use with water up to 23°C.
'LSPE-BE001 PE Pipe (Blue)'. Blue coloured, extruded polyethylene pipe. For use with water up to 60°C.
'Georg Fischer HDPE PE100 Black Machined Fabricated Fittings and Segmented Fabricated Fittings'. Black coloured, HDPE PE100, machined fabricated fittings. Black coloured, with or without blue stripe, extruded and fabricated, HDPE PE100 fabricated segmented fittings. For use with water up to 60°C.
'EB AQUAFLEX Cable'. Blue coloured, extruded polyethylene electrical cable. For use with water up to 23°C. Please note that, due to the way this cable was tested, this approval is valid only when the outer sheath is the layer in contact with water.
‘Kingbull PE100 blue pipe (391721)'. Blue coloured, extruded polyethylene pipe. ‘Kingbull PE100 black pipe’ (0103102). Black coloured (with external blue stripe), extruded polyethylene pipe. Both for use with water up to 65°C.
'HDPE 100 Black POLIMAXX P901BK'. Black coloured, extruded HDPE pipe. For use with water up to 65°C.
'HDPE 100 Blue POLIMAXX P901BL'. Blue coloured, extruded HDPE pipe. For use with water up to 65°C.
'Protecta-line Pipes PE80 & PE100 Pipes'. Extruded, multi-layered pipes comprising of a black coloured PE80 or PE100 inner layer, aluminium middle layer and blue coloured PE80 or PE100 outer layer. The pipes have a black external stripe. For use with water up to 23°C.
'Polygon Polyethylene Fittings'. Black coloured, injection moulded PE fittings. For use with water up to 23°C.
'Vialli PEXa Pipe'. White coloured (translucent), extruded PEXa pipe. For use with water up to 85°C.
'Hewing PE-Xc PENTA Pipe (off-white)', consisting of an off-white (natural) extruded polyethylene inner and outer layer with an EVOH (oxygen barrier) middle layer. 'Hewing PE-Xc PENTA Pipe (beige)', consisting of a beige coloured extruded polyethylene inner and outer layer with an EVOH (oxygen barrier) middle layer. Both for use with water up to 85°C.
'PRESTO electrofusion fitting'. Black coloured, injection moulded, polyethylene electrofusion fitting. For use with water up to 23°C.
'Radius Systems Puriton II LB Pipe'. Extruded, triple layered pipe consisting of a black coloured polyethylene inner layer, aluminium middle layer and blue coloured polyethylene outer layer. For use with water up to 23°C.
'IRRIPLASTEC PE 100 WATER'. Dual layered, extruded pipe comprising of a white coloured (opaque), PE inner layer and a black coloured, PE outer layer. For use with water up to 23°C.
'004DP44 Aiva Composite Saddle'. Blue coloured, injection moulded HDPE fitting. For use with water up to 23°C.
'PRESTO electrofusion tapping saddles'. Blue coloured, injection moulded polyethylene electrofusion tapping saddles. For use with water up to 23°C.
'Al Jubail PE100 Pipe'. Black coloured, extruded HDPE Pipe. For use with water up to 70°C.
'DH-01 Pipe'. Blue coloured, extruded HDPE pipe. For use with water up to 65°C.
'DH-02 Fitting'. Blue coloured, injection moulded HDPE fitting. For use with water up to 65°C.
'PEXROMA PE-Xa pipe'. Off-white coloured (translucent) polyethylene pipe. For use with water up to 85°C.
`Hydro Dynamic PE100 Pipes`. Black coloured, extruded polyethylene pipes. For use with water up to 60°C.
'Shield PE100 Segmented Fittings'. Black coloured fittings manufactured by extrusion and butt-fusion. For use with water up to 85°C.
'Shield PE 100 Pipe'. Black coloured, extruded PE100 pipe. For use with water up to 85°C.
'Plastherm PEXa Pipe'. White coloured, opaque, extruded PEXa pipe. For use with water up to 85°C.
'Unatherm Yellow'. Light yellow coloured, extruded PE-Xc pipe. For use with water up to 85°C.
'Unatherm White'. Off-white coloured, extruded PE-RT pipe. For use with water up to 85°C.
'Poseidon Cable' (3 x 1.5mm, 4 x 1.5mm, 3 x 1.0mm & 4 x 1mm). Blue coloured (external water contact layer), extruded, XLPE electrical cable. For use with water up to 65°C.
'Maximetal PERT-AL-PERT Pipe'. Extruded, multi-layered pipe comprising of a natural (appears white coloured/translucent) inner layer, aluminium barrier layer and white coloured outer layer. For use with water up to 85°C.
"Reinert-Ritz PE 100 Fittings". Black coloured, extruded polyethylene fittings. For use with water up to 85°C.
'Jain HDPE (PE 100) Blue Pipe'. Blue coloured, extruded HDPE pipe. For use with water up to 65°C.
'Jain HDPE (PE 100) Black Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 60°C.
‘VP1620-WR & VP-2020-WR’. Single layer, cream coloured, extruded PEX-b tubes. For use with water up to 85°C.
‘Al Bilad Polyethylene and Polypropylene Pipes Factory HDPE Pipe’. Black coloured, extruded HDPE pipe. For use with water up to 65°C.
'Radius Systems Light Blue SC80 Pipe'. Extruded, dual layered pipe consisting of a black coloured PE80 inner layer and blue coloured PE80 outer layer. For use with water up to 23°C.
'POLYAOUN non-insulated Water Tank Panel'. LDPE tank panel, made by roto-moulding, comprising of a white coloured inner & outer layer and black coloured middle layer. For use with water up to 85°C.
'POLYAOUN insulated Water Tank Panel'. LDPE tank panel, made by roto-moulding, comprising of white coloured, inner and outer layer, black coloured 2nd layer and grey coloured 3rd layer. For use with water up to 85°C.
'SPS HDPE Pipe'. Black coloured (with blue stripes), extruded PE 100 pipe. For use with water up to 85°C.
'JRG Sanipex MT Multilayer Pipe'. Triple layered, extruded PE-Xc/Al/PE-Xb pipe consisting of a cream coloured inner, aluminium barrier layer and black coloured outer layer. For use with water up to 85°C.
'SAPPCO PE100 Black Pipe'. Black coloured, extruded polyethylene pipe which has blue stripes on the outside. For use with water up to 65°C.
'Weixing HDPE Pipes'. Black (with blue stripe) or blue coloured, extruded HDPE pipes. For use with water up to 23°C. From January 2023 the pipes are suitable for use with water up to 85°C.
‘Viega Smartpress PE-Xc/Al/PE-Xc Multilayered pipe’. Extruded, multi-layered pipe comprising of a natural (appears clear, translucent) PE-Xc inner layer, aluminium barrier layer and white coloured PE-Xc outer layer. For use with water up to 70°C.
‘Viega Smartpress PE-Xc/Al/PE-Xc Multilayered pipe’. Extruded, multi-layered pipe comprising of a black coloured PE-Xc inner layer, aluminium barrier layer and white coloured PE-Xc outer layer. For use with water up to 70°C.
'Weixing HDPE Fitting blue'. Blue coloured, injection moulded HDPE fitting. Added in January 2023: 'Weixing HDPE Fitting black'. Black coloured, injection moulded HDPE fitting. For use with water up to 85°C.
'Borfit HDPE Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 60°C.
'Shield HDPE PE 100 Fittings'. Black coloured, injection moulded PE100 fittings. For use with water up to 85°C.
‘Dura-Line HD100 B Pipe’. Black coloured (with blue stripes), extruded HDPE pipe. For use with water up to 60°C.
'PE-BWG'. Transparent, extruded, single layer, polyethylene hose. For use with water up to 85°C.
'NTG PE100 Fittings'. Black coloured, injection moulded HDPE fittings. For use with water up to 60°C.
'Polypipe Blue PE 80 Pipe'. Blue coloured, extruded polyethylene pipe. For use with water up to 23°C.
'Polypipe Black PE80 Pipe'. Black coloured, extruded polyethylene pipe. For use with water up to 23°C.
'Supreme PE Electrofusion Fittings'. Black coloured, injection moulded polyethylene (PE 100) electrofusion fittings. For use with water up to 65°C.
'Trustlene PE-80 Fittings'. Black coloured, injection moulded, PE80 electrofusion fittings. For use with water up to 23°C.
'DR-PLAST HDPE PE-100 Pipes'. Black coloured (with dark blue stripe), extruded HDPE pipe. For use with water up to 60°C.
'DR-PLAST HDPE PE-100 Fittings'. Black coloured, HDPE fittings manufactured by either injection moulding or butt fusion welding. For use with water up to 60°C.
'Poly Emirates LLDPE Water Tank Panel'. Multi-layered LLDPE tank panel. manufactured by rotational moulding, which comprises of a white coloured inner & outer layer and a black coloured middle layer. For use with water up to 85°C.
'CLH Hose'. Single layer, extruded, clear (transparent), LDPE hose. For use with water up to 70°C.
'Aura HDPE Electrofusion Fittings'. Black coloured, injection moulded HDPE (PE100) electrofusion fittings. For use with water up to 65°C.
'Mais' pipe. Black coloured (with blue external stripes), extruded, PE100 HDPE pipe. For use with water up to 65°C.
'Flow Reducer Bp V2 ½ 34 9957, Flow reducer Bp V2 ½ short 34 9965 blue & Flow reducer Bp V2 3/8 short 34 9966 blue’. Blue coloured, injection moulded HDPE flow reducers. For use with water up to 23°C.
'Filter 99 3/8 349971 Dark Grey & Filter 99 ½ 349970 Light Grey'. Grey coloured, injection moulded HDPE filters. For use with water up to 23°C.
'ITS PE100 Fittings'. Black coloured, extruded polyethylene fitting. For use with water up to 60°C.
'Trustlene PE-80 Fittings'. Blue coloured, injection moulded, PE80 electrofusion fittings. For use with water up to 23°C.
'Neproplast HDPE PE100 Pipes'. Black coloured, extruded HDPE pipes. For use with water up to 60°C.
'Kingbull PE100 Blue Fitting (391740)'. Blue coloured, injection moulded polyethylene fitting. 'Kingbull PE100 Black Fitting (0103208)'. Black coloured, injection moulded polyethylene fitting. Both for use with water up to 65°C.
'Sierra PE-100 pipes'. Blue coloured, extruded PE-100 pipes. For use with water up to 65°C.
'Iglidur® UW160 Bearing'. Grey coloured, injection moulded PE bearing. For use with water up to 85°C.
'Kingbull PE100 Blue Fitting (391740)'. Blue coloured, injection moulded polyethylene fitting. 'Kingbull PE100 Black Fitting (0103208)'. Black coloured, injection moulded polyethylene fitting. Both for use with water up to 65°C.
'Pipex PERT-AL-PERT Pipe'. Extruded, multi-layered pipe comprising of a natural (appears white coloured/translucent) inner layer, aluminium barrier layer and white coloured outer layer. For use with water up to 85°C.
'UGPM HDPE Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 60°C.
'P600 BL & P301E BL'. Black coloured, extruded polyethylene pipes. For use with water up to 23°C.
'GPS Black PE100 Type V Pipe'. Black coloured, extruded PE100 pipe. For use with water 23°C.
'Prineto'. Black coloured, extruded PE-X pipe. For use with water up to 85°C.
'Topline PE100 HDPE Electrofusion/Butt Fusion Fitting'. Black coloured, injection moulded, PE100 (HDPE) fitting. For use with water up to 23°C.
'S-Ion PE100 Fittings'. Blue coloured, injection moulded PE100 fittings. For use with water up to 65°C.
'GPS Excel Black PE100 Pipe'. Black coloured, extruded PE100 pipe. For use with water up to 23°C.
'LK PAL Universal Pipe'. Extruded, multi-layered pipes comprising of a translucent PE-RT inner layer, aluminium barrier layer and white coloured PE-RT outer layer. For use with water up to 85°C.
'SABFUSE'. Black coloured, injection moulded polyethylene fittings. For use with water up to 60°C.
'National Brand PE Pipe'. Blue coloured, extruded PE100 pipe. For use with water up to 65°C.
'Plumtek Pipe & Euroaqua Pipe'. Grey coloured, extruded PE-RT Pipe. For use with water up to 85°C.
'EPPI-PE'. Black coloured, extruded HDPE pipe. For use with water up to 60°C.
'UPIPIPE'. Black coloured, extruded HDPE pipe. For use with water up to 60°C.
'PUHUI HDPE Pipe Black' & 'PUHUI HDPE Pipe Blue'. Extruded HDPE pipes available in black & blue colours. For use with water up to 85°C.
'PUHUI HDPE Fittings Black' & 'PUHUI HDPE Fittings Blue'. Injection moulded HDPE fittings available in black & blue colours. For use with water up to 85°C.
'Agruline Fitting'. Black coloured, injection moulded, polyethylene fitting. For use with water up to 85°C.
'LHS001P'. Off-white (translucent), extruded PEX hose. For use with water up to 60°C.
'SCGC HDPE H1000PCH Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 85°C.
'Almuftah Water Tank Panel'. LLDPE panel consisting of a white coloured inner and outer layer and a black coloured middle layer, manufactured by rotational moulding. For use with water up to 55°C.
'Jingtong HDPE Pipe'. Black coloured (with blue external lines), extruded HDPE pipes. For use with water up to 65°C.
'Jingtong HDPE Fitting'. Black coloured, injection moulded HDPE fittings. For use with water up to 65°C.
'Presto Sealing Ring'. White coloured (opaque), injection moulded PE sealing ring. For use with water up to 23°C.
'Taldeen Electrofusion Fitting'. Black coloured, injection moulded, PE100 Electrofusion Fitting. For use with water up to 85°C.
'Taldeen PE100 Pipe'. Black coloured (with blue external stripe), extruded, PE100 Pipe. For use with water up to 85°C.
'Jain HDPE (PE 100) Blue Fittings). Blue coloured HDPE fittings manufactured by injection moulding or extrusion. For use with water up to 65°C.
'Bentlay's Electrofusion Saddle'. Black coloured, injection moulded HDPE electrofusion fitting. For use with water up to 23°C.
'Rainson HDPE (PE100)'. Black coloured, injection moulded HDPE (PE100) material. For use with water up to 23°C.
‘FLEXCORE® hose inliner’. Single layered, white coloured (translucent), extruded, corrugated polyethylene hose. For use with water up to 85°C.
'TEGA PE100 fittings'. Black coloured, injection moulded PE100 fittings. For use with water up to 60°C.
'Roxy For Metal And Plastic Products Pipe'. Black coloured (with blue external stripes), extruded HDPE pipe. For use with water up to 23°C.
'MANARCO HDPE Pipe'. Black coloured (with blue external stripe), extruded HDPE pipe. For use with water up to 85°C.
'Stars Water Tank Panel'. Multi-layered, roto-moulded LLDPE/PE foam panel comprising of a white (opaque) water contact layer, off-white (translucent) second layer, black (opaque) third layer and white (opaque) outer layer. For use with water up to 65°C.
'DERINSU PE100 Fitting'. Black coloured, injection moulded PE100 fitting. For use with water up to 60°C.
'UNIDELTA Electrofusion Fitting'. Black coloured, injection moulded PE100 Electrofusion Fitting. For use with water up to 60°C.
'Cosmoplast Butt Fusion Fitting'. Black coloured, polyethylene butt-fusion fitting. For use with water up to 60°C.
'Sesta Multi-layered Pipe'. Extruded PEX-AL-PEX pipe comprising of a natural (white, translucent) PEX inner layer, aluminium middle layer and white coloured outer layer. For use with water up to 85°C.
'SLA Barrier Pipe' (formerly known as ‘Egeplast SLA Pipe’). Extruded, triple layered pipe consisting of an black coloured PE 100 inner layer, aluminium middle layer and blue coloured (with brown coloured longitudinal stripe) PE 100 outer later. For use with water up to 23°C.
'Solerad PEX-Al-PEX Pipe'. Extruded PEX-Al-PEX pipe comprising of a natural (appears off-white) inner, aluminium middle layer and white coloured outer layer. For use with water up to 85°C.
'Q-Therm'. White coloured, extruded PEX pipes. For use with water up to 85°C.
'Hakathen Pipe'. Multi-layered, extruded pipe comprising of a natural (off-white coloured) polyethylene inner layer, aluminium middle layer and white coloured, polyethylene outer layer. For use with water up to 85°C.
‘Palaplast Hydropal W PE80 & PE100 pipes’. Extruded, PE80 & PE100 pipes, both available in either blue colour or black colour (with blue stripe). All pipes are for use with water up to 23°C.
‘Polypipe Black PE100 & Blue PE100 Pipes’. Black or blue coloured, extruded PE100 pipes. For use with water up to 23°C.
'Aquaflex PE-80'. Blue coloured, extruded HDPE pipe. For use with water up to 23°C.
'NADIR PLUS HDPE Pipe'. Blue coloured, extruded HDPE pipe. For use with water up to 40°C.
'NADIR PLUS HDPE Pipe'. Black coloured (with blue external stripe), extruded HDPE pipe. For use with water up to 40°C.
'Akansu Plastik HDPE Pipe'. Extruded HDPE pipes available in blue or black colours. For use with water up to 65°C.
'MISSOURI BLU & MISSOURI NATURAL'. Extruded, blue coloured and natural (appears off-white, translucent) PEX hoses. For use with water up to 85°C.
'Sunplast PEX-Al-PEX Pipe'. Extruded PEX-Al-PEX pipe comprising of a natural (appears off-white) inner, aluminium middle layer and white coloured outer layer. For use with water up to 85°C.
'FRIALEN Safety Fittings'. Black coloured, PE100 fittings which are injection moulded or machined from an extruded pipe. Blue coloured PE100 fittings which are injection moulded. For use with water up to 23°C.
'AUMIX PEX-Al-PEX Pipe'. Extruded PEX-Al-PEX pipe comprising of a natural (appears off-white) inner, aluminium middle layer and white coloured outer layer. For use with water up to 85°C.
'3-layers Stars Water Tank Panel'. Three-layered, roto-moulded LLDPE foam panel comprising of a white (opaque) water contact layer, black (opaque) middle layer and white (opaque) outer layer. For use with water up to 65°C.
'AQUA Cable®'. Extruded, blue coloured cable with polyethylene sheath (water contact layer), available with between 1 and 5 metallic cores and a wall thickness of between 1.2mm & 5.9mm. For use with water up to 23°C.
'JRG Sanipex MT ECO Pipe'. Multi-layered, extruded pipe comprising of a natural (off-white coloured) polyethylene inner layer, aluminium middle layer and white coloured, polyethylene outer layer. For use with water up to 85°C.
`Polyguard Blue PE80 Barrier Pipe`. Triple layered, extruded barrier pipe consisting of a blue coloured polyethylene inner layer, aluminium middle layer and blue coloured polyethylene outer layer (with red or brown coloured stripes). For use with water up to 23°C.
'Hepworth HDPE PE 100 Pipe (black) & HDPE PE 100 Pipe (black with blue stripes)'. Extruded polyethylene pipes. For use with water up to 60°C.
'Hewing PE-RT/AL/PE-RT Pipe'. Extruded, multi-layered pipes comprising of a translucent PE-RT inner layer, aluminium barrier layer and white coloured PE-RT outer layer. For use with water up to 85°C.
'Almona PE100 Pipe'. Black coloured (with blue stripe), extruded HDPE pipe. For use with water up to 85°C.
'Deltaqua PE Pipe'. Black coloured (with blue stripe), extruded polyethylene pipe. For use with water up to 85°C.
'Fusamatic Electrofusion Fittings'. Black coloured, injection moulded, polyethylene Electrofusion Fittings (made in UK from Ineos Eltex TUB121 & Hostalen CRP 100 Resist CR Black). In December 2023, Electrofusion Fittings made in Anhui Province China from Borouge Borsafe HE3490-LS & Hostalen CRP 100 Resist CR black were added to the approval. For use with water up to 60°C.
'Fusamatic Electrofusion and Spigot Fittings'. Black coloured, injection moulded, polyethylene Electrofusion and Spigot Fittings (made from Ineos Eltex TUB121, Hostalen CRP 100 Resist CR Black & Borouge Borsafe HE3490-LS). For use with water up to 60°C.
'Fusamatic Electrofusion and Spigot Fittings'. Black coloured, injection moulded, polyethylene Electrofusion and Spigot Fittings (made from Ineos Eltex TUB121, Hostalen CRP 100 Resist CR Black & Borouge Borsafe HE3490-LS). For use with water up to 60°C.
‘HELUPOWER® AQUATIC-750-BLUE’. Extruded, blue coloured cable with polyethylene sheath (water contact layer), available with between 1 and 5 metallic cores and a wall thickness of between 1.2mm & 5.9mm. For use with water up to 23°C.
'Sunplast HDPE Fittings'. Black coloured, injection moulded HDPE fittings. For use with water up to 23°C.
‘AL ZAMIL roto moulded tank panel’. White coloured, roto-moulded, multi-layered PE tank panel. For use with water up to 60°C.
‘AL ZAMIL blow moulded tank panel’. Pale blue coloured, blow-moulded, multi-layered PE tank panel. For use with water up to 60°C.
'KAN-therm ultraPRESS PERTAL'. White coloured, extruded PE-RT/Al/PE-RT pipe. For use with water up to 65°C.
'Danco Aquaflex PE100 Pipe'. Black coloured, extruded PE100 pipe. For use with water up to 23°C.
'Theoheat PERT-AL-PERT Pipe'. Extruded, multi-layered pipe comprising of a natural (appears white coloured/translucent) inner layer, aluminium barrier layer and white coloured outer layer. For use with water up to 85°C.
'METALPERT'. Extruded PE-RT/Al/PE-HD barrier pipe comprising of a white coloured PE-RT inner layer, aluminium middle layer and white coloured PE-HD outer layer. For use with water up to 85°C.
'Elysee Wise PE100 Pipe'. Black coloured (with blue, external stripe), extruded HDPE pipe. For use with water up to 23°C.
'Kimplas Trustlene PE100 Electro-fusion fittings'. Black coloured, injection moulded Electro-fusion fittings. For use with water up to 65°C.
'Smart Joint Fitting'. Blue coloured, injection moulded HDPE fittings. For use with water up to 60°C.
'Smart Joint Fitting'. Black coloured, injection moulded HDPE fitting. For use with water up to 60°C.
'Smart Joint Pipe'. Blue coloured, extruded HDPE pipe. For use with water up to 60°C.
'Smart Joint Pipe'. Black coloured (with blue stripes), extruded HDPE pipe. For use with water up to 60°C.
'iFIT Pipe'. Multi-layered, extruded pipe comprising of a natural (off-white coloured) polyethylene inner layer, aluminium middle layer and white coloured, polyethylene outer layer. For use with water up to 85°C.
'GS100ElPLAST'. Black coloured, extruded high density polyethylene pipe. For use with water up to 23°C.
'GS100ELPLAST'. Blue coloured, extruded high density polyethylene pipe. For use with water up to 23°C.
'Ashirvad electrofusion fitting'. Black coloured, injection moulded, polyethylene electrofusion fitting. For use with water up to 23°C.
'ecoFIT PE 100 Pipe'. Black coloured, extruded PE pipe. For use with water up to 23°C.
'Comisa EVO Pipe'. Extruded PE-RT/Al/PE-HD barrier pipe comprising of a white coloured PE-RT inner layer, aluminium middle layer and white coloured PE-HD outer layer. For use with water up to 85°C.
'Simona PE100 black fittings'. Black coloured, injection moulded HDPE fittings. For use with water up to 60°C.
'ELYSEE HDPE PE 100' & 'ELYSEE HDPE PE 80' pipes. Black coloured (with blue lines), extruded PE 100 & PE 80 Pipes. For use with water up to 23°C.
'RBM PE40 potable water pipe'. Black coloured (with blue external stripes), extruded LDPE pipe. For use with water up to 23°C.
'Balpex'. Extruded PEX-Al-PEX pipe comprising of an off-white coloured inner layer, aluminium middle layer and white coloured (opaque) outer layer. For use with water up to 85°C.
'Supreme PE Pipe TSIL G'. Black coloured (with blue stripes), extruded PE 100 pipe. For use with water up to 60°C.
'Kalde PE-X'. Off-white coloured, extruded PE-X pipe. For use with water up to 65°C.
'Power Plastic HDPE Pipe'. Black coloured, extruded HDPE pipe (manufactured from SABIC P6006). For use with water up to 85°C.
'AGRULINE PE100RC Pipe'. Black coloured, extruded polyethylene pipe. For use with water up to 85°C.
'Jain MDPE (PE 80) Pipe'. Blue coloured, extruded PE80 pipe. For use with water up to 65°C.
'EGPI MDPE BL-W Pipe'. Black coloured (with blue stripes), extruded MDPE pipe. For use with water up to 85°C.
'DFC White HDPE Float 025RBX006HP'. White coloured, extruded and machined HDPE float component. For use with water up to 65°C.
'ProWarm PERTAL'. White coloured, extruded PE-RT/Al/PE-RT pipe. For use with water up to 65°C.
'Aquaflex'. Red coloured, extruded PEX-b pipe. For use with water up to 23°C.
'LK PE-Xa pipe'. The pipes are either single layered or multi-layered (3 or 4 layers). The single layered, extruded pipes are natural (off-white coloured) PE-Xa. The multi-layered, extruded and IR cross-linked pipes have a natural (off-white coloured) PE-Xa inner layer, an adhesive layer, an oxygen barrier layer based on EVOH and then an optional 4th, adhesive layer. All are for use with water up to 85°C.
'BWRB1620200'. Triple layered, extruded pipe consisting of an off-white coloured PERT inner layer, aluminium middle layer and white coloured PERT outer layer. For use with water up to 85°C.
'PARIXIT HDPE PIPE'. Black coloured (with blue coloured stripes), extruded HDPE pipe. For use with water up to 65°C.
‘Drinkflex Aquarius 3G1, 3G1,5, 3G2,5, 3G4, 4G1, 4G1,5, 4G2,5, 4G4 & 4G6’ range of polyolefine cables. The cables have an extruded, blue coloured polyolefine outer (water contact) layer and are available with 3 or 4 internal cores. For use with water up to 23°C.
'Pexgol Pipe'. White coloured (transcluent), extruded HDPE pipe. For use with water up to 70°C.
'Binh Minh Plastic's HDPE pipe'. Black coloured (with blue stripe), extruded HDPE pipe. For use with water up to 40°C.
'Unidelta Uniterm PEX Pipe'. Off-white coloured (opaque), extruded PEX pipe. For use with water up to 85°C.
'Cosmoplast HDPE Pressure Pipe'. Black coloured, extruded PE100 pipe. For use with water up to 65°C.
Page of 1
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
