Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2006800

Size:

Stainless steel braided EPDM lined flexible hose assemblies with EPDM washer and ½” captive nut end connections

Marking:

PPI on rear of body

Installation Requirements:

R001 R006 R010

Expiry date:

30/06/2025

Model:

M33247A & M33247B

Approval Holder:

PPI Xiamen Industry Co Ltd

Company Name

PPI Xiamen Industry Co Ltd

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

Country

China

View All Listings by this Company

Manufacturer:

PPI Xiamen Industry Co Ltd

Company Name

PPI Xiamen Industry Co Ltd

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

Country

China

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a ceramic disc headwork with dome type operating member. The spout outlets incorporate a plastic aerator. Model 33500665 is supplied with a pop-up waste. Maximum working pressure 10.0 bar Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2004019

Size:

Stainless steel braided PE-X lined flexible hose assemblies incorporating ⅜" captive nut end connections.

Marking:

Dornbracht on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2025

Model:

33500665, 33505665, 33510665, 33525665 & 33534665

Approval Holder:

Dornbracht AG & Co. KG

Company Name

Dornbracht AG & Co. KG

Address

Kobbingser Muhle 6 Iserlohn

Postcode

D-58640

Country

Germany

General Email

wpape@dornbracht.com

View All Listings by this Company

Manufacturer:

Dornbracht AG & Co. KG

Company Name

Dornbracht AG & Co. KG

Address

Kobbingser Muhle 6 Iserlohn

Postcode

D-58640

Country

Germany

General Email

wpape@dornbracht.com

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating non-rising spindle headworks with dome type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2004046

Size:

15mm copper inlet tails.

Marking:

Blanco on rear of body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2025

Model:

BM5006 - Blanco Caro

Approval Holder:

Blanco Limited

Company Name

Blanco Limited

Address

1 Victor Way, Colney Street, St Albans

Postcode

AL2 2FL

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass or brushed steel finish) incorporating ¼ turn ceramic disc headworks with single lever or cube type operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2004318

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

1810 logo on body

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2025

Model:

CUR/01/CH, CUR/02/BS, PEN/01/CH, PEN/02/BS, RUS/01/CH, RUS/02/BS, VER/01/CH & VER/02/BS.

Approval Holder:

The 1810 Company limited

Company Name

The 1810 Company limited

Address

Unit 14-16, Bromfield Industrial Estate, Queens Lane Mold

Postcode

CH7 1JR

Phone

0044 7772144600

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headworks with single lever operating member. The spout outlet incorporates a plastic aerator. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2004326

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

SMR Logo on rear of operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2025

Model:

HILTON

Approval Holder:

SAN MARCO RUBINETTERIA S.r.l.

Company Name

SAN MARCO RUBINETTERIA S.r.l.

Address

Via Carducci 10 13867 Pray (BI)

Country

Italy

View All Listings by this Company

Manufacturer:

SAN MARCO RUBINETTERIA S.r.l.

Company Name

SAN MARCO RUBINETTERIA S.r.l.

Address

Via Carducci 10 13867 Pray (BI)

Country

Italy

View All Listings by this Company