TEST SITE

Combination Tap Assemblies

Section Code 0530 : Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

Back To Directory Sections

#2306317

Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headwork with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge incorporating a dome type operating member and a manual override button. Each inlet incorporates a combined NBR washer and stainless steel strainer, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a self cancelling diverter to shower outlet and a plastic flow straightener. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2306317
Size:
¾” captive nut.
Marking:
Xindong logo on body.
Installation Requirements:
R001 R020
Expiry date:
30/06/2028
Model:
T41011, T41051, T41071.

Approval Holder:
Zhejiang Xindong Sanitary Ware Co.,Ltd.
Company Name
Zhejiang Xindong Sanitary Ware Co.,Ltd.
Address
Xuanmen Industrial Zone Yuhuan, Zhejiang
Country
China

View All Listings by this Company
Manufacturer:
Zhejiang Xindong Sanitary Ware Co.,Ltd.
Company Name
Zhejiang Xindong Sanitary Ware Co.,Ltd.
Address
Xuanmen Industrial Zone Yuhuan, Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#2307008

Wall mounted two-hole, single outlet (fixed) combination tap assembly (brass bodies - various finishes) incorporating a ceramic cartridge headwork with a single lever operating member, and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2307008
Size:
½” BSP (M)
Marking:
Axor on Body
Installation Requirements:
R001 R030
Expiry date:
31/07/2028
Model:
39 400 xx0 Where xx0 denotes the surface finish (/which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company

Print This Approval


#2307308

Range of wall mounted, two-hole, single outlet (fixed) combination tap assembly (chrome plated brass body) incorporating a ceramic cartridge headwork with a single lever operating member and self-cancelling diverter to shower outlet. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2307308
Size:
¾” BSP(M) x ½” BSP (M) Offset unions.
Marking:
Grohe on body.
Installation Requirements:
R001 R010 R030
Expiry date:
31/07/2028
Model:
33553003, 33553AL3 & 33553DC3.

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Country
Germany
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg, 58675 Hemer
Country
Germany
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2307039

Deck mounted, two hole, single outlet fixed combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator and the products are supplied with metal backnuts, shower hose and handset. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow prevention. Maximum Working Pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2307039
Size:
¾” BSP (M).
Marking:
Hansgrohe on body.
Installation Requirements:
R001 R005 R030
Expiry date:
31/07/2028
Model:
71461 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company

Print This Approval


#2307041

Two hole, wall mounted, single outlet fixed combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headworks with a single lever operating member and self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. Maximum Working Pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2307041
Size:
½” x ¾” BSP (M) Offset unions.
Marking:
Hansgrohe On Operating member
Installation Requirements:
R001 R030
Expiry date:
31/07/2028
Model:
71440 xxx, 71450 xxx 71547 xxx 71657 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company

Print This Approval


#2307352

Range of two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic disk headworks with single lever operating members and self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2307352
Size:
¾”BSP (M).
Marking:
Xindong logo on body.
Installation Requirements:
R001 R006 R030
Expiry date:
31/07/2028
Model:
T8801 - 4 SC FS.

Approval Holder:
Zhejiang Xindong Sanitary Ware Co.,Ltd
Company Name
Zhejiang Xindong Sanitary Ware Co.,Ltd
Address
Xuanmen Industrial Zone Yuhuan, Zhejiang
Country
China

View All Listings by this Company
Manufacturer:
Zhejiang Xindong Sanitary Ware Co.,Ltd
Company Name
Zhejiang Xindong Sanitary Ware Co.,Ltd
Address
Xuanmen Industrial Zone Yuhuan, Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#2305059

Range of two-hole, single outlet, fixed combination tap assembles (chrome plated brass bodies). Incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to a shower outlet. The spout outlets incorporate plastic aerators or flow straightener and supplied with metal backnuts. The products are supplied with a shower hose and handset. Maximum working pressure 10 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2305059
Size:
¾” BSP (M)
Marking:
R2 (brand of Roper Rhodes) on leg.
Installation Requirements:
R001 R006 R030
Expiry date:
31/05/2028
Model:
TR1024 TR1028

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Phone
+44 (0)1225 303 900 Fax: 01225 448877
General Email
info@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2307040

Deck mounted, two hole, single outlet fixed combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator and the products are supplied with metal backnuts, shower hose and handset. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow prevention. Maximum Working Pressure 10.0 bar. Maximum operating temperature 60°C

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2307040
Size:
¾” BSP (M).
Marking:
Hansgrohe On Body.
Installation Requirements:
R001 R006 R030
Expiry date:
31/07/2028
Model:
71462 xxx.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company

Print This Approval


#2306341

Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headwork with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge incorporating a dome type operating member and a manual override button. Each inlet incorporates a combined NBR washer and stainless steel strainer, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a self cancelling diverter to shower outlet and a plastic flow straightener. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2306341
Size:
¾” captive nut.
Marking:
Eastbrook on body.
Installation Requirements:
R001 R020
Expiry date:
30/06/2028
Model:
93.0038

Approval Holder:
Eastbrook Co
Company Name
Eastbrook Co
Postcode
GL3 3DB

View All Listings by this Company

Print This Approval


#2310011

A wall mounted two-hole, single outlet, fixed combination tap assembles (brass body – various finishes). Incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to a shower outlet. The temperature is controlled independently via a thermostatic cartridge. Both operating members incorporate a manual override button. The inlets incorporate stainless-steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout incorporates a plastic aerator. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2310011
Size:
1/2" BSP (M).
Marking:
Hansgrohe on body.
Installation Requirements:
R001 R030
Expiry date:
31/10/2028
Model:
13 141 xx0 - Hansgrohe Ecostat Select. Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 9 of 10

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.