Water Regulations Approval Scheme Ltd

Combination Tap Assemblies

Section Code 0450 : Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Back To Directory Sections

WRAS Approval Number: #2310391

Range of single hole, single outlet, fixed combination tap assembly, (chrome plated brass bodies) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate aerators and plastic flow straighteners. The products are supplied with a click type pop-up waste. Maximum working pressure 16 bar. Maximum operating temperature 60°C

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2310391
Size:: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:: Instinct (Brand of PHG) on operating member.
Installation Requirements:: R001 R006 R010
Expiry date:: 31/10/2028
Model:: 4E1001 - DELLA MINI MONO BASIN 4E1002 - DELLA MONO BASIN

Approval Holder:: PHG (Plumbing Heating Group)

Company Name
PHG (Plumbing Heating Group)
Address
Europa Way, Lichfield, Staffs.
Postcode
WS14 9TZ

View All Listings by this Company

WRAS Approval Number: #2301913

Range of single hole, single outlet fixed combination tap assemblies (brass bodies, various finishes – see models) quarter turn ceramic disc headworks with cross-top operating members. The spout outlets incorporate plastic aerators. Maximum operating pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2301913
Size:: Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.
Marking:: Bristan on body.
Installation Requirements:: R001 R006 R010
Expiry date:: 31/01/2028
Model:: CRU BAS C CRU BAS BLK CRU BAS BB

Approval Holder:: Bristan Group Limited

Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

WRAS Approval Number: #2307043

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with or without a pop-up waste (see model), Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2307043
Size:: 71 443 xxx model: Stainless steel braided thermoplastic silicone rubber (TPSiV) lined flexible hose assemblies incorporating ⅜” captive nut end connections. All other models: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:: Hansgrohe on operating member
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 31/07/2028
Model:: 71 581 xxx Vernis Blend Single lever basin mixer 190 with metal pop-up waste set, 71 582 xxx Vernis Blend Single lever basin mixer 190 without waste set, 71 562 xxx Vernis Shape Single lever basin mixer 190 with pop-up waste set, 71 590 xxx Vernis Shape Single lever basin mixer 190 with metal pop-up waste set, 71 591 xxx Vernis Shape Single lever basin mixer 190 without waste set, 71 552 xxx Vernis Blend Single lever basin mixer 190 with pop-up waste set, 71 443 xxx Vernis Blend Single lever bath mixer Monotrou. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company
Manufacturer:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company

WRAS Approval Number: #250108301

Section:: 0450 Combination Tap Assemblies
Description:: A Range of Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
Deck Mounted Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections. Supplied with click type waste, Not Tested Tap Gap AUK3 when installed in line with the IRN's
Basis of Compliance:: Tested to a standard assessed as an appropriate British Standard by WRAS
Installation Requirements:: R001 R005 R010
Expiry date:: 31/01/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
TAPP 1234 C	chrome	1/2" BSP	5 bar	60 °C	Genn Tapps	Operating Member	Yes	1/2 Turn ceramic disk	C-plate	Aerator	Flow Regulator Fitted,
TAPP 1234 BLK	Black	1/2" BSP	5 bar	60 °C	Genn Tapps	Operating Member	Yes	1/2 Turn ceramic disk	C-plate	Aerator	Flow Regulator Fitted,

Product Images

Approval Holder:: WRAS

Company Name
WRAS
Address
General Email
jason.furnival@wras.co.uk

View All Listings by this Company
Manufacturer:: Genn Tapps Ltd.

Company Name
Genn Tapps Ltd.
Address
123 Mainn Road
Postcode
W22 4BB
Country
United Kingdom
General Email
j-doe@gtapp.com

View All Listings by this Company

WRAS Approval Number: #250108303

Section:: 0450 Combination Tap Assemblies
Description:: A Range of Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
Deck Mounted Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections. Supplied with click type waste, Not Tested Tap Gap AUK3 when installed in line with the IRN's
Basis of Compliance:: Tested to a standard assessed as an appropriate British Standard by WRAS
Installation Requirements:: R001 R005 R010
Expiry date:: 31/01/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
TAPP 1234 C	chrome	1/2" BSP	5 bar	60 °C	Genn Tapps	Operating Member	Yes	1/2 Turn ceramic disk	C-plate	Aerator	Flow Regulator Fitted,
TAPP 1234 BLK	Black	1/2" BSP	5 bar	60 °C	Genn Tapps	Operating Member	Yes	1/2 Turn ceramic disk	C-plate	Aerator	Flow Regulator Fitted,

Approval Holder:: Genn Tapps Ltd.

Company Name
Genn Tapps Ltd.
Address
123 Mainn Road
Postcode
W22 4BB
Country
United Kingdom
General Email
j-doe@gtapp.com

View All Listings by this Company
Manufacturer:: Genn Tapps Ltd.

Company Name
Genn Tapps Ltd.
Address
123 Mainn Road
Postcode
W22 4BB
Country
United Kingdom
General Email
j-doe@gtapp.com

View All Listings by this Company