Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Some products are supplied with a lever type or click-type pop up waste. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2312017

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” BSP (F) captive nut end connections.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/12/2028

Model:

31 513 xxx (without waste) 31 517 xxx (without waste) 31 915 xxx (without waste) 31 917 xxx (without waste) 31 574 xxx (click type waste) 31 518 xxx (without waste) 31 603 xxx (lever type waste) 31 607 xxx (lever type waste) 31 608 xxx (lever type waste) 31 621 xxx (lever type waste) 31 911 xxx (lever type waste) 31 578 xxx (click type waste) Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as example: 000 = chrome optic finish, PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Single hole, single outlet (with additional outlets for filtered cold water), fixed, combination tap assembly (various plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The tap body incorporates an additional push type headwork that controls the flow to a second outlet. Both outlets incorporate plastic aerators. The product is supplied with a filter assembly supplied via a brass connecting tee. Models incorporate approved single check valve cartridges; however, the complete assembly has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2312025

Size:

Stainless steel braided PEX lined hose with 3/8" BSP captive nut (tap connection) and Stainless steel braided TPSiV lined hose with 3/8" BSP captive nut (filter connection).

Marking:

Hansgrohe on tap body.

Installation Requirements:

R001 R006 R009 R150 R170

Expiry date:

31/12/2028

Model:

Aqittura M91 - 76 802 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Range of single-hole, single outlet, fixed, combination tap assemblies (brass bodies – various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. The products are supplied with click-type pop up wastes. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2312911

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 15mm compression end connections.

Marking:

BRISTAN on the body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/12/2028

Model:

HOU ES BAS C HOU ES BAS BB HOU ES BAS BLK

Approval Holder:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (brass bodies – various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a lever operated pop up waste. Maximum working pressure 5 bar. Maximum operating temperature 70 °C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2312353

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

St James, H & C printed on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/12/2028

Model:

SJ415XXYY and YYYY - MONOBLOC BASIN MIXER. xx denotes the finish option – CP = Chrome, NI = Bright Nickel, BN = Brushed NickeL, AG – Antique Gold, PB – Polished Brass – UC – Unlacquered Copper, UV – Unclacquered brass yy and yyyy denotes the Handle Options –LM = London Handle Metal Indice, LL = London Lever, LLBK = London Lever Black , CL – Crystal Lever, CLBK – Crystal Lever Black.

Approval Holder:

Marflow Engineering Ltd

Company Name

Marflow Engineering Ltd

Address

Britannia House Austin Way Hamstead Industrial Estate

Postcode

B42 1DU

Country

Birmingham

View All Listings by this Company

Range of pillar taps, (chrome plated, brass bodies), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate plastic flow straighteners. The products are supplied with metal back nuts. Maximum operating pressure 6 bar. Maximum operating temperature 85°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2309375

Size:

½” BSP

Marking:

Instinct (Brand of PHG) on operating member.

Installation Requirements:

R001 R005

Expiry date:

30/09/2028

Model:

4E1003 - DELLA BASIN TAP PAIR 4E1004 - DELLA BATH TAP PAIR

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company