Range of single hole, single outlet fixed combination tap assemblies (brass body - various finishes), incorporating a ceramic cartridge headwork with either a single lever or cross top operating member. The spout outlets incorporate a plastic aerator. Products are supplied with PEX inner-lined grey plastic braided inlet hoses. Maximum working pressure 10 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2212352

Size:

½” BSP captive nut.

Marking:

Bagnodesign on tap body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/12/2027

Model:

BDM-CLI-401S-CP (Chrome Plated), BDM-CLI-401S-NB (Brushed Nickel), C-LINE SINGLE, BDM-MLP-301S-CP (Chrome Plated), BDM-MLP-301S-MG (Matt Grey), BDM-MLP-301S-NB (Brushed Nickel), BDM-MLP-301S-MB (Matt Black) M-LINE PROJECT Model added January 2024 PROJECT MONO BASIN MIXER BDM-PRO-111183-A-XX XX’ denotes finish and is replaced with: Chrome Brushed Nickel Matt Black Anthracite Lacquered Zanzibar Gold PVD Gold Soft Bronze Santiago Oyster Burgundy

Approval Holder:

BAGNODESIGN

Company Name

BAGNODESIGN

Address

UNIT 1 OAKWELL PARK TRADING ESTATE BIRSTALL

Postcode

WF17 9LU

View All Listings by this Company

Range of floor mounted, single hole, single outlet fixed combination taps assemblies (brass bodies - various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304019

Size:

½” BSP (F)

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R010 R040

Expiry date:

30/04/2028

Model:

32 530 xxx 74 530 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and or letters, as examples: 000 = chrome optic finish, 800 = PVD steel optic finish

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Range of single-hole, single outlet (fixed) combination taps assemblies with (brass bodies - various finishes), incorporating ceramic cartridge headworks with joystick operating members. The spout outlets incorporate plastic aerators. Models are supplied with lever operated pop-up waste (excluding 31 018 xxx). Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304042

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” BSP captive nut end connections.

Marking:

AXOR on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2028

Model:

39 010 xxx 39 015 xxx 39 018 xxx 39 020 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with (brass bodies - various finishes), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. All models are supplied with a pop-up waste. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304320

Size:

Stainless steel braided PEX lined flexible hose assemblies with 3/8” BSP captive nut end connections.

Marking:

Grohe on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2028

Model:

Essence range: 24 171 001 – Chrome 24 171 A01 – Hard graphite 24 171 AL1 – Brushed hard graphite 24 171 BE1 – Polished nickel 24 171 DA1 – Warm sunset 24 171 DC1 – Supersteel 24 171 DL1 – Brushed warm sunset 24 171 EN1 – Brushed nickel 24 171 GL1 – Cool sunrise 24 171 GN1 – Brushed cool sunrise 24 172 001 – Chrome 24 172 A01 – Hard graphite 24 172 AL1 – Brushed hard graphite 24 172 BE1 – Polished nickel 24 172 DA1 – Warm sunset 24 172 DC1 – Supersteel 24 172 DL1 – Brushed warm sunset 24 172 EN1 – Brushed nickel 24 172 GL1 – Cool sunrise 24 172 GN1 – Brushed cool sunrise

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg, 58675 Hemer

Country

Germany

Phone

02372 930

General Email

info@grohe.com

View All Listings by this Company

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg, 58675 Hemer

Country

Germany

Phone

02372 930

General Email

info@grohe.com

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating ceramic cartridge headwork and a single lever operating member. The spout outlet incorporates a plastic aerator and the product is supplied with a lever operated pop-up waste. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2304321

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.

Marking:

Grohe on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2028

Model:

Essence range: 24 171 001 – Chrome 24 171 A01 – Hard graphite 24 171 AL1 – Brushed hard graphite 24 171 BE1 – Polished nickel 24 171 DA1 – Warm sunset 24 171 DC1 – Supersteel 24 171 DL1 – Brushed warm sunset 24 171 EN1 – Brushed nickel 24 171 GL1 – Cool sunrise 24 171 GN1 – Brushed cool sunrise 24 172 001 – Chrome 24 172 A01 – Hard graphite 24 172 AL1 – Brushed hard graphite 24 172 BE1 – Polished nickel 24 172 DA1 – Warm sunset 24 172 DC1 – Supersteel 24 172 DL1 – Brushed warm sunset 24 172 EN1 – Brushed nickel 24 172 GL1 – Cool sunrise 24 172 GN1 – Brushed cool sunrise

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg, 58675 Hemer

Country

Germany

Phone

02372 930

General Email

info@grohe.com

View All Listings by this Company

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg, 58675 Hemer

Country

Germany

Phone

02372 930

General Email

info@grohe.com

View All Listings by this Company