Water Regulations Approval Scheme Ltd

Combination Tap Assemblies

Section Code 0450 : Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Back To Directory Sections

WRAS Approval Number: #2303038

Range of single hole, single outlet (fixed) combination tap assemblies (brass body, various finishes) , incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. The products are supplied with a lever type pop-up waste. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2303038
Size:: Stainless steel braided, PEX lined flexible hose assemblies incorporating 3/8” BSP (M) end connections.
Marking:: AXOR on Body
Installation Requirements:: R001 R006 R010 R009 R583
Expiry date:: 31/03/2028
Model:: 10 010 xxx 10 018 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company
Manufacturer:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company

WRAS Approval Number: #2303034

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes). Incorporating ceramic cartridge headworks, and single lever operating members. The spout outlet incorporates a plastic aerator. Supplied with an open waste outlet. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2303034
Size:: Stainless steel braided thermoplastic silicone rubber (TPSiV) lined flexible hoses with 3/8" captive nut end connections.
Marking:: Axor on body
Installation Requirements:: R001 R006 R010 R009 R583
Expiry date:: 31/03/2028
Model:: 10 123 xxx 10 129 xxx xxx denotes the surface finish (which is a non-water contact part). examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company

WRAS Approval Number: #2303804

Single hole, single outlet (fixed) combination tap assembly (chrome plated brass), incorporating ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates either a plastic aerator or flow straightener. The products are supplied with a click type pop-up waste. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2303804
Size:: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:: Aqualisa On operating member
Installation Requirements:: R001 R010 R006
Expiry date:: 31/03/2028
Model:: CT.LPT.CH Aqualisa Central Chrome Pillar Tap

Product Images

Approval Holder:: Aqualisa Products Ltd.

Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
01959 560 000
General Email
marketing@aqualisa.com

View All Listings by this Company

WRAS Approval Number: #2303805

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass), incorporating ceramic cartridge headworks or ceramic disk headworks (model A05021) with single lever operating members. The spout outlet incorporates either a plastic aerator or flow straightener, (Model A05022 is only supplied with an aerator) . The products are supplied with a click type pop-up waste. A05021 and A05494 maximum working pressure 10.0 bar. A05022, A05025 and A05495 maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2303805
Size:: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:: Nabis (Brand of Wolseley) on operating member except for model A05021 has Nabis Bathroom Barford on Indice.
Installation Requirements:: R001 R010 R006
Expiry date:: 31/03/2028
Model:: A05021 *Barford lever basin mixer A05022 *Ossia Basin mixer, chrome A05025 *Corda basin mixer A05494 *Galene lever cloakroom basin mixer A05495*Galene lever basin mixer

Approval Holder:: Wolseley UK

Company Name
Wolseley UK
Address
K2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926 705792

View All Listings by this Company

WRAS Approval Number: #2210375

Single hole, single outlet (fixed) combination tap assemblies (brass body- various finishes) incorporating a ceramic cartridge headwork with various operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2210375
Size:: Stainless steel braided, PEX lined flexible hose assembly incorporating ½” BSP (F) captive nut.
Marking:: AQUAECO ON TAP BODY
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 31/10/2027
Model:: AQM-CND-302S-CP (Chrome Plated) CONRAD MONO TALL SMOOTH BODIED BASIN MIXER AQM-CND-302S-MB (Matt Black) CONRAD MONO TALL SMOOTH BODIED BASIN MIXER

Approval Holder:: Aquazone (UK) Ltd.

Company Name
Aquazone (UK) Ltd.
Address
Unit 1 Oakwell Park Trading Estate, Birstall, Leeds
Postcode
WF17 9LU

View All Listings by this Company