Water Regulations Approval Scheme Ltd

Combination Tap Assemblies

Section Code 0470 : Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Back To Directory Sections

WRAS Approval Number: #2304328

Range of single hole, single outlet (swivel) combination tap assemblies, (chrome plated brass bodies), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2304328
Size:: Stainless steel braided EPDM lined flexible hoses with ½”BSP (M) end connection.
Marking:: SMR on operating member.
Installation Requirements:: R001 R006 R010
Expiry date:: 30/04/2028
Model:: ALTHIA SINGLE LEVER SWAN, ALTHIA SINGLE LEVER QUAD, GLOBE SINGLE LEVER.

Approval Holder:: Norcros Group (Holdings) Limited T/A Abode

Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road
Postcode
S75 1HT
Country
Barnsley
Phone
01226 283434
General Email
pillingworth@abodedesigns.co.uk

View All Listings by this Company
Manufacturer:: SAN MARCO RUBINETTERIA S.r.l.

Company Name
SAN MARCO RUBINETTERIA S.r.l.
Address
Via Carducci 10 13867 Pray (BI)
Country
Italy
General Email

View All Listings by this Company

WRAS Approval Number: #2304903

Range of wall mounted, concealed, three-hole, single outlet (fixed) combination tap assemblies (chrome plated brass bodies) incorporating quarter turn ceramic disc headworks with single lever operating members. Maximum working pressure 10.0 bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2304903
Size:: 22mm Compression
Marking:: Bristan on spout
Installation Requirements:: R001 R010 R040
Expiry date:: 30/04/2028
Model:: DSC WMBF C & 225909

Approval Holder:: Bristan Group Limited

Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

WRAS Approval Number: #2304910

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with under counter boiling water unit (vented via the spout outlet) and in-line water filter (on instantaneous hot water supply only). Flow is controlled by a ceramic cartridge headwork with a single lever operating member. Instantaneous hot water is controlled by a self-closing quarter turn ceramic disc headwork with a single lever operating member. The product is supplied with loose 3/8” x 15mm reducers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlets incorporate a plastic aerator. Maximum working pressure 8.6 bar. Maximum operating temperature 98°C.

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2304910
Size:: Mains hot and cold water connections: Stainless steel braided silicone lined flexible hose assemblies with ½” captive nut end connections. Size added January 2019: Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections. Water filter inlet: 10mm LLDPE tubing
Marking:: Insinkerator logo on body
Installation Requirements:: R001 R006 R009 R010 R170
Expiry date:: 30/04/2028
Proviso:: The single check valve supplied with this product must be installed to maintain the validity of the WRAS approval.
Model:: Insinkerator 3N1 Range: L-spout models: F-H3N1-C-1 (Chrome) - Product No. 44837, F-H3N1-W-1 (White) - Product No. 44837A, F-H3N1-BR-1 (brushed Nickel) - Product No. 44837B, F-H3N1-ORG-1 (Orange) - Product No. 44837AL, F-H3N1-NS-1 (Natural Stone) - Product No. 44837AM, F-H3N1-JB-1 (Jet black) - Product No. 44837AP, F-H3N1-G-1 (Gold) - Product No. 44837AS F-H3N1-AN-1 (Anthracite) - Product No. 44837AN. F-H3N1-BV-1 (Black velvet) - Product No. 44837AW. J-spout models: F-H3N1J-C-1 (Chrome) - Product No. 45097 F-H3N1J-BR-1 (Brushed Nickel) - Product No. 45097B. F-H3N1J-RG (Rose Gold) - Product No. 45097AT-ISE. F-H3N1J-BV-1 (Black Velvet) - Product No. 45097AW Tank and filter NXTF-1 - Product No. 44900 All taps to be installed with the tank and filter assembly

Approval Holder:: InSinkErator

Company Name
InSinkErator
Address
4700 21st Street, Racine, WI 53406-5093
Country
USA

View All Listings by this Company

WRAS Approval Number: #2304012

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2304012
Size:: Stainless steel braided PEX lined hose with 3/8" BSP captive nut end connections.
Marking:: GAOAO on body
Installation Requirements:: R001 R009 R010 R040
Expiry date:: 30/04/2028
Model:: Model: ZA3833(ZA3833-G) ZA3833YB(ZA3833YB-G) ZA3833CS(ZA3833CS-G) Surface: CS:Stainless steel YB:Matte Graphite TB:Titanium LT:Brushed Brass PVD LR:Brushed copper None/CP:Chrome Other codes： -G: holistic handle -S: handle of rod connected cap

Approval Holder:: Zhejiang Gaoao Sanitary Ware Co. Ltd.

Company Name
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province
Country
China

View All Listings by this Company

WRAS Approval Number: #2305008

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), with a ceramic cartridge headwork and a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2305008
Size:: Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8" BSP captive nut end connections
Marking:: AXOR on body
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 31/05/2028
Model:: 10 822 xxx Single lever kitchen mixer Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach
Country
Germany

View All Listings by this Company