Range of end feed copper fittings for use with copper tube to EN 1057. The 950513, 950514, 950501, 950503 & 950502 models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208817

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

CPS & date of manufacture MM/YY on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

237738, 237770, 950504, 950505, 950506, 950507, 950508, 950509, 953104 & 953105 Elbow 90 degree C X C: 8mm-108mm. 237740, 237769, 501657, 950510, 950511, 950512, 954699 & 954700 Street Elbow 90 degree Ftg X C: 8mm-108mm. 501643, 501764, 577336, 858891, 858892 & 858893 Street Elbow 45 degree Ftg X C: 8mm-108mm. 952608, 952609, 952610, 954695, 954696, 954697, 237739 & 237743 Elbow 45 degree C X C: 8mm-108mm. 954750 & 954751 Partial Crossover Ftg x C: 12mm-28mm. 954668, 954669 & 954670 Slip Straight Coupling C X C: 8mm-108mm. 237772, 237773, 950489, 950490, 950491, 950492, 950493, 950494, 953091, 953092 & 954675 Straight Coupling with groove C X C: 8mm-108mm. 237741, 799352, 950495, 950496, 953097, 953098, 954678, 954679, 954680, 954681, 954682, 954683, 954684, 954685, 954686, 954687, 954688, 954689, 954690, 908683, 908706 Fitting Reducer Ftg X C: 8mm-108mm. 950497, 953093, 953094, 953095, 953096, 953172 & 954691 Reducing Coupler C X C: 8mm-108mm and ½” - 1”. 237733, 237736, 950515, 950516, 950521, 950528, 950529, 953111, 953112 & 954713 Equal TEE CxCxC: 8mm-108mm. 237767,496119, 689717, 813643, 950517, 950518, 950519, 950520, 950522, 950523, 950526, 950527, 953169, 954717, 954719, 954720, 954721, 954722, 954723, 954724, 954727, 954728, 954729, 954730, 954732, 954733, 954734, 954735 & 954736 Reducing Tee CxCxC: 8mm-108mm. 237735, 237742, 945648, 950531, 952561, 953113, 953114, 954738, 954739 & 954740 Cap: 8mm-108mm. 953117 & 954749 Full Crossover C x C: 12mm-28mm. 909039 & 909054 Female Adapter C X C: 15mm x ½” NPT (F) - 54mm x 2” NPT (F). 952367 Return Bend Stop: 15mm-54mm. 909065, 909104, 950546 & 954776 Male Adapter C X C: 15mm x ½” NPT (M) - 54mm x 2” NPT (M). 954710 BENT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. 954745 & 954746 STRAIGHT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. 950513 & 950514 Bent Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut. 950501, 950503 & 950502 Straight Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut.

Approval Holder:

City Plumbing Supplies/ Plumbing Trade Supplies

Company Name

City Plumbing Supplies/ Plumbing Trade Supplies

Address

PTS HOUSE ELDON WAY CRICK

Postcode

NN6 7SL

Country

NORTHAMPTON

View All Listings by this Company

Range of copper end feed fittings for use with copper tube. For above and below ground use. Maximum working pressure 25.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101810

Size:

SEE MODEL

Marking:

PFP & size on body

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

EEF01 Coupling 30400013 15mm 30400017 22mm 30400021 28mm EEF01R Endfeed Reducing Coupling 30409317 22mm x 15mm EEF06 Fitting reducer 30412429 22mm x 15mm 30412435 28mm x 22mm EF61 Stop end 30463214 22mm EEF24 Equal tee 30451713 15mm 30451717 22mm 30451721 28mm EEF12 Elbow 30424813 15mm 30424817 22mm 30424821 28mm EEF12S Street elbow 30433109 15mm 30433112 22mm 30433115 28mm EEF21 Endfeed Obtuse Elbow 45' 30430005 22mm 30430008 28mm EEF24R Reducing tee 30453820 22mm x 22mm x 15mm 30453818 22mm x 15mm x 22mm 30453816 22mm x 15mm x 15mm EEF12X Street Elbow 90' Long tail 30433201 15mm 30433204 22mm

Approval Holder:

Primaflow F & P

Company Name

Primaflow F & P

Address

177 Walsall Rd, Perry Barr, Birmingham

Postcode

B42 1BP

Country

United Kingdom

View All Listings by this Company

Range of end feed brass fittings for use with copper tube (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211825

Size:

End feed: 15mm-54mm (see model). Threaded connections: ¼”-2” BSP (see model).

Marking:

Lawton Tubes Logo, size, EN1254 & PN on body.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

Male Straight Adaptor (EFCOMI prefix) "EFCOMI0151/2 15mm x1/2” – EFCOMI0542 54MM X 2” Female Straight Adaptor (EFCOFI prefix) EFCOFI0151/2 15mm x1/2” – EFCOFI0542 54MM X 2” Female Elbow (EFELFI prefix) EFELFI0151/2 15mm x1/2” – EFELFI0281 28mm x 1” Male Union Connector (EFUND prefix) EFUND151/2 15mm x1/2” – EFUND542 54MM X 2”, Female Tee (EFTEFI prefix) EFTEFI015151/2 15 x15mm x ½”- EFTEFI028281 28 X28MM X1”

Approval Holder:

Lawton Tube Company Limited.

Company Name

Lawton Tube Company Limited.

Address

Torrington Avenue Tile Hill Coventry

Postcode

CV4 9AB

View All Listings by this Company

Range of end feed copper fittings for use with copper tube to EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208819

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

Lawton Tubes Logo, EN1254, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

90 Degree Street Elbow (EFELS prefix) EFELS010 10mm – EFELS054 54mm 90 Degree Elbow (EFEL prefix) EFEL008 8mm – EFEL108 108mm Equal Tee (EFTE prefix) EFTE008 8mm – EFTE108 108mm Reducing Tee (EFTE prefix) EFTE0151510 15mmx10mm – EFTE108108108 108mm x108mm Straight Coupling with stop (EFCP prefix) EFCP008 8mm – EFCP108 108mm Straight Slip Coupling (EFESC prefix) EFESC015 15mm - EFESC054 54mm 45 Degree Elbow (EFEL prefix) EFEL00845 8mm – EFEL10845 108mm Reducer Coupling (EFCP prefix) EFCP0108 10mmx 8mm - EFCP108108 108mm x 108mm Reducer fitting (EFRED prefix) EFRED0108 10mmx 8mm – EFRED108108 108mm x 108mm 45 Degree Street Elbow (EFELS prefix) EFELS01545 15mm - EFELS07645 76.1mm 90 Degree Long Radius Elbow (EFELLR prefix) EFELLR015 15mm - EFELLR0108 108mm Cap (EFEC prefix) EFEC008 8mm - EFEC108 108mm Crossover (EFFCO prefix) EFFCO015 15mm - EFFCO022 22mm Part Cross over (EFPCO prefix) EFPCO015 15mm - EFPCO022 22mm Long street elbow (EFELSLT prefix) EFELSLT022 22mm - EFELSLT0108 108mm

Approval Holder:

Lawton Tube Company Limited.

Company Name

Lawton Tube Company Limited.

Address

Torrington Avenue Tile Hill Coventry

Postcode

CV4 9AB

View All Listings by this Company

Range of end feed copper fittings for use with copper tube to EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208820

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

659811 JET REDUCER 67X28mm, 659812 JET REDUCER 67X35mm, 659813 JET REDUCER 67X42mm, 659814 JET REDUCER 67X54mm, 659815 JET REDUCER 76X35mm, 659816 JET REDUCER 76X42mm, 659817 JET REDUCER 76X54mm, 659818 JET REDUCER 76X67mm, 659819 JET REDUCER 108X42mm, 659820 JET REDUCER 108X54mm, 659821 JET REDUCER 108X67mm, 659822 JET REDUCER 108X76mm 659833 JET STRAIGHT COUPLING 67mm, 659834 JET STRAIGHT COUPLING 76mm, 659835 JET STRAIGHT COUPLING 108mm, 659838 JET REDUCED TEE 67X67X28mm, 659839 JET REDUCED TEE 67X67X35mm, 659840 JET REDUCED TEE 67X67X42mm, 659841 JET REDUCED TEE 67X67X54mm, 659842 JET REDUCED TEE 76X76X28mm, 659843 JET REDUCED TEE 76X76X35mm, 659844 JET REDUCED TEE 76X76X42mm, 659845 JET REDUCED TEE 76X76X54mm, 659846 JET REDUCED TEE 108X108X35mm, 659847 JET REDUCED TEE 108X108X54mm, 659848 JET REDUCED TEE 108X108X76mm, 659853 JET EQUAL TEE 67mm, 659854 JET EQUAL TEE 76mm, 659855 JET EQUAL TEE 108mm 659858 JET STOP END 67mm, 659859 JET STOP END 76mm, 659860 JET STOP END 108mm 659863 JET 90D ELBOW 67mm, 659864 JET 90D ELBOW 76mm, 659865 JET 90D ELBOW 108mm, 659868 JET 45D ELBOW 67mm, 659869 JET 45D ELBOW 76mm, 659870 JET45D ELBOW 108mm, 659927 JET 45D STREET ELBOW 67mm, 659928 JET 45D STREET ELBOW 76mm, 659929 JET 90D LONG RADIUS BEND 67mm, 659930 JET 90D LONG RADIUS BEND 76mm, 659931 JET 90D LONG RADIUS BEND 108mm 659873 * JET BRAZING FEMALE IRON ADAPTOR 76X3 659874 * JET BRAZING FEMALE IRON ADAPTOR 108X4 659875 * JET BRAZING MALE IRON ADAPTOR 67X2.1/2 659876 * JET BRAZING MALE IRON ADAPTOR 76X3 659877 * JET BRAZING MALE IRON ADAPTOR 108X4 659926 * JET BRAZING FEM IRON ADAPTOR 67X21.1/2

Approval Holder:

Wolseley UK

Company Name

Wolseley UK

Address

K2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Phone

01926 705792

View All Listings by this Company

Manufacturer:

Zhejiang Hailiang Co Ltd

Company Name

Zhejiang Hailiang Co Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company