Range of copper press fittings with EPDM ‘O’-rings for use with EN1057 copper tube. The joints are achieved by means of a press tool. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2107306

Size:

See model

Marking:

JT, WRAS & size on body.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

Press fitting-elbow 90°CXC MP5090: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Press fitting-elbow 90°FTGXC MP5092: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Press fitting-elbow 45° CXC MP5041: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Press fitting-elbow 45°FtgxC MP5040 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Press fitting-crossover CXC MP5085: 15mm, 22mm, 28mm Press fitting-crossover FTGXC MP5086: 15mm, 22mm, 28mm Press fittng-Straight Coupling MP5270: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Press fitting-equal tee MP5130: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Press fitting-reducing Tee MP5130R: 15x15x22mm 22x15x15mm 22x15x22mm 22x22x15mm 22x22x28mm 28x15x15mm 28x15x22mm 28x22x15mm 28x22x22mm 28x22x28mm 28x28x15mm 28x28x22mm 28x28x35mm 35x22x22mm 35x22x35mm 35x28x22mm 35x28x28mm 35x28x35mm 35x35x15mm 35x35x22mm 35x35x28mm 40x28x28mm 42x35x35mm 42x28x42mm 42x35x42mm 42x42x15mm 42x42x22mm 42X42X28mm 42X42X35mm 54X54X15mm 54X54X28mm 54X54X35mm 54X42X42mm 54X54X42mm Press fitting-fitting reducer FTGXC MP5243: 22x15mm 28x15mm 28x22mm 35x15mm 35x22mm 35x28mm 42x15mm 42x22mm 42x28mm 42x35mm 54x15mm 54x22mm 54x28mm 54x35mm 54x42mm Press fitting- reducer CXC MP5240 22x15mm 28x15mm 28x22mm 35x15mm 35x22mm 35x28mm 42x15mm 42x22mm 42x28mm 42x35mm 54x15mm 54x22mm 54x28mm 54x35mm 54x42mm Press fitting-end stop MP5301: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm

Product Images

Approval Holder:

Ningbo Jintian Copper Tube Co Ltd

Company Name

Ningbo Jintian Copper Tube Co Ltd

Address

No.1 ChengXi West Road, CiCheng, NingBo

Country

China

Phone

0086 574 8757 4425

General Email

audrey@jtcorp.com.cn

View All Listings by this Company

‘Multi Press Leak M.P.L’. range of fittings (pressing profile TH and U) for use with Alpex Duo XS multi-layered pipe. For above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2110344

Size:

16mm - 32mm

Marking:

Fitting: Ivar & logo, MPL and other technical information on body. Pipe: Frankische Alpex Duo XS and other technical information on body.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

‘Multi Press Leak M.P.L’. range of fittings for use with Alpex Duo XS multi-layered pipe.

Product Images

Approval Holder:

IVAR S.p.A.

Company Name

IVAR S.p.A.

Address

Via IV Novembre, 181. 25080 Prevalle (BS)

Country

Italy

Phone

+39 030 680028

General Email

info@ivar.it

View All Listings by this Company

Manufacturer:

Ivar S.P.A.& Frankische Rohrwerke Gebr. Kirchner GmbH & Co. KG

Company Name

Ivar S.P.A.& Frankische Rohrwerke Gebr. Kirchner GmbH & Co. KG

Address

Via IV Novembre, 181, 25080 Prevalle (BS)

Country

Italy

General Email

View All Listings by this Company

‘Comisa’ range of brass bodied press-fit and threaded fittings for use with `Comisa’ (PE-RT/AL/PE-LMD) multi-layer pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2111309

Size:

See model

Marking:

Fittings: Comisa logo, DVGW, size, made in Italy on body. Pipe: Comisa, size, pressure, date of manufacture (DD.MM.YY) (HH.MM) and other technical information on body. Date Code: 111=first four months 11=second four months 1=last four months J=2020 K=2021

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

Press fittings: Straight coupler: 87.10.160: MU0870000160 16 x 2, 87.10.200: MU0870000200 20 x 2, 87.10.260: MU0870000260 26 x 3. Reducing coupling double: 87.11.201: MU0870R20160 20 x 2 - 16 x 2, 87.11.260: MU0870R26160 26 x 3 - 16 x 2, 87.11.263: MU0870R26200 26 x 3 - 20 x 2. Male Coupling: 87.12.150: MU0871003160 16 x 2 - ⅜”, 87.12.160 : MU0871005160 16 x 2 - ½”, 87.12.164: MU0871007160 16 x 2 - ¾”, 87.12.200: MU0871005200 20 x 2 - ½”, 87.12.201: MU0871007200 20 x 2 - ¾”, 87.12.255: MU0871005260 26 x 3 - ½”, 87.12.260: MU0871007260 26 x 3 - ¾”, 87.12.261: MU0871010260 26 x 3 - 1”. Female Coupling: 87.13.160 : MU0880005160 16 x 2 - ½”, 87.13.164: MU0880007160 16 x 2 - ¾”, 87.13.200: MU0880005200 20 x 2 - ½”, 87.13.201: MU0880007200 20 x 2 - ¾”, 87.13.255: MU0880005260 26 x 3 - ½”, 87.13.260: MU0880007260 26 x 3 - ¾”, 87.13.261: MU0880010260 26 x 3 - 1”. Elbow 90°: 87.14.160: MU0860000160 16 x 2, 87.14.200: MU0860000200 20 x 2, 87.14.260: MU0860000260 26 x 3. Male Elbow 90°: 87.16.160: MU0861005160 16 x 2 - ½”, 87.16.164: MU0861007160 16 x 2 - ¾”, : MU0861003160 16 x ⅜”, 87.16.200: MU0861005200 20 x 2 - ½”, 87.16.201: MU0861007200 20 x 2 - ¾”, 87.16.260: MU0861007260 26 x 3 - ¾”, 87.16.265: MU0861010260 26 x 3 - 1”. Female Elbow 90°: 87.17.159: MU08620H5160 - 16 x 2 - ½” 87.17.160: MU0862005160 - 16 x 2 - ½” 87.17.164: MU0862007160 - 16 x 2 - ¾” 87.17.200: MU0862005200 - 20 x 2 - ½” 87.17.201: MU0862007200 - 20 x 2 - ¾” 87.17.260: MU0862007260 - 26 x 3 - ¾” 87.17.265: MU0862010260 - 26 x 3 - 1” Tee: 87.18.160: MU0850000160 - 16 x 2 87.18.200: MU0850000200 - 20 x 2 87.18.260: MU0850000260 - 26 x 3 Tee reduced middle section: 87.19.201: MU085300BAB0 - 20 x 2 - 16 x 2 - 20 x 2 87.19.261: MU085300DAD0 - 26 x 3 - 16 x 2 - 26 x 3 87.19.263: MU085300DBD0 - 26 x 3 - 20 x 2 - 26 x 3 Reducing Tee: 87.20.202: MU085300BAA0 - 20 x 2 - 16 x 2 - 16 x 2 87.20.206: MU085300BBA0 - 20 x 2 - 20 x 2 - 16 x 2 87.20.260: MU085300DAB0 - 26 x 3 - 16 x 2 - 20 x 2 87.20.264: MU085300DBA0 - 26 x 3 - 20 x 2 - 16 x 2 87.20.265: MU085300DBB0 - 26 x 3 - 20 x 2 - 20 x 2 87.20.269: MU085300DDA0 - 26 x 3 - 26 x 3 - 16 x 2 87.20.270: MU085300DDB0 - 26 x 3 - 26 x 3 - 20 x 2 Tee enlarged middle section: 87.21.161: MU085300ABA0 - 16 x 2 - 20 x 2 - 16 x 2 87.21.201: MU085300BDB0 - 20 x 2 - 26 x 3 - 20 x 2 87.21.260: MU085300DED0 - 26 x 3 - 32 x 3 - 26 x 3 Male Tee: 87.22.160: MU0851005160 - 16 x 2 - ½” - 16 x 2 87.22.200: MU0851005200 - 20 x 2 - ½” - 20 x 2 87.22.201: MU0851007200 - 20 x 2 - ¾” - 20 x 2 87.22.260: MU0851005260 - 26 x 3 - ½” - 26 x 3 87.22.261: MU0851007260 - 26 x 3 - ¾” - 26 x 3 87.22.262: MU0851010260 - 26 x 3 - 1” - 26 x 3 Female Tee: 87.23.160: MU0852005160 - 16 x 2 - ½” - 16 x 2 87.23.200: MU0852005200 - 20 x 2 - ½” - 20 x 2 87.23.201: MU0852007200 - 20 x 2 - ¾” - 20 x 2 87.23.260: MU0852005260 - 26 x 3 - ½” - 26 x 3 87.23.261: MU0852526200 - 26 x 3 - ½” - 20 x 2 87.23.263: MU0852007260 - 26 x 3 - ¾” - 26 x 3 Wallplate elbow-short 90°: 87.24.145: MU0863003160 - 16 x 2 - ⅜” h. 39mm 87.24.160: MU0863005160 - 16 x 2 - ½” h. 39mm 87.24.161: MU08630H5160 - 16 x 2 - ½” h. 52mm 87.24.200: MU0863005200 - 20 x 2 - ½” h. 52mm 87.24.201: MU0863007200 - 20 x 2 - ¾” h. 52 mm 87.24.260: MU0863007260 - 26 x 3 - ¾” h. 52mm Wallplate elbow-double short 90°: 87.25.160: MU0864005160 - 16 x 2 - ½” - 16 x 2 h. 52mm 87.25.200: MU0864005200 - 20 x 2 - ½” - 20 x 2 h. 52mm Wallplate elbow-long 90°: 87.26.160: MU0863L05160 - 16 x 2 ½” h. 78mm 87.26.200: MU0863L05200 - 20 x 2 ½” h. 78mm Wallplate elbow for series connections: 87.26.205: MU0865005160 - 16 x 2 - ½” F - 16 x 2 - h 52 mm 87.26.210: MU0865005200 - 20 x 2 - ½” F - 20 x 2 - h 52 mm Wallplate elbow U-shaped 180°: 87.27.216: MU0884005160 - 16 x 2 - ½” 87.27.220: MU0884005200 - 20 x 2 - ½” Wallplate elbow U-shaped: 87.27.160: MU0887005160 - 16 x 2 - ½” - 16 x 2 87.27.200: MU0887005200 - 20 x 2 - ½” - 20 x 2 Cistern connector ¾” M x ½” F: 87.33.105: MU0867005160 - 16 x 2 - h 78 mm 87.33.115: MU0867005200 - 20 x 2 - h 78 mm WC Cistern Elbow: 87.28.160: MU0856005160 - 16 x 2 - ½” 87.28.200: MU0856005200 - 20 x 2 - ½” WC Cistern T-Piece: 87.29.160: MU0857005160 - 16 x 2 - ½” - 16 x 2 87.29.200: MU0857005200 - 20 x 2 - ½” - 20 x 2 Elbow 45°: 87.30.260: MU0866000260 - 26 x 3 Elbow 45°, Stop end: 87.31.160: MU0881000160 - 16 x 2 87.31.200: MU0881000200 - 20 x 2 87.31.260: MU0881000260 - 26 x 3 Male angle screw connector 90°: 87.34.160: MU0868005160 - 16 x 2 87.34.200: MU0868005200 - 20 x 2 - ½” 87.34.201: MU0868007200 - 20 x 2 - ¾” Female angle screw connector 90°: 87.35.160: MU0869005160 - 16 x 2 - ½” 87.35.200: MU0869005200 - 20 x 2 - ½” 87.35.201: MU0869007200 - 20 x 2 - ¾” Female screw fitting, flat seal: 87.36.160: MU0883005160 - 16 x 2 - ½” 87.36.161: MU0883007160 - 16 x 2 - ¾” 87.36.200: MU0883005200 - 20 x 2 - ½” 87.36.201: MU0883007200 - 20 x 2 - ¾” 87.36.260: MU0883007260 - 26 x 3 - ¾” 87.36.261: MU0883010260 - 26 x 3 - 1” Male screw fitting, tapered: 87.37.160: MU0873005160 - 16 x 2 - ½” 87.37.161: MU0873007160 - 16 x 2 - ¾” 87.37.200: MU0873005200 - 20 x 2 - ½” 87.37.201: MU0873007200 - 20 x 2 - ¾” 87.37.260: MU0873007260 - 26 x 3 - ¾” 87.37.261: MU0873010260 - 26 x 3 - 1” Connecting screw fitting with Euro cone raw: 87.39.160: MU087500716L 16 x 2 - ¾” 87.39.200: MU087500720L 20 x 2 - ¾” 87.39.260: MU087501026L 26 x 3 - 1” Screw connector, flat seal: 87.42.140: MU087600316L 16 x 2 - ⅜” 87.42.150: MU087600516L 16 x 2 - ½” 87.42.160: MU087600716L 16 x 2 - ¾” 87.42.170: MU087600520L 20 x 2 - ½” 87.42.200: MU087600720L 20 x 2 - ¾” 87.42.260: MU087601026L 26 x 3 - 1” : MU087600726L 26 x ¾" Tee By-pass: 87.49.010: MU0888000160 - 16 x 16 x 16 87.49.015: MU088800BAA0 - 20 x 16 x 16 87.49.020: MU088800BAB0 - 20 x 16 x 20 87.49.025: MU0888000200 - 20 x 20 x 20 NP Nipples press + insert: 87.47.055: MU0886016120 - 16x2 - 12 mm Nipples press + insert: 87.47.060: MU0886016150 - 16 x 2 - 15 mm 87.47.070: MU0886020220 - 20 x 2 - 22 mm Elbow press x compression: 87.47.110: MU0858016100 - 16 x 2 -10 mm 87.47.115: MU0858016150 - 16 x 2 -15 mm Quick press connection (2 pieces): 87.50.100 VA0844000160 - 16 x 2 87.50.105 VA0844000200 - 20 x 2 Disaligned tee fittings, on mounting plate, for Multiple conn: 87.54.034: MU0830005160 - 16 x 2 - ½” F - 16 x 2 87.54.035: MU0830005200 - 20 x 2 - ½” F - 20 x 2 Disaligned end fittings, on mounting plate: 87.54.039: MU0831005160 - 16 x 2 - ½” F - 16 x 2 87.54.040: MU0831005200 - 20 x 2 - ½” F - 20 x 2 disaligned fittings: 87.54.032: MU0891005160 - 16 x 2 - ½” F 16 x 2 87.54.033: MU0891005200 - 20 x 2 - ½” F 20 x 2 Wallplate elbow assembled in set: 87.54.005: MU0832005160 - 16 x 2 - ½” 87.54.019: MU0832005200 - 20 x 2 - ½” 87.54.020: MU0832007200 - 20 x 2 - ¾” Wallplate elbow 16 x 2 - ½” h. 52 mm with soundproof elements assembled in set: 87.54.030: MU0833005160 - 16 x 2 ½” Sanitary mounting plate assembled with 2 wallplate elbows, distance 76 mm: 87.54.060: MU0834005160 ½” - 16 x 2 87.54.061: MU0834005200 ½” - 20 x 2 Sanitary mounting plate assembled with 2 wallplate elbows, distance152 mm: 87.54.065: MU0835005160 ½” - 16 x 2 87.54.066: MU0835005200 ½” - 20 x 2 Press elbow swivel nut ½x16: MU0892005160 - 16x½" Press elbow swivel nut ¾x16: MU0892007160 - 16x¾" Press elbow swivel nut ¾x20: MU0892007200 - 20x¾" Press elbow swivel nut ¾x26: MU0892007260 - 26x¾" kit plaster fittings 90 ° - ½ "female 16x2,0 comisa press: MU08590KT010 ½" female 16x2 MU08590KT020 ½"female 20x2 Threaded fittings: Straight coupling: 88.03.415: RM057000016N - 16 x 2 88.03.420: RM057000X16N - 16 x 2 88.03.435: RM057000020N - 20 x 2 Straight reduction: 88.03.855: RM0570R2016N - 20 x 2 - 16 x 2 Male straight coupling ISO 7/2: 88.03.515: RM057100516N - 16 x 2 - ½” 88.03.520: RM05710X516N - 16 x 2 - ½” 88.03.535: RM057100520N - 20 x 2 - ½” 88.03.540: RM057100716N - 16 x 2 - ¾” 88.03.555: RM057100720N - 20 x 2 - ¾” Male straight coupling with O-Ring seal: 88.03.610: RM057200516N - 16 x 2 - ½” 88.03.620: RM05720X516N - 16 x 2 - ½” 88.03.635: RM057200520N - 20 x 2 - ½” Female straight coupling: 88.03.710: RM058000516N - 16 x 2 - ½” 88.03.715: RM05800X516N - 16 x 2 - ½” 88.03.730: RM058000520N - 20 x 2 - ½” 88.03.735: RM058000716N - 16 x 2 - ¾” 88.03.750: RM058000720N - 20 x 2 - ¾” Pressure test plugs: 87.31.605: RM058100016N - 16 x 2 87.31.615: RM058100020N - 20 x 2 Elbow 90°: 88.04.015: RM056000016N - 16 x 2 88.04.020: RM056000X16N - 16 x 2 88.04.035: RM056000020N - 20 x 2 Male elbow 90°: 88.04.115: RM056100516N - 16 x 2 - ½” 88.04.120: RM05610X516N - 16 x 2 - ½” 88.04.135: RM056100520N - 20 x 2 - ½” 88.04.140: RM056100716N - 16 x 2 - ¾” 88.04.155: RM056100720N - 20 x 2 - ¾” Female elbow 90°: 88.04.215: RM056200516N - 16 x 2 - ½” 88.04.220: RM05620X516N - 16 x 2 - ½” 88.04.235: RM056200520N - 20 x 2 - ½” 88.04.240: RM056200716N - 16 x 2 - ¾” 88.04.255: RM056200720N - 20 x 2 - ¾” Elbow with wallplate 90°: 88.04.315: RM056300516N - 16 x 2 - ½” 88.04.320: RM05630X516N - 16 x 2 - ½” 88.04.335: RM056300520N - 20 x 2 - ½” 88.04.350: RM056300716N - 16 x 2 - ¾” 88.04.365: RM056300720N - 20 x 2 - ¾” Tee: 88.04.515: RM055000016N - 16 x 16 x 16 88.04.520: RM055000X16N - 16 x 16 x 16 88.04.535: RM055000020N - 20 x 20 x 20 Reducing Tee: 88.04.558: RM055300BAAN - 20 x 2 - 16 x 2 - 16 x 2 88.04.560: RM055300BABN - 20 x 2 - 16 x 2 - 20 x 2 88.04.566: RM055300BBAN - 20 x 2 - 20 x 2 - 16 x 2 Male Tee: 88.04.715: RM055100516N - 16 x ½” x 16 88.04.720: RM055100716N - 16 x ¾” x 16 88.04.735: RM055100720N - 20 x ¾” x 20 Female Tee: 88.04.615: RM055200516N - 16 x ½” x 16 88.04.620: RM05520X516N - 16 x ½” x 16 88.04.635: RM055200520N - 20 x ½” x 20 88.04.640: RM055200716N - 16 x ¾” x 16 88.04.655: RM055200720N - 20 x ¾” x 20 Nipples press x compression: 87.47.020: MU0877016150 - 16 x 2 - 15 mm 87.47.030: MU0877020220 - 20 x 2 - 22 mm 87.47.035: MU0877026220 - 26 x 3 - 22 mm 87.47.040: MU0877026280 - 26 x 3 - 28 mm 87.47.080: MU0886I20220 - 20 x 2 - 22 mm Ireland 87.47.081: MU0886I26220 - 26 x 3 - 22 mm Ireland : MU0886026220 - 26 x 3 - 22 mm

Product Images

Approval Holder:

Comisa S.p.A

Company Name

Comisa S.p.A

Address

Via Neziole, Zona Artigianale 27 25055 Pisogne (BS)

Country

Italy

Phone

+39 0364 896861

General Email

export@comisa.it

View All Listings by this Company

Manufacturer:

Comisa S.p.A

Company Name

Comisa S.p.A

Address

Via Neziole, Zona Artigianale 27 25055 Pisogne (BS)

Country

Italy

Phone

+39 0364 896861

General Email

export@comisa.it

View All Listings by this Company

ERA-01 range of SDR11 and SDR17 polyethylene butt welded fittings for use with ERA-02 range of SDR11 and SDR17 PE 100 pipe. SDR11 rated pipe and fittings have a maximum working pressure of 16.0 bar. SDR17 rated pipe and fittings have a maximum working pressure of 10.0 bar. For above and below ground use. Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112025

Size:

SDR11 pipe and fittings = DN75 – DN315. SDR17 pipe and fittings = DN160 – DN315.

Marking:

‘ERA®’ and technical information on pipe and fitting.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

ERA-01 range of fittings (90° elbow, 45° elbow, flange, cross, straight tee, reducing cross, reducing tee, end cap and reducing socket) for use with ERA-02 pipe.

Product Images

Approval Holder:

ERA Piping (Zhejiang) Co.,Ltd.

Company Name

ERA Piping (Zhejiang) Co.,Ltd.

Address

No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

ERA Piping (Zhejiang) Co.,Ltd.

Company Name

ERA Piping (Zhejiang) Co.,Ltd.

Address

No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang

Country

China

View All Listings by this Company

Range of copper press fittings with EPDM seals for use with EN1057 copper tube. The joints are achieved by means of a press tool. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112303

Size:

see models

Marking:

Company logo (HS) and size on body

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

6002(Press 90° Bend C×C) 12,15,22,28,35,42,54mm 6001(Press 90° Bend FTG×C) 12,15,22,28,35,42,54mm 6041(Press 45° Bend C×C) 12,15,22,28,35,42,54mm 6040(Press 45° Bend FTG×C) 12,15,22,28,35,42,54mm 6130(Press Tee C×C×C) 12,15,22,28,35,42,54mm 6301(Press Cap) 12,15,22,28,35,42,54mm 6270(Press CouplingC×C) 12,15,22,28,35,42,54mm 6130R(Press ReducingTee C×C×C) 15×15×12, 22×22×15, 22×22×12, 22×15×15, 22×15×22, 28×28×22, 28×28×15, 28×15×22, 28×22×22, 28×15×28, 28×22×28, 35×35×28, 35×35×22,35×35×15, 42×42×35, 42×42×28, 42×42×22, 42×42×15, 54×54×42, 54×54×35, 54×54×28, 54×54×22 6240 (Press Reducing Coupling C×C) 15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28, 42×22, 54×42, 54×35; 6243 (Press Fitting Reducer Ftg×C) 15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28, 42×22, 54×42, 54×35, 54×28, 54×22

Approval Holder:

Ningbo Hengsheng Pipe Fitting Co Ltd

Company Name

Ningbo Hengsheng Pipe Fitting Co Ltd

Address

No. 28 West Jinshui Road, Ninghai, Zhejiang

Country

China

Phone

0086-574-65338995

General Email

sales@hengshen.com

View All Listings by this Company