Combination Tap Assemblies
Section Code 0445 : Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
Back To Directory Sections
WRAS Approval Number: #2107060
Single-hole single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member and a pull-out spray.
The pull-out spray hose is stainless steel braided and has a.
The pull-out spray outlet incorporates a button which changes and/or stops the flow of water, a plastic aerator and check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection.
- Section:
- 0445 Combination Tap Assemblies
- Section Subtitle:
- Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2107060
- Size:
- Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
- Marking:
- LOTA on base of body
- Installation Requirements:
- R001 R009 R090
- Expiry date:
- 31/07/2026
- Model:
-
62871-0001
Product Images
- Approval Holder:
- Xiamen Lota International Co. Ltd.
Company Name
Xiamen Lota International Co. Ltd.
Address
No 61 Xingnan Road
Jimei District Xiamen
361022
Country
China
View All Listings by this Company - Manufacturer:
- Xiamen Lota International Co. Ltd.
Company Name
Xiamen Lota International Co. Ltd.
Address
No 61 Xingnan Road
Jimei District Xiamen
361022
Country
China
View All Listings by this Company
WRAS Approval Number: #2107328
Range of single hole, single outlet (swivel) pull down spray combination tap assemblies (brass bodies - various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member.
The connection between the body and the spout incorporates an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection.
The outlet incorporates a plastic aerator.
The products are supplied with optional ½” BSP (F) x ⅜ BSP (M) brass adaptors and NBR washers for installation on each inlet hose.
Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.
- Section:
- 0445 Combination Tap Assemblies
- Section Subtitle:
- Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2107328
- Size:
- Stainless steel braided EPDM lined flexible hose assemblies with ⅜” captive nut end connections.
- Marking:
- Comap on body.
- Installation Requirements:
- R001
- Expiry date:
- 31/07/2026
- Model:
-
Jeroni Chef Range:
922138 (Chrome Body/Black Spout).
922139 (Brushed Nickel Body/Black Spout).
922140 (White Body/Grey Spout).
922141 (Black Body / Black Spout).
922145 (Gun Metal Bdy/Black Spout).
922146 (Antique Brass Body/Black Spout).
922147 (Copper Body / Black Spout).
Product Images
- Approval Holder:
- StH Westco Ltd
Company Name
StH Westco Ltd
Address
Unit C6
William Way
Moss Industrial Estate
St Helens Road
Leigh
Postcode
WN7 3PT
Country
United Kingdom
Phone
01942 265230
View All Listings by this Company
WRAS Approval Number: #2109364
Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headworks with single lever operating members and pull-down spray handset. The spout outlet incorporates a plastic aerator. The product is supplied with a metal backnut.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
- Section:
- 0445 Combination Tap Assemblies
- Section Subtitle:
- Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2109364
- Size:
- Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
- Marking:
- DTC15 on rear of body.
Deva on operating member.
- Installation Requirements:
- R001 R009 R090
- Expiry date:
- 30/09/2026
- Model:
-
SLINKY118 slinky mono sink mixer
Product Images
- Approval Holder:
- Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court,
Yew Tree Way,
Golborne,
Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
View All Listings by this Company
WRAS Approval Number: #2112019
A range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (chrome plated), incorporating a ceramic cartridge headwork (models 63465-0001) or a quarter turn ceramic disc headwork (model 63461-0001) with single lever operating members.
The products incorporate a pull-out spray with a plastic aerator at the outlet.
The pull-out spray hose for model 63465-0001 incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Maximum working pressure 5.0 bar. Maximum working temperature 60°C.
- Section:
- 0445 Combination Tap Assemblies
- Section Subtitle:
- Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2112019
- Size:
- Stainless steel braided PEX lined flexible hose assembly incorporating a ½” BSP captive nut end connection.
- Marking:
- Lota on body
- Installation Requirements:
- R001 R006 R009 R010
- Expiry date:
- 31/12/2026
- Model:
-
63461-0001
63465-0001
Product Images
- Approval Holder:
- Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road
Jimei District
Xiamen, 361022
Country
China
View All Listings by this Company - Manufacturer:
- Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road
Jimei District
Xiamen, 361022
Country
China
View All Listings by this Company
WRAS Approval Number: #2111360
Single hole, single outlet (swivel) combination tap assembly (chrome plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and pull out spray handset.
The outlet hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection
The spout outlet incorporates a plastic aerator.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
- Section:
- 0445 Combination Tap Assemblies
- Section Subtitle:
- Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment,
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2111360
- Size:
- Stainless steel braided, EPDM lined flexible hose assemblies incorporating ½” BSP (F) end connections.
- Marking:
- DTC25 (brand of Methven) on rear of body.
Methven on front of body.
- Installation Requirements:
- R001 R090
- Expiry date:
- 30/11/2026
- Model:
-
DUSMCP – Dunston Flexi Sink Mixer
Model added October 2023:
INST-MCP-2HKM
Product Images
- Approval Holder:
- Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court,
Yew Tree Way,
Golborne,
Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
View All Listings by this Company
Page 6 of 16
