Aquaflow range of polypropolene fittings for use with PE pipe (manufactured to EN 12201). Maximum working pressure 16 bar. Cold water use.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2207382

Size:

20mm – 63mm.

Marking:

Aquaflow, PN & size on nut.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

324A*****Q TEE REDUCING-AQUAFLOW 320******Q ADAPTOR MALE-AQUAFLOW 320A*****Q ADAPTOR FEMALE-AQUAFLOW 320B*****Q END PLUG-AQUAFLOW 321******Q COUPLING-AQUAFLOW 321A*****Q REDUCING COUPLING-AQUAFLOW 322******Q ELBOW-AQUAFLOW 322A*****Q ELBOW THREADED MALE-AQUAFLOW 322B*****Q ELBOW THREADED FEMALE-AQUAFLOW 322C*****Q ELBOW POP-UP-AQUAFLOW 322D*****Q WALL ELBOW-AQUAFLOW 323******Q TEE THREADED FEMALE-AQUAFLOW 323A*****Q TEE THREADED MALE-AQUAFLOW 323C*****Q CROSS TEE-AQUAFLOW 324******Q TEE 90°-AQUAFLOW 324B*****Q TEE INCREASING-AQUAFLOW 320C*****Q FLANGED ADAPTOR -AQUAFLOW 320D*****Q FLANGED ADAPTOR-AQUAFLOW 321B*****Q REPAIR COUPLING-AQUAFLOW 321C*****Q CONVERSION REDUCER/UNIVERSAL ADAPTOR-AQUAFLOW 321D***** GLOBAL TRANSITION COUPL. -AQUAFLOW Where XXX-YYY-ZZZ for product family codes with only 3 digits 330 (standard code prefix) – yyy (1st end diameter) -zzz (2nd end diameter) Xxx(x)-yyy-zz for product family codes with e alter as a firth digit 330A (A standard code) – (063) yyy diameter – (06) zz threaded diameter.

Approval Holder:

Kalsi Plastics (UK) Limited

Company Name

Kalsi Plastics (UK) Limited

Address

Kalsi House 5 Tomey Road Sparkhill

Postcode

B11 2NJ

Country

Birmngham

General Email

george.argiropoulos@elysee.com.cy

View All Listings by this Company

Range of black polyethylene electrofusion fittings for use with PE100 pipe (manufactured to EN 12201-2). Please refer to model for maximum working pressures. For below ground and cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211026

Size:

DN20 – DN400.

Marking:

Euro, PE100, size, SDR, PN and date of manufacture (MM/YY) on body.

Installation Requirements:

R001 R008

Expiry date:

30/11/2027

Model:

For use with SDR7.4 pipe – maximum working pressure 25.0 bar: 21.00.25 Electrofusion Socket: DN20 to DN315. 21.11.25 90° Electrofusion Elbow: DN25 to DN200. 21.16.25 45° Electrofusion Elbow: DN32 to DN160. 21.36.25 Electrofusion Cap: DN20 to DN160. For use with SDR11 pipe - maximum working pressure 16.0 bar: 21.00.16 Electrofusion Socket: DN75 to DN160. 21.11.16 90° Electrofusion Elbow: DN25 to DN200. 21.16.16 45° Electrofusion Elbow: DN32 to DN160. 21.36.16 Electrofusion Cap: DN75 to DN160. 21.21.16 90° Electrofusion Tee: DN25 to DN200. 21.20.16 & 21.20.16 A Electrofusion Spigot Saddle: DN40 to DN250. 21.51.16 Electrofusion Reducer: DN32 x DN20 to DN160 x DN125 For use with SDR17 pipe - maximum working pressure 10.0 bar: 21.00.10 Electrofusion Socket: DN400.

Product Images

Approval Holder:

Eurostandard Spa

Company Name

Eurostandard Spa

Address

Zona Industriale Lago, 22, 38038 Tesero (TN)

Country

Italy

View All Listings by this Company

Manufacturer:

Eurostandard Spa

Company Name

Eurostandard Spa

Address

Zona Industriale Lago, 22, 38038 Tesero (TN)

Country

Italy

View All Listings by this Company

Range of tank and cistern connectors, with push fittings. Models CM0715S and CM0722S are for use with copper tube (manufactured to BS EN 1057) PE-X pipe (BS7291-3) & PB pipe (BS7291-2). Until April 2023, model CM0728S was only for use with copper tube (manufactured to BS EN 1057). From May 2023, model CM0728S is also for use with PE-X pipe (BS7291-3) & PB pipe (BS7291-2). Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2212014

Size:

15mm, 22mm, 28mm - pushfit

Marking:

John Guest logo “JG” (brand of Reliance Worldwide Corporation (UK) Ltd.) and size on body.

Installation Requirements:

R001

Expiry date:

31/12/2027

Model:

CM0715S - 15mm Tank Connector. CM0722S - 22mm Tank Connector. CM0728S - 28mm Tank Connector.

Product Images

Approval Holder:

Reliance Worldwide Corporation (UK) Ltd.

Company Name

Reliance Worldwide Corporation (UK) Ltd.

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 (0)1895 449233

View All Listings by this Company

Manufacturer:

Reliance Worldwide Corporation (UK) Ltd.

Company Name

Reliance Worldwide Corporation (UK) Ltd.

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 (0)1895 449233

View All Listings by this Company

Range of ‘Superseal’ and ‘Speedfit’ push-fit fittings with acetal body’s (black or light grey) and NBR ‘O’ rings. For use with John Guest LLDPE tubing (Speedfit port only) and 316 stainless steel tubing manufactured to EN10088 (Superseal push-fit port only). Pipe inserts must be used for the LLDPE tube sizes 3/8” and ½”. Maximum working pressure: See models below. For cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2301017

Size:

See models.

Marking:

JG LOGO on body. Size on collet.

Installation Requirements:

R001

Expiry date:

31/01/2028

Model:

SM010802S - 5/16" Superseal OD x 1/4" BSPT (M) STRAIGHT ADAPTOR 16 Bar, SM010812S - 5/16" Superseal OD x 1/4" BSP (M) STRAIGHT ADAPTOR 16.0 Bar, SM0108F4S - 5/16" Superseal OD x 1/4" MFL STRAIGHT ADAPTOR 16.0 Bar, SM410808E - 5/16" Superseal OD x 5/16" Superseal OD STRAIGHT ADAPTOR 16.0 Bar, SM040808S - 5/16" Superseal OD x 5/16" Speedfit OD STRAIGHT CONNECTOR 16.0 Bar, SI041012S - 5/16" Superseal OD x 3/8" Speedfit OD STRAIGHT CONNECTOR 10.0 Bar, SI041016S - 5/16" Superseal OD x 1/2" Speedfit OD STRAIGHT CONNECTOR 10.0 Bar, SI041210S - 3/8" Superseal OD x 5/16" Speedfit OD STRAIGHT CONNECTOR 10.0 Bar, SI041212S - 3/8" Superseal OD x 3/8" Speedfit OD STRAIGHT CONNECTOR 10.0 Bar, SI041216S - 3/8" Superseal OD x 1/2" Speedfit OD STRAIGHT CONNECTOR 10.0 Bar, SM040608E - 6MM Superseal OD x 8MM Speedfit OD STRAIGHT CONNECTOR 16.0 Bar, SM400808S - 5/16" Superseal OD x 5/16" Superseal OD ELBOW CONNECTOR 16.0 Bar, SI401210S - 3/8" Superseal OD x 5/16" Superseal OD ELBOW CONNECTOR 10.0 Bar, SI401212S - 3/8" Superseal OD x 3/8" Superseal OD ELBOW CONNECTOR 10.0 Bar, SI030812S - 1/4" Superseal OD x 3/8" Speedfit OD ELBOW CONNECTOR 10.0 Bar, SM030808S - 5/16" Superseal OD x 5/16" Speedfit OD ELBOW CONNECTOR 16.0 Bar, SI031012S - 5/16" Superseal OD x 3/8" Speedfit OD ELBOWCONNECTOR 10.0 Bar, SI031210S - 3/8" Superseal OD x 5/16" Speedfit OD ELBOWCONNECTOR 10.0 Bar, SI031212S - 3/8" Superseal OD x 3/8" Speedfit OD ELBOW CONNECTOR 10.0 bar, SM420808S - 5/16" Superseal OD x 5/16" Speedfit OD FLOWBEND CONNECTOR 16.0 Bar, SI421012S - 5/16" Superseal OD x 3/8" Speedfit OD FLOW BEND CONNECTOR 10.0 Bar, SI421212S - 3/8" Superseal OD x 3/8" Speedfit OD FLOW BEND CONNECTOR 10.0 Bar, SI270808S - 1/4" Superseal OD x 1/4" ID BARB CONNECTOR 16.0 Bar, SI271008S - 5/16" Superseal OD x 1/4" ID BARB CONNECTOR 16.0 Bar, SI271208S - 3/8" Superseal OD x 1/4" ID BARB CONNECTOR 10.0 Bar, SM120808S - 5/16" Superseal OD x 5/16" Speedfit OD BULKHEAD CONNECTOR 16.0 Bar.

Approval Holder:

Reliance Worldwide Corporation UK Ltd

Company Name

Reliance Worldwide Corporation UK Ltd

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

View All Listings by this Company

Manufacturer:

Reliance Worldwide Corporation UK Ltd

Company Name

Reliance Worldwide Corporation UK Ltd

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

View All Listings by this Company

Range of press-fit fittings with stainless steel bodies incorporating EPDM ‘O’-rings for use with SS316L pipes. Maximum working pressure 16 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303335

Size:

see model

Marking:

YS, size on body

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

STRAIGHT COUPLING SM3270 316L001515 – 15 mm SM3270 316L001818 – 18mm SM3270 316L002222 – 22mm SM3270 316L002828 – 28mm SM3270 316L003535 – 35mm SM3270 316L004242 – 42mm SM3270 316L005454 – 54mm SM3270 316L006666 – 66.7mm SM3270 316L007676 – 76.1mm SM3270 316L008888 – 88.9mm SM3270 316L00X8X8 – 108mm SLIP COUPLING SM3274 316L001515 – 15mm SM3274 316L001818 – 18mm SM3274 316L002222 – 22mm SM3274 316L002828 – 28mm SM3274 316L003535 – 35mm SM3274 316L004242 – 42mm SM3274 316L005454 – 54mm SM3274 316L006666 – 66.7mm SM3274 316L007676 – 76.1mm SM3274 316L008888 – 88.9mm SM3274 316L00X8X8 – 108mm 90 DEGREE EQUAL ELBOW SM3090 316L001515 – 15mm SM3090 316L001818 – 18mm SM3090 316L002222 – 22mm SM3090 316L002828 – 28mm SM3090 316L003535 – 35mm SM3090 316L004242 – 42mm SM3090 316L005454 – 54mm SM3090 316L006666 – 66.7mm SM3090 316L007676 – 76.1mm SM3090 316L008888 – 88.9mm SM3090 316L00X8X8 – 108mm 90 DEGREE STREET ELBOW SM3092 316L001515 – 15mm SM3092 316L001818 – 18mm SM3092 316L002222 – 22mm SM3092 316L002828 – 28mm SM3092 316L003535 – 35mm SM3092 316L004242 – 42mm SM3092 316L005454 – 54mm SM3092 316L006666 – 66.7mm SM3092 316L007676 – 76.1mm SM3092 316L008888 – 88.9mm SM3092 316L00X8X8 – 108mm 45 DEGREE EQUAL ELBOW SM3041 316L001515 – 15mm SM3041 316L001818 – 18mm SM3041 316L002222 – 22mm SM3041 316L002828 – 28mm SM3041 316L003535 – 35mm SM3041 316L004242 – 42mm SM3041 316L005454 – 54mm SM3041 316L006666 – 66.7mm SM3041 316L007676 – 76.1mm SM3041 316L008888 – 88.9mm SM3041 316L00X8X8 – 108mm 45 DEGREE STREET ELBOW SM3040 316L001515 – 15mm SM3040 316L001818 – 18mm SM3040 316L002222 – 22mm SM3040 316L002828 – 28mm SM3040 316L003535 – 35mm SM3040 316L004242 – 42mm SM3040 316L005454 – 54mm SM3040 316L006666 – 66.7mm SM3040 316L007676 – 76.1mm SM3040 316L008888 – 88.9mm SM3040 316L00X8X8 – 108mm EQUAL TEE SM3130 316L151515 – 15mm SM3130 316L181818 – 18mm SM3130 316L222222 – 22mm SM3130 316L282828 – 28mm SM3130 316L353535 – 35mm SM3130 316L424242 – 42mm SM3130 316L545454 – 54mm SM3130 316L666666 – 66.7mm SM3130 316L767676 – 76.1mm SM3130 316L888888 – 88.9mm SM3130 316LX8X8X8 – 108mm REDUCING TEE SM3131 316L181815 – 18 x 18 x 15mm SM3131 316L222215 – 22 x 22 x 15mm SM3131 316L222218 – 22 x 22 x 18mm SM3131 316L282815 – 28 x 28 x 15mm SM3131 316L282818 – 28 x 28 x 18mm SM3131 316L282822 – 28 x 28 x 22mm SM3131 316L353515 – 35 x 35 x 15mm SM3131 316L353518 – 35 x 35 x 18mm SM3131 316L353522 – 35 x 35 x 22mm SM3131 316L353528 – 35 x 35 x 28mm SM3131 316L424215 – 42 x 42 x 15mm SM3131 316L424218 – 42 x 42 x 18mm SM3131 316L424222 – 42 x 42 x 22mm SM3131 316L424228 – 42 x 42 x 28mm SM3131 316L424235 – 42 x 42 x 35mm SM3131 316L545415 – 54 x 54 x 15mm SM3131 316L545418 – 54 x 54 x 18mm SM3131 316L545422 – 54 x 54 x 22mm SM3131 316L545428 – 54 x 54 x 28mm SM3131 316L545435 – 54 x 54 x 35mm SM3131 316L545442 – 54 x 54 x 42mm SM3131 316L666628 – 66.7 x 66.7 x 28mm SM3131 316L666635 – 66.7 x 66.7 x 35mm SM3131 316L666642 – 66.7 x 66.7 x 42mm SM3131 316L666654 – 66.7 x 66.7 x 54mm SM3131 316L767622 – 76.1 x 76.1 x 22mm SM3131 316L767628 – 76.1 x 76.1 x 28mm SM3131 316L767635 – 76.1 x 76.1 x 35mm SM3131 316L767642 – 76.1 x 76.1 x 42mm SM3131 316L767654 – 76.1 x 76.1 x 54mm SM3131 316L888822 – 88.9 x 88.9 x 22mm SM3131 316L888828 – 88.9 x 88.9 x 28mm SM3131 316L888835 – 88.9 x 88.9 x 35mm SM3131 316L888842 – 88.9 x 88.9 x 42mm SM3131 316L888854 – 88.9 x 88.9 x 54mm SM3131 316L888876 – 88.9 x 88.9 x 76.1mm SM3131 316LX8X822 – 108 x 108 x 22mm SM3131 316LX8X828 – 108 x 108 x 28mm SM3131 316LX8X835 – 108 x 108 x 35mm SM3131 316LX8X842 – 108 x 108 x 42mm SM3131 316LX8X854 – 108 x 108 x 54mm SM3131 316LX8X876 – 108 x 108 x 76.1mm SM3131 316LX8X888 – 108 x 108 x 88.9mm STOP END SM3301 316L000015 – 15mm SM3301 316L000018 – 18mm SM3301 316L000022 – 22mm SM3301 316L000028 – 28mm SM3301 316L000035 – 35mm SM3301 316L000042 – 42mm SM3301 316L000054 – 54mm SM3301 316L000066 – 66.7mm SM3301 316L000076 – 76.1mm SM3301 316L000088 – 88.9mm SM3301 316L0000X8 – 108mm FULL CROSSOVER SM3085 316L001515 – 15mm SM3085 316L001818 – 18mm SM3085 316L002222 – 22mm SM3085 316L002828 – 28mm PART CORSSOVER SM3086 316L001515 – 15mm SM3086 316L001818 – 18mm SM3086 316L002222 – 22mm SM3086 316L002828 – 28mm FLANGE SM3325 316L000015 – 15mm SM3325 316L000018 – 18mm SM3325 316L000022 – 22mm SM3325 316L000028 – 28mm SM3325 316L000035 – 35mm SM3325 316L000042 – 42mm SM3325 316L000054 – 54mm SM3325 316L000066 – 66.7mm SM3325 316L000076 – 76.1mm SM3325 316L000088 – 88.9mm SM3325 316L0000X8 – 108mm REDUCED COUPLING SM3240 316L001815 – 18 x 15mm SM3240 316L002215 – 22 x 15mm SM3240 316L002218 – 22 x 18mm SM3240 316L002815 – 28 x 15mm SM3240 316L002818 – 28 x 18mm SM3240 316L002822 – 28 x 22mm SM3240 316L003515 – 35 x 15mm SM3240 316L003518 – 35 x 18mm SM3240 316L003522 – 35 x 22mm SM3240 316L003528 – 35 x 28mm SM3240 316L004215 – 42 x 15mm SM3240 316L004218 – 42 x 18mm SM3240 316L004222 – 42 x 22mm SM3240 316L004228 – 42 x 28mm SM3240 316L004235 – 42 x 35mm SM3240 316L005415 – 54 x 15mm SM3240 316L005418 – 54 x 18mm SM3240 316L005422 – 54 x 22mm SM3240 316L005428 – 54 x 28mm SM3240 316L005435 – 54 x 35mm SM3240 316L005442 – 54 x 42mm SM3240 316L006628 – 66.7 x 28mm SM3240 316L006635 – 66.7 x 35mm SM3240 316L006642 – 66.7 x 42mm SM3240 316L006654 – 66.7 x 54mm SM3240 316L007642 – 76.1 x 42mm SM3240 316L007654 – 76.1 x 54mm SM3240 316L008854 – 88.9 x 54mm SM3240 316L008876 – 88.9 x 76.1mm SM3240 316L00X854 – 108 X 54mm SM3240 316L00X876 – 108 X 76.1mm SM3240 316L00X888 - 108 X 88.9mm FITTING REDUCER SM3243 316L001815 – 18 x 15mm SM3243 316L002215 – 22 x 15mm SM3243 316L002218 – 22 x 18mm SM3243 316L002815 – 28 x 15mm SM3243 316L002818 – 28 x 18mm SM3243 316L002822 – 28 x 22mm SM3243 316L003515 – 35 x 15mm SM3243 316L003518 – 35 x 18mm SM3243 316L003522 – 35 x 22mm SM3243 316L003528 – 35 x 28mm SM3243 316L004215 – 42 x 15mm SM3243 316L004218 – 42 x 18mm SM3243 316L004222 – 42 x 22mm SM3243 316L004228 – 42 x 28mm SM3243 316L004235 – 42 x 35mm SM3243 316L005415 – 54 x 15mm SM3243 316L005418 – 54 x 18mm SM3243 316L005422 – 54 x 22mm SM3243 316L005428 – 54 x 28mm SM3243 316L005435 – 54 x 35mm SM3243 316L005442 – 54 x 42mm SM3243 316L006628 – 66.7 x 28mm SM3243 316L006635 – 66.7 x 35mm SM3243 316L006642 – 66.7 x 42mm SM3243 316L006654 – 66.7 x 54mm SM3243 316L007642 – 76.1 x 42mm SM3243 316L007654 – 76.1 x 54mm SM3243 316L008854 – 88.9 x 54mm SM3243 316L008876 – 88.9 x 76.1mm SM3243 316L00X854 – 108 x 54mm SM3243 316L00X876 – 108 x 76.1mm SM3243 316L00X888 – 108 x 88.9mm C X MI COUPLING SM3253 316L015M12 – 15 x ½” BSP (M) SM3253 316L015M34 – 15 x ¾” BSP (M) SM3253 316L018M12 – 18 x ½” BSP (M) SM3253 316L018M34 – 18 x ¾” BSP (M) SM3253 316L022M12 – 22 x ½” BSP (M) SM3253 316L022M34 – 22 x ¾” BSP (M) SM3253 316L022M10 – 22 x 1” BSP (M) SM3253 316L028M34 – 28 x ¾” BSP (M) SM3253 316L028M10 – 28 x 1” BSP (M) SM3253 316L035M10 – 35 x 1” BSP (M) SM3253 316L035MA4 – 35 x 1 ¼” BSP (M) SM3253 316L042MA4 – 42 x 1 ¼” BSP (M) SM3253 316L042MA2 – 42 x 1 ½” BSP (M) SM3253 316L054MA2 – 54 x 1 ½” BSP (M) SM3253 316L054M20 – 54 x 2” BSP (M) SM3253 316L066M20 – 66.7 x 2” BSP (M) SM3253 316L076MA2 – 76.1 x 2 ½” BSP (M) SM3253 316L088M30 – 88.9 x 3” BSP (M) C X FI COUPLING SM3250 316L015F12 – 15 x ½” BSP (F) SM3250 316L015F34 – 15 x ¾” BSP (F) SM3250 316L018F12 – 18 x ½” BSP (F) SM3250 316L018F34 – 18 x ¾” BSP (F) SM3250 316L022F12 – 22 x ½” BSP (F) SM3250 316L022F34 – 22 x ¾” BSP (F) SM3250 316L022F10 – 22 x 1” BSP (F) SM3250 316L028F34 – 28 x ¾” BSP (F) SM3250 316L028F10 – 28 x 1” BSP (F) SM3250 316L035F10 – 35 x 1” BSP (F) SM3250 316L035FA4 – 35 x 1 ¼” BSP (F) SM3250 316L042FA4 – 42 x 1 ¼” BSP (F) SM3250 316L042FA2 – 42 x 1 ½” BSP (F) SM3250 316L054FA2 – 54 x 1 ½” BSP (F) SM3250 316L054F20 – 54 x 2” BSP (F) SM3250 316L066F20 – 66.7 x 2” BSP (F) SM3250 316L076FA2 – 76.1 x 2 ½” BSP (F) SM3250 316L088F30 – 88.9 x 3” BSP (F) SWIVEL COUPLING SM3260 316L015F12 – 15 x ½” BSP Captive nut SM3260 316L018F12 – 18 x ½” BSP Captive nut SM3260 316L022F34 – 22 x ¾” BSP Captive nut SM3260 316L028F10 – 28 x 1” BSP Captive nut SM3260 316L035FA4 – 35 x 1 ¼” BSP Captive nut SM3260 316L042FA2 – 42 x 1 ½” BSP Captive nut SM3260 316L054F20 – 54 x 2” BSP Captive nut C X C X MI TEE SM3230 316L215M12 – 15 x 15 x ½” BSP (M) SM3230 316L218M12 – 18 x 18 x ½” BSP (M) SM3230 316L218M34 – 18 x 18 x ¾” BSP (M) SM3230 316L222M12 – 22 x 22 x ½” BSP (M) SM3230 316L222M34 – 22 x 22 x ¾” BSP (M) SM3230 316L228M12 – 28 x 28 x ½” BSP (M) SM3230 316L228M34 – 28 x 28 x ¾” BSP (M) SM3230 316L228M10 – 28 x 28 x 1” BSP (M) SM3230 316L235M12 – 35 x 35 x ½” BSP (M) SM3230 316L235M34 – 35 x 35 x ¾” BSP (M) SM3230 316L235MA4 – 35 x 35 x 1 ¼” BSP (M) SM3230 316L242M34 – 42 x 42 x ¾” BSP (M) SM3230 316L242MA4 – 42 x 42 x 1 ¼” BSP (M) SM3230 316L242MA2 – 42 x 42 x 1 ½” BSP (M) SM3230 316L254M34 – 54 x 54 x ¾” BSP (M) SM3230 316L254MA2 – 54 x 54 x 1 ½” SM3230 316L254M20 – 54 x 54 x 2” SM3230 316L266M34 – 66.7 x 66.7 x ¾” SM3230 316L266M20 – 66.7 x 66.7 x 2” C X C X FI TEE SM3231 316L215F12 – 15 x 15 x ½” BSP (F) SM3231 316L218F12 – 18 x 18 x ½” BSP (F) SM3231 316L218F34 – 18 x 18 x ¾” BSP (F) SM3231 316L222F12 – 22 x 22 x ½” BSP (F) SM3231 316L222F34 – 22 x 22 x ¾” BSP (F) SM3231 316L228F12 – 28 x 28 x ½” BSP (F) SM3231 316L228F34 – 28 x 28 x ¾” BSP (F) SM3231 316L228F10 – 28 x 28 x 1” BSP (F) SM3231 316L235F12 – 35 x 35 x ½” BSP (F) SM3231 316L235F34 – 35 x 35 x ¾” BSP (F) SM3231 316L242F12 – 42 x 42 x ½” BSP (F) SM3231 316L242F34 – 42 x 42 x ¾” BSP (F) SM3231 316L254F12 – 54 x 54 x ½” BSP (F) SM3231 316L254F34 – 54 x 54 x ¾” BSP (F) SM3231 316L254F20 – 54 x 54 x 2” BSP (F) SM3231 316L266F34 – 66.7 x 66.7 x ¾” BSP (F) SM3231 316L266F20 – 66.7 x 66.7 x 2” BSP (F) SM3231 316L276F34 – 76.1 x 76.1 x ¾” BSP (F) SM3231 316L276F20 – 76.1 x 76.1 x 2” BSP (F) SM3231 316L288F34 – 88.9 x 88.9 x ¾” BSP (F) SM3231 316L288F20 – 88.9 x 88.9 x 2” BSP (F) SM3231 316L2X8F34 – 108 x 108 x ¾” BSP (F) SM3231 316L2X8F20 – 108 x 108 x 2” BSP (F) C X MI 90D ELBOW SM3190 316L015M12 – 15 x ½” BSP (M) SM3190 316L015M34 – 15 x ¾” BSP (M) SM3190 316L018M12 – 18 x ½” BSP (M) SM3190 316L022M12 – 22 x ½” BSP (M) SM3190 316L022M34 – 22 x ¾” BSP (M) SM3190 316L022M10 – 22 x 1” BSP (M) SM3190 316L028M34 – 28 x ¾” BSP (M) SM3190 316L028M10 – 28 x 1” BSP (M) SM3190 316L035M10 – 35 x 1” BSP (M) SM3190 316L035MA4 – 35 x 1 ¼” BSP (M) SM3190 316L042MA2 – 42 x 1 ½” BSP (M) SM3190 316L054MA2 – 54 x 1 ½” BSP (M) SM3190 316L054M20 – 54 x 2” BSP (M) SM3190 316L066M20 – 66.7 x 2” BSP (M) SM3190 316L076MA2 – 76.1 x 76.1 x 2 ½” BSP (M) SM3190 316L088M30 – 88.9 x 88.9 x 3” BSP (M) C X FI 90D ELBOW SM3191 316L015F12 – 15 x ½” BSP (F) SM3191 316L018F12 – 18 x ½” BSP (F) SM3191 316L022F34 – 22 x ¾” BSP (F) SM3191 316L028F10 – 28 x 1” BSP (F) SM3191 316L035FA4 – 35 x 1 ¼” BSP (F) SM3191 316L042FA2 – 42 x 1 ½” BSP (F) SM3191 316L054F20 – 54 x 2” BSP (F) SM3191 316L066F20 – 66.7 x 2” BSP (F) C X MI 90D SHORT ELBOW SM3290 316L015M12 – 15 x ½” BSP (M) SM3290 316L018M12 – 18 x ½” BSP (M) SM3290 316L022M34 – 22 x ¾” BSP (M) SM3290 316L028M10 – 28 x 1” BSP (M) SM3290 316L035MA4 – 35 x 1 ¼” BSP (M) SM3290 316L042MA2 – 42 x 1 ½” BSP (M) SM3290 316L054M20 – 54 x 2” BSP (M) C X FI 90D SHORT ELBOW SM3291 316L015F12 – 15 x ½” BSP (F) SM3291 316L018F12 – 18 x ½” BSP (F) SM3291 316L022F12 – 22 x ½” BSP (F) SM3291 316L022F34 – 22 x ¾” BSP (F) SM3291 316L028F10 – 28 x 1” BSP (F) SM3291 316L035FA4 – 35 x 1 ¼” BSP (F) CXFI 90D WALLPLATE ELBOW SM3390 316L015F12 – 15 x ½” BSP (F) SM3390 316L018F12 – 18 x ½” BSP (F) SM3390 316L022F34 – 22 x ¾” BSP (F) SM3390 316L028F10 – 28 x 1” BSP (F) SM3390 316L035FA4 – 35 x 1 ¼” BSP (F)

Approval Holder:

Linhai Yongsheng Pipe Co., Ltd

Company Name

Linhai Yongsheng Pipe Co., Ltd

Address

NO 7-270 FENXI VILLAGE DUQIAO LINHAI

Country

Zhejiang

Phone

0086-576-85528969

View All Listings by this Company

Manufacturer:

Linhai Yongsheng Pipe Co., Ltd

Company Name

Linhai Yongsheng Pipe Co., Ltd

Address

NO 7-270 FENXI VILLAGE DUQIAO LINHAI

Country

Zhejiang

Phone

0086-576-85528969

View All Listings by this Company

Range of plastic push-fit fittings (available in black, white and grey) and a manifold (available in grey only) with EPDM or NBR ‘O’-rings. For use with copper pipe (manufactured to EN1057), PE-X pipe (manufactured to BS7291-3:2010) & PB pipe (BS EN 21003-2:2008). Maximum working pressure: 12.5 bar @ 20°C (Cold water use only). From September 2023 the products are suitable for 8.0 bar @ 65°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303062

Size:

See models.

Marking:

JG logo and size moulded on the collet or body of fitting.

Installation Requirements:

R001 R008

Expiry date:

31/03/2028

Model:

GREY ACETAL FITTINGS COOLING MANIFOLD: NC2183 15mm x 3/8”. METRIC TO IMPERIAL ADAPTORS STRAIGHT CONNECTOR: NC462 15mm x ½”. UNEQUAL STRAIGHT CONNECTOR: NC2511 15mm x 3/8”. STEM TO TUBE ADAPTOR: NC2164 15mm x 3/8”, NC2173 15mm x ½”. STEM TO HOSE CONNECTOR: NC932 15mm x ½”. TUBE TO HOSE CONNECTOR: NC448 15mm x ½”, NC737 22mm x ½”, NC473 22mm x ¾”. ADAPTOR TEE: NC869 15mm x 15mm x 3/8”. STEM TO STEM ADAPTOR: NC478 15mm x 3/8”. ACETAL CM FITTINGS WITH EPDM O-RINGS FEMALE ADAPTOR WITH BSP THREAD: CM451513FS 15mm x 3/8”. TAP ADAPTOR WITH UNS THREAD: CM3210U7E 10mm x 7/16”. TAP ADAPTOR BSP THREAD: CM321014E 10mm x ½” BSP (F), CM3201S 15mm x ½” BSP (F). TAP ADAPTOR FLAT END BSP THREAD: CM321014FE 10mm x ½” BSP (F). TWO-WAY DIVIDER: CM2315W 15mm. STRAIGHT ADAPTOR BSP THREAD: CM011514S 15mm x ½” (M), CM011216S 22mm x ¾” (M). REDUCING STRAIGHT CONNECTOR: CM201510S 15mm x 10mm, CM201512W 15mm x 12mm. REDUCING ELBOW CONNECTOR: CM211210W 12mm x 10mm. SLIP CONNECTOR: CM-SC-15-S 15mm. STEM ELBOW: CM221515W 15mm x 15mm. BLACK ACETAL FITTINGS (METRIC SIZES) STRAIGHT ADAPTORS BSP THREAD: PM011012E 10mm x ¼” BSP (M), PM011013E 10mm x 3/8” BSP (M), PM011014E 10mm x ½” BSP (M), PM011513E 15mm x 3/8” BSP (M), PM011514E 15mm x ½” BSP (M), PM011516E 15mm x ¾” BSP (M), PM012216E 22mm x ¾” BSP (M). STRAIGHT ADAPTERS BSPT THREAD: PM011002E 10mm x ¼” BSPT (M), PM011003E 10mm x 3/8” BSPT (M), PM011004E 10mm x ½” BSPT (M). EQUAL STRAIGHT CONNECTORS: PM0410E 10mm, PM0415E 15mm, PM0422E 22mm. REDUCING STRAIGHT CONNECTORS: PM201004E 10mm x 4mm, PM201006E 10mm x 6mm, PM201008E 10mm x 8mm, PM201210E 12mm x 10mm. EQUAL ELBOW: PM0310E 10mm, PM0315E 15mm, PM0322E 22mm. REDUCING ELBOW CONNECTOR: PM211004E 10mm x 4mm, PM211006E 10mm x 6mm, PM211008E 10mm x 8mm, PM211210E 12mm x 10mm. STEM ELBOW: PM221010E 10mm x 10mm, PM221515E 15mm x 15mm, PM222222E 22mm x 22mm. SWIVEL ELBOW BSP THREAD: PM091012E 10mm x ¼”, PM091013E 10mm x 3/8”, PM091014E 10mm x ½”. SWIVEL ELBOW BSPT THREAD: PM091002E 10mm x ¼”, PM091003E 10mm x 3/8”, PM091004E 10mm x ½”. EQUAL TEE: PM0210E 10MM, PM0215E 15mm, PM0222E 22mm. REDUCING TEE: PM3022AE 22mm x 22mm x 15mm. SWIVEL TEE CENTRE LEG BSP THREAD: PM101012E 10mm x ¼”, PM101013E 10mm x 3/8”, PM101014E 10mm x ½”. SWIVEL TEE CENTRE LEG BSPT THREAD: PM101002E 10mm x ¼“, PM101003E 10mm x 3/8“, PM101004E 10mm x ½“. SWIVEL MALE RUN TEE BSP THREAD: PM111012E 10mm x ¼”, PM111013E 10mm x 3/8”, PM111014E 10mm x ½”. SWIVEL MALE RUN TEE BSPT THREAD: PM111002E 10mm x ¼“, PM111003E 10mm x 3/8“, PM111004E 10mm x ½“. BULKHEAD CONNECTOR: PM1210E 10mm, REDUCER: PM061210E 12mm x 10mm, PM061510E 15mm x 10mm, PM061512E 15mm x 12mm, PM061815E 18mm x 15mm, PM062215E 22mm x 15mm, PM062218E 22mm x 18mm. STEM ADAPTOR BSP THREAD: PM051012E 10mm x ¼” BSP (M), PM051013E 10mm x 3/8” BSP (M), PM051014E 10mm x ½” BSP (M), PM051513E 15mm x 3/8” BSP (M), PM051514E 15mm x ½” BSP (M), PM052214E 22mm x ½” BSP (M), PM052216E 22mm x ¾ ” BSP (M). STEM ADAPTOR BSPT THREAD: PM051002E 10mm x ¼” BSPT (M), PM051003E 10mm x 3/8” BSPT (M), PM051004E 10mm x ½” BSPT (M). TWO WAY DIVIDER: PM2310E 10mm, PM2315E 15mm. PLUG (RED & BLACK): PM0810R 10MM RED, PM0815E 15MM BLACK, PM0822E 22MM BLACK. END STOP: PM4615E 15mm, PM4622E 22mm. FEMALES ADAPTOR BSP THREAD: PM451015FE 10mm x 5/8”. U-BEND: PMUB15E 15mm. BACK PLATE ELBOW: 15PWB 15mm x ½” BSP. WHITE ACETAL FITTINGS BULKHEAD ELBOW: CM551516W 15mm x ¾” BSP.

Approval Holder:

Reliance Worldwide Corporation (UK) Ltd.

Company Name

Reliance Worldwide Corporation (UK) Ltd.

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 (0)1895 449233

View All Listings by this Company

Manufacturer:

Reliance Worldwide Corporation (UK) Ltd.

Company Name

Reliance Worldwide Corporation (UK) Ltd.

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 (0)1895 449233

View All Listings by this Company

Range of compression fittings with brass bodies for use with copper pipe (EN1057). Above ground use only. Maximum working pressure 16 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2305343

Size:

see model

Marking:

EN1254-2 & size on nut. HonSon logo (ISI) on fitting body

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

HS100-001 Equal Straight: HS100-001-01 8×8, HS100-001-02 10×10, HS100-001-03 12×12, HS100-001-04 14×14, HS100-001-05 15×15, HS100-001-06 16×16, HS100-001-07 18×18, HS100-001-08 22×22, HS100-001-09 28×28, HS100-001-13 15×15 (82mm length), HS100-001-14 22×22 (82mm length). HS100-002 Reducing Straight: HS100-002-01 10×8, HS100-002-02 12×8, HS100-002-03 12×10, HS100-002-04 15×8, HS100-002-05 15×10, HS100-002-06 15×12, HS100-002-07 18×15, HS100-002-08 22×15, HS100-002-09 22×18, HS100-002-10 28×15, HS100-002-11 28×22. HS100-003 Female Straight: HS100-003-01 8×1/4" F, HS100-003-02 8×3/8" F, HS100-003-03 10×1/4" F, HS100-003-04 10×3/8" F, HS100-003-05 10×1/2" F, HS100-003-06 12×3/8" F, HS100-003-07 12×1/2" F, HS100-003-08 14×3/8" F, HS100-003-09 14×1/2" F, HS100-003-10 15×1/4" F, HS100-003-11 15×3/8" F, HS100-003-12 15×1/2" F, HS100-003-13 15×3/4" F, HS100-003-14 15×1" F, HS100-003-15 16×1/2"F, HS100-003-16 16×3/4" F, HS100-003-17 18×1/2" F, HS100-003-18 18×3/4" F, HS100-003-19 22×1/2" F, HS100-003-20 22×3/4" F, HS100-003-21 22×1" F, HS100-003-22 28×3/4" F, HS100-003-23 28×1" F. HS100-004 Male Straight: HS100-004-01 8×1/8"M, HS100-004-02 8×1/4"M, HS100-004-03 8×3/8"M, HS100-004-04 8×1/2"M, HS100-004-05 10×1/4"M, HS100-004-06 10×3/8"M, HS100-004-07 10×1/2"M, HS100-004-08 12×3/8"M, HS100-004-09 12×1/2"M, HS100-004-10 14×3/8"M, HS100-004-11 14×1/2"M, HS100-004-12 14×3/4"M, HS100-004-13 15×1/4"M, HS100-004-14 15×3/8"M, HS100-004-15 15×1/2"M, HS100-004-16 15×3/4"M, HS100-004-17 16×1/2"M, HS100-004-18 16×3/4"M, HS100-004-19 18×1/2"M, HS100-004-20 18×3/4"M, HS100-004-21 22×1/2"M, HS100-004-22 22×3/4"M, HS100-004-23 22×1"M, HS100-004-24 22×1 1/4"M, HS100-004-25 28×3/4"M, HS100-004-26 28×1"M. HS100-005 Equal Elbow HS100-005-01 8×8, HS100-005-02 10×10, HS100-005-03 12×12, HS100-005-04 14×14, HS100-005-05 15×15, HS100-005-06 16×16, HS100-005-07 18×18, HS100-005-09 22×22, HS100-005-11 28×28. HS100-006 Female Elbow: HS100-006-01 8×1/4"F, HS100-006-02 10×3/8"F, HS100-006-03 12×1/2"F, HS100-006-04 14×1/2"F, HS100-006-05 15×1/2"F, HS100-006-06 15×3/4"F, HS100-006-07 16×1/2"F, HS100-006-08 18×1/2"F, HS100-006-09 18×3/4"F, HS100-006-10 22×1/2"F, HS100-006-11 22×3/4"F, HS100-006-12 22×1"F, HS100-006-13 28×1"F. HS100-007 Male Elbow: HS100-007-01 8×1/4"M, HS100-007-02 10×1/4"M, HS100-007-03 10×3/8"M, HS100-007-04 12×1/2"M, HS100-007-05 14×1/2"M, HS100-007-06 15×1/4"M, HS100-007-07 15×3/8"M, HS100-007-08 15×1/2"M, HS100-007-09 15×3/4"M, HS100-007-10 16×1/2"M, HS100-007-11 18×1/2"M, HS100-007-12 18×3/4"M, HS100-007-13 22×1/2"M, HS100-007-14 22×3/4"M, HS100-007-15 22×1"M, HS100-007-16 28×1"M. HS100-008 Equal Tee: HS100-008-01 8×8×8, HS100-008-02 10×10×10, HS100-008-03 12×12×12, HS100-008-04 14×14×14, HS100-008-05 15×15×15, HS100-008-06 16×16×16, HS100-008-07 18×18×18, HS100-008-08 22×22×22, HS100-008-09 28×28×28. HS100-009 Reducing Tee: HS100-009-01 15×15×22, HS100-009-02 18×18×15, HS100-009-03 18×15×18, HS100-009-04 22×15×15, HS100-009-05 22×15×22, HS100-009-06 22×22×15, HS100-009-07 22×22×18, HS100-009-08 28×22×15, HS100-009-09 28×28×15, HS100-009-10 28×15×28, HS100-009-11 28×22×22, HS100-009-12 28×28×22, HS100-009-13 28×22×28. HS100-010 Female Tee: HS100-010-01 12×1/2“F, HS100-010-03 15×1/2“F, HS100-010-05 18×1/2“F, HS100-010-06 18×3/4“F, HS100-010-07 22×1/2”F, HS100-010-08 22×3/4”F, HS100-010-09 28×1/2”F, HS100-010-10 28×3/4”F, HS100-010-11 28×1”F. HS100-011 Wallplate Elbow: HS100-011-01 12×1/2"F, HS100-011-02 14×1/2"F, HS100-011-03 15×1/2"F, HS100-011-05 18×1/2"F, HS100-011-06 18×3/4"F, HS100-011-07 22×1/2"F, HS100-011-08 22×3/4"F. HS100-012 Water Tank Connector : HS100-012-01 15, HS100-012-02 22, HS100-012-03 28. HS100-013 Stop End: HS100-013-01 8, HS100-013-02 10, HS100-013-03 12, HS100-013-04 15, HS100-013-05 18, HS100-013-06 22, HS100-013-07 28. HS100-014 Str Tap Connector: HS100-014-01 15×1/2"F, HS100-014-02 15×3/4"F, HS100-014-03 22×3/4"F. HS100-015 Bent Tap Connector: HS100-015-01 15×1/2"F, HS100-015-02 22×3/4"F. HS100-016 Crossover Bridge: HS100-016-01 15×15, HS100-016-02 18×18, HS100-016-03 22×22. HS100-017 Reduced Riece: HS100-017-01 15×8, HS100-017-02 15×10, HS100-017-03 22×15, HS100-017-04 28×15, HS100-017-05 28×22. HS100-018 3 Part Reduced Set: HS100-018-01 10×8, HS100-018-02 12×8, HS100-018-03 15×8, HS100-018-04 15×10, HS100-018-05 15×12, HS100-018-06 22×15, HS100-018-07 28×15, HS100-018-08 28×22. HS100-019 Water Tank Connector: HS100-019-01 15×1/2"M, HS100-019-02 22×3/4"M, HS100-019-03 28×1"M. HS100-020 45 Degree Elbow: HS100-020-01 15×15, HS100-020-02 22×22, HS100-020-03 28×28.

Approval Holder:

Wenling Honson Brassware Co Ltd

Company Name

Wenling Honson Brassware Co Ltd

Address

Yingtian Industrial Zone, Cheng-nan Town, Wenling City

Country

Zhejiang Province,

View All Listings by this Company

Manufacturer:

Wenling Honson Brassware Co Ltd

Company Name

Wenling Honson Brassware Co Ltd

Address

Yingtian Industrial Zone, Cheng-nan Town, Wenling City

Country

Zhejiang Province,

View All Listings by this Company

Range of “Effast” ABS fittings for use with ABS pipe complying with BS EN 5391-2006. Maximum working pressure: 15 Bar. Maximum operating temperature: 23°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2306055

Size:

20, 25, 32, 40, 50, 63, 75, 90 OR 110mm solvent weld (SW) connection (Model codes with XXXX is replaced with 0200 for 20mm, or 1100 for 110mm SW etc.) ½”, ¾”, 1”, 1.1/4”, 1.1/2”, 2”, 3” or 4” BSP (M) or (F) connections. (Model codes with a Y on the end is replaced with B for ½”, C for ¾”, D for 1”, E for 1.1/4”, F for 1.1/2”, G for 2”, H for 3” and I for 4” BSP).

Marking:

Effast and size on body.

Installation Requirements:

R001

Expiry date:

30/06/2028

Model:

RAAGOAXXXX - Elbow 90° BS (20-110 SW), RAAGYAXXXX - Elbow 45° BS (20-110 SW), RAAMAAXXXX - Socket BS (20-110 SW), RAATIAXXXX - tee 90° BS (20-110 SW), RAACAAXXXX - Cap BS (25-110 SW), RAACUAXXXX - Bend 90° (25-110 SW,) RAABOAXXXX - Union BS (20-110 SW), RAAQRAXXXX - Serrated Face Stub Flange (32-110 SW), RAAFNAXXXX - Fixed Flange ISO (20-110 SW), RAAFFAXXXX - Fixed Flange BS (50-110 SW), RAAFCAXXXX - Blanking Flange ISO (63-110 SW), RAARCAXXXB - Reducing Bush BS (25-32 SW), RAARCAXXXC - Reducing Bush BS (32 SW), RAARCAXXXD - Reducing Bush BS (40-63 SW), RAARCAXXXE - Reducing Bush BS (50-63 SW), RAARCAXXXF - Reducing Bush BS (63-90 SW), RAARCAXXXG - Reducing Bush BS (75-110 SW), RAARCAXXXH - Reducing Bush BS (90 SW), RAARCAXXXI - Reducing Bush BS (110 SW), RAARCAXXXL - Reducing Bush BS (140-160 SW), RCAGOCXXXY - Elbow 90° BS/BSPP (20-110 SW x ½” to 4” BSP (F)), RCATICXXXY - Tee 90° BS/BSPP (20-110 SW (x2) x ½” to 4” BSP (F)), RCAMACXXXY - Socket BS/BSPP (20-110 SW x ½” to 4” BSP (F)), RCAAFCXXXY - Female Adaptor BS/BSPP (20-63 SW x ½” to 2” BSP (F)), RCAAMCXXXY - Male Adaptor BS/PSBB (20-110 SW x ½” to 4” BSP (M)), RCARCCXXXY - Reducing Bush BS/BSPP (20-32 SW x ½” to 1” BSP (F)),

Approval Holder:

Polypipe Italia s.r.l.

Company Name

Polypipe Italia s.r.l.

Address

Localita Pianmercato, 5c/d/h 16044 Cicagna (GE)

Country

Italy

View All Listings by this Company

Manufacturer:

Polypipe Italia s.r.l.

Company Name

Polypipe Italia s.r.l.

Address

Localita Pianmercato, 5c/d/h 16044 Cicagna (GE)

Country

Italy

View All Listings by this Company

Range of DZR brass push fit fittings for use with copper pipe (manufactured to BS EN 1057), PB pipe (manufactured to BS7291-2) and PEX pipe (manufactured to BS7291-3). Maximum working pressures and operating temperatures: 12.5 @ 20°C, and 3.0 bar @ 92ºC.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2307024

Size:

See model.

Marking:

John Guest logo (“JG”) (brand of Reliance Worldwide Corporation (UK) Ltd.) and CR on body.

Installation Requirements:

R001

Expiry date:

31/07/2028

Model:

Straight Adaptors: MW011504N: 15mm x ½” BSPT (M), MW012206N: 22mm x ¾” BSPT (M), MW012808N: 28mm x 1” BSPT (M), MW012818N: 28mm x 1” BSP (M). Male Couplers: 10MC(1/2): 10mm x ½” BSP (M), 15MC(1/2): 15mm x ½” BSP (M), 15MC(1/2)P: 15mm x ½” BSP (M), 22MC(3/4): 22mm x ¾” BSP (M), 22MC(3/4)P: 22mm x ¾” BSP (M). Female Adaptors: MW451514N: 15mm x ½” BSP (F), MW452216N: 22mm x ¾” BSP (F), 22CFA: 22mm x 1” BSP (F), 22CFAP: 22mm x 1” BSP (F). Back Plate Elbows: 15WB: 15mm x ½” BSP (F), 15WBP: 15mm x ½” BSP (F), 15WB2: 15mm x ½” BSP (F), 22WB: 22mm x ¾” BSP (F). Stem Adaptors: MW051504N: 15mm x ½” BSPT (M), MW052206N: 22mm x ¾” BSPT (M), MW052818N: 28mm x 1" BSP (M), MW501514N: 15mm x ½” BSP (F), MW502216N: 22mm x ¾” BSP (F). Male Adaptors: 22CMA: 22mm x 1” BSP (M), 22CMAP: 22mm x 1” BSP (M).

Approval Holder:

Reliance Worldwide Corporation (UK) Ltd.

Company Name

Reliance Worldwide Corporation (UK) Ltd.

Address

Horton Road West Drayton Middlesex

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 (0)1895 449233

View All Listings by this Company

Range of press fittings with a stainless steel body and EPDM ‘O’ rings for use with stainless steel 316L pipe manufactured to EN10312. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101368

Size:

see model

Marking:

Ducco and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Equal Coupling DS2001-15 15mm Equal Coupling DS2001-18 18mm Equal Coupling DS2001-22 22mm Equal Coupling DS2001-28 28mm Equal Coupling DS2001-35 35mm Equal Coupling DS2001-42 42mm Equal Coupling DS2001-54 54mm Adjustable Coupling DS2002-15 15mm Adjustable Coupling DS2002-18 18mm Adjustable Coupling DS2002-22 22mm Adjustable Coupling DS2002-28 28mm Adjustable Coupling DS2002-35 35mm Adjustable Coupling DS2002-42 42mm Adjustable Coupling DS2002-54 54mm 90D Equal Elbow DS2003-15 15mm 90D Equal Elbow DS2003-18 18mm 90D Equal Elbow DS2003-22 22mm 90D Equal Elbow DS2003-28 28mm 90D Equal Elbow DS2003-35 35mm 90D Equal Elbow DS2003-42 42mm 90D Equal Elbow DS2003-54 54mm 90D Plain Elbow-B DS2004-15 15mm 90D Plain Elbow-B DS2004-18 18mm 90D Plain Elbow-B DS2004-22 22mm 90D Plain Elbow-B DS2004-28 28mm 90D Plain Elbow-B DS2004-35 35mm 90D Plain Elbow-B DS2004-42 42mm 90D Plain Elbow-B DS2004-54 54mm 45D Equal Elbow DS2005-15 15mm 45D Equal Elbow DS2005-18 18mm 45D Equal Elbow DS2005-22 22mm 45D Equal Elbow DS2005-28 28mm 45D Equal Elbow DS2005-35 35mm 45D Equal Elbow DS2005-42 42mm 45D Equal Elbow DS2005-54 54mm 45D Plain Elbow-B DS2006-15 15mm 45D Plain Elbow-B DS2006-18 18mm 45D Plain Elbow-B DS2006-22 22mm 45D Plain Elbow-B DS2006-28 28mm 45D Plain Elbow-B DS2006-35 35mm 45D Plain Elbow-B DS2006-42 42mm 45D Plain Elbow-B DS2006-54 54mm Equal Tee DS2007-15 15mm Equal Tee DS2007-18 18mm Equal Tee DS2007-22 22mm Equal Tee DS2007-28 28mm Equal Tee DS2007-35 35mm Equal Tee DS2007-42 42mm Equal Tee DS2007-54 54mm Reducing Tee DS2008-18*15 18mmx15mm Reducing Tee DS2008-22*15 22mmx15mm Reducing Tee DS2008-22*18 22mmx18mm Reducing Tee DS2008-28*22 28mmx22mm Reducing Tee DS2008-35*22 35mmx22mm Reducing Tee DS2008-35*28 35mmx28mm Reducing Tee DS2008-42*28 42mmx28mm Reducing Tee DS2008-42*35 42mmx35mm Reducing Tee DS2008-54*28 54mmx28mm Reducing Tee DS2008-54*35 54mmx35mm Reducing Tee DS2008-54*42 54mmx42mm Female Coupling DS2009-15*Rp1/2 15mmxRp1/2" Female Coupling DS2009-22*Rp3/4 22mmxRp3/4" Female Coupling DS2009-28*Rp1 28mmxRp1" Female Coupling DS2009-35*Rp1 1/4 35mmxRp1-1/4" Female Coupling DS2009-42*Rp1 1/2 42mmxRp1-1/2" Female Coupling DS2009-54*Rp2 54mmxRp2" Rotatable Coupling DS2010-15*G1/2 15mmxG1/2" Rotatable Coupling DS2010-22*G3/4 22mmxG3/4" Rotatable Coupling DS2010-28*G1 28mmxG1" Rotatable Coupling DS2010-35*G1 1/4 35mmxG1-1/4" Item Description Secondary Code Size (OD) Rotatable Coupling DS2010-42*G1 1/2 42mmxG1-1/2" Rotatable Coupling DS2010-54*G2 54mmxG2" Male Coupling DS2011-15*R1/2 15mmxR1/2" Male Coupling DS2011-22*R3/4 22mmxR3/4" Male Coupling DS2011-28*R1 28mmxR1" Male Coupling DS2011-35*R1 1/4 35mmxR1-1/4" Male Coupling DS2011-42*R1 1/2 42mmxR1-1/2" Male Coupling DS2011-54*R2 54mmxR2" Female Elbow DS2012-15*Rp1/2 15mmxRp1/2" Female Elbow DS2012-22*Rp3/4 22mmxRp3/4" Female Elbow DS2012-28*Rp1 28mmxRp1" Female Elbow DS2012-35*Rp1 1/4 35mmxRp1-1/4" Female Elbow DS2012-42*Rp1 1/2 42mmxRp1-1/2" Female Elbow DS2012-54*Rp2 54mmxRp2" Male Elbow DS2013-15*R1/2 15mmxR1/2" Male Elbow DS2013-22*R3/4 22mmxR3/4" Male Elbow DS2013-28*R1 28mmxR1" Male Elbow DS2013-35*R1 1/4 35mmxR1-1/4" Male Elbow DS2013-42*R1 1/2 42mmxR1-1/2" Male Elbow DS2013-54*R2 54mmxR2" Female Tee DS2014-15*Rp1/2 15mmxRp1/2" Female Tee DS2014-22*Rp3/4 22mmxRp3/4" Female Tee DS2014-28*Rp1 28mmxRp1" Female Tee DS2014-35*Rp1 1/4 35mmxRp1-1/4" Female Tee DS2014-42*Rp1 1/2 42mmxRp1-1/2" Female Tee DS2014-54*Rp2 54mmxRp2" Male Tee DS2015-15*R1/2 15mmxR1/2" Male Tee DS2015-22*R3/4 22mmxR3/4" Male Tee DS2015-28*R1 28mmxR1" Male Tee DS2015-35*R1 1/4 35mmxR1-1/4" Male Tee DS2015-42*R1 1/2 42mmxR1-1/2" Male Tee DS2015-54*R2 54mmxR2" Reducer-A DS2016-18*15 18mmx15mm Reducer-A DS2016-22*18 22mmx18mm Reducer-A DS2016-28*22 28mmx22mm Reducer-A DS2016-35*28 35mmx28mm Reducer-A DS2016-42*35 42mmx35mm Reducer-A DS2016-54*42 54mmx42mm Reducer Coupling-B DS20107-18*15 18mmx15mm Reducer Coupling-B DS20107-22*18 22mmx18mm Reducer Coupling-B DS20107-28*22 28mmx22mm Reducer Coupling-B DS20107-35*28 35mmx28mm Reducer Coupling-B DS20107-42*35 42mmx35mm Reducer Coupling-B DS20107-54*42 54mmx42mm

Approval Holder:

Gentler Industrial co., Ltd

Company Name

Gentler Industrial co., Ltd

Address

1F no 986

View All Listings by this Company