Water Regulations Approval Scheme Ltd

Combination Tap Assemblies

Section Code 0470 : Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Back To Directory Sections

WRAS Approval Number: #2111388

Single hole, single outlet (swivel) combination tap assembly with brass body (chrome plated), incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. The cold water inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2111388
Size:: Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connection.
Marking:: Buster & Punch London on body
Installation Requirements:: R001 R006 R010
Expiry date:: 30/11/2026
Model:: RKT071572, RKT351575, RKT051573, RKT481574, RKT071568, RKT351571, RKT051569 & RKT481570 COMBINATION TAP ASSEMBLIES

Approval Holder:: Buster and Punch Ltd

Company Name
Buster and Punch Ltd
Address
29 St. Peters Street Stamford
Postcode
PE9 2PF

View All Listings by this Company

WRAS Approval Number: #2207317

Range of single hole, single outlet (swivel) combination tap assemblies (with various finishes). Incorporating a ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5 bar. Maximum operating temperature 60°C

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2207317
Size:: Stainless steel braided PEX lined hose assembly incorporating ½” BSP (F) captive nut end connections.
Marking:: Deva, DTC53 on body.
Installation Requirements:: R001 R006 R010
Expiry date:: 31/07/2027
Model:: CALDEW SINK MIXERS CDW104CP, CDW104BN, CDW104CO, CDW104BK. ASHWORTH SINK MIXERS ASH104, ASH104BC, ASH104BK, ASH104BB, ASH104CO.

Approval Holder:: Methven UK Limited

Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

WRAS Approval Number: #2303800

Range of single hole, single outlet (swivel) combination tap assemblies (chrome plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlets incorporate plastic flow straighteners. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2303800
Size:: Stainless steel braided PEX lined hose assembly incorporating ½” BSP (F) captive nut end connections. Model TAUR130: 15mm copper tails.
Marking:: Deva on front of body. DTC34 on rear of body.
Installation Requirements:: R001 R006 R010
Expiry date:: 31/03/2028
Model:: MET172, MET172/BC, TAUR130.

Approval Holder:: Methven UK Limited

Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

WRAS Approval Number: #2205364

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (chromium or matt black finish), incorporating a ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2205364
Size:: Stainless steel braided PEX lined flexible hose assembly incorporating ½” BSP captive nut end connections.
Marking:: Cooke & Lewis & date of manufacture MM/DD/YY on body
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 31/05/2027
Model:: 3663602930174 & 3663602930334

Product Images

Approval Holder:: Kingfisher International Products Ltd.

Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

WRAS Approval Number: #2210019

Range of single hole, metal, single outlet (swivel) combination tap assemblies (chromium plated or brushed brass) incorporating a ceramic cartridge or ceramic discs headwork with either single lever or cross top. The spout outlets incorporate a plastic aerator. The cold inlet incorporates an optional check valve cartridge (excluding model HS605) which has been verified by test as suitable for backflow protection against Fluid Category 2. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 0470 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2210019
Size:: Stainless-steel braided EPDM lined flexible hose assemblies with ½” BSP captive nuts. Products are supplied with optional ½” BSP female x ½” BSP male check valve adapter (excluding model HS605).
Marking:: Acrysil logo on rear of spout.
Installation Requirements:: R001 R006 R010
Expiry date:: 31/10/2027
Model:: Ceramic Disc Models: HS175* HS305* HS935* HS945* HS955* HS975* Ceramic Cartridge Models: HS195* HS405* HS605* HS1075* * denotes finish and is replaced by either C (chrome) or B (brushed).

Product Images

Approval Holder:: Acrysil Products Ltd.

Company Name
Acrysil Products Ltd.
Address
Crossley Road Buxton Road Congleton
Postcode
CW12 2PN

View All Listings by this Company