TEST SITE

Miscellaneous Fittings

Section Code 1530 :

Back To Directory Sections

#2011908

Stainless steel bodied sensor with EPDM ‘O’-ring. Maximum operating temperature 90°C.

Section:
1530 Miscellaneous Fittings
Size:
½” BSP (M)
Marking:
Grundfos and Grundfos logo, part no. (P/N) and serial no. (S/N) on body.
Installation Requirements:
R001
Expiry date:
30/11/2025
Model:
VTU (model code: 99470445), Model added July 2022: VTU (model code: 92556499).
Product Images

Approval Holder:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Country
Denmark
Phone
+45 24610542

View All Listings by this Company

Print This Approval


#2012341

Range of flow sensors with brass bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 90°C

Section:
1530 Miscellaneous Fittings
Size:
¾” BSP (M).
Marking:
Sika, part number and other information on adhesive label on cable. Flow arrow on body
Installation Requirements:
R001
Expiry date:
31/12/2025
Model:
Flow sensors type series VTY15 Models: VY1545abcdefgh ab:for body material (MA = Brass CW617N-DW, MK = Brass CW724R, K5 = without body, only the internal turbine system) cd: for sensor and signal output (HN = Hall sensor-NPN, 00 = without sensor) ef: for electrical cable connection (various - in combination can be 00…99 or AA…ZZ, examples 05 = 500mm, 12=1200mm, X1=80mm with Molex plug connector) gh: for process connection (A4 = G3/4 male thread, YY = without, only possible with ab = K5) VY1545abyyyyyzz ab: for body material (MA = Brass CW617N-DW, MK = Brass CW724R, K5 = without body, only the internal turbine system) yyyyy: for name of customer (5 digits, e.g. SCHMI, MUELL, …) zz: for consecutive number (2 digits, 01…99)
Product Images

Approval Holder:
SIKA Systemtechnik GmbH
Company Name
SIKA Systemtechnik GmbH
Address
Struthweg 7-9, D 34260 Kaufungen
Country
Germany
Phone
+ 49 5605 803 650

View All Listings by this Company
Manufacturer:
SIKA Systemtechnik GmbH
Company Name
SIKA Systemtechnik GmbH
Address
Struthweg 7-9, D 34260 Kaufungen
Country
Germany
Phone
+ 49 5605 803 650

View All Listings by this Company

Print This Approval


#2006361

Range of wall mounted shower arms and shower handsets with brass bodies (various finishes), the inlets to the shower handsets incorporating a flow restrictor. Maximum operating temperature 60°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2006361
Size:
½” BSP (M)
Marking:
Crosswater logo (X) on body of shower handset.
Installation Requirements:
R001 R040
Expiry date:
30/06/2025
Model:
PRI963NC (chrome plated) PRI963NUB (unlaquered brass)

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Phone
0845 873 8840

View All Listings by this Company
Manufacturer:
A.G.Monteiro.
Company Name
A.G.Monteiro.
Address
Parque Industrial de Adaufe Lote H5A e H5B 4710-571 Braga
Country
Portugal

View All Listings by this Company

Print This Approval


#2012358

Thermostatic element with copper shell, polyethylene tube and PTFE gasket. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2012358
Size:
2.54Ø
Marking:
SMLG (trademark of Shanghai Enjoy Bath Thermostatic Technology Co. Ltd.), batch number and model on copper shell.
Installation Requirements:
R001
Expiry date:
31/12/2025
Model:
LG075X
Product Images

Approval Holder:
Shanghai Enjoy Bath Thermostatic Technology Co. Ltd (SMLG)
Company Name
Shanghai Enjoy Bath Thermostatic Technology Co. Ltd (SMLG)
Address
F-202 Building 5 No.84 Jinwen Road Zhuqiao Town
Phone
+86-21-50321360
General Email
markyu@smlgood.com

View All Listings by this Company
Manufacturer:
Shanghai Enjoy Bath Thermostatic Technology Co. Ltd (SMLG)
Company Name
Shanghai Enjoy Bath Thermostatic Technology Co. Ltd (SMLG)
Address
F-202 Building 5 No.84 Jinwen Road Zhuqiao Town
Phone
+86-21-50321360
General Email
markyu@smlgood.com

View All Listings by this Company

Print This Approval


#2101017

Range of threaded fittings with either plain brass, nickel plated brass or chrome plated brass bodies. Maximum operating pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
1530 Miscellaneous Fittings
Size:
Plain brass bodies: 1/8" to 4" BSP. Nickel plated or chrome plated brass bodies: 1/8" - 1" BSP.
Marking:
‘E’ (brand of factor) & size on body.
Installation Requirements:
R001
Expiry date:
31/01/2026
Model:
IDC 25 range comprising of: Hexagon Nipple M x M Thread Bush Mi x Fi Flanged Blanking Nut RUNNING NIPPLE M x M SPACER NIPPLE M x M BARREL NIPPLE M x M Pipe Nipple M x M Thread Fi x Mi adaptor Thread Fi xFi Straight Reduce M x M adaptor Straight reduce M x F adaptor Straight reduce F x F adaptor Blanking cap Blanking Plug Elbow F x F adaptor Elbow reduce F x F adaptor Elbow M x M adaptor Elbow F x M adaptor Elbow F x F Wall plate TEE F x F x F TEE Reduce F x F x F Cross F x F x F x F Straight Pipe union M x F Straight Pipe union F x F Elbow Pipe union F x F
Product Images

Approval Holder:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Country
China

View All Listings by this Company
Manufacturer:
IDC Fluid Control Co., Ltd.
Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#2012036

Wallgate CWC Series 250 WC pan with direct acting flush valve and DFKIT03 air break (DC device). WC flushing mechanism has a solenoid valve controlling the flow, the valves are operated via an infrared sensor or a piezo control button, this mechanism is fitted with a DC pipe interrupter, the DFKIT03 is fitted with a flow regulator. Maximum working pressure 2.0 bar. Cold water use only.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2012036
Size:
Direct flush solenoid valve – 1” BSP Male inlet/outlet. DC Pipe Interrupter 1” BSP Female Inlet to 1 ½” BSP Male outlet.
Marking:
Wallgate, model and technical info on control box. Wallgate on WC Pan.
Installation Requirements:
R001 R390 R400
Expiry date:
31/12/2025
Model:
CWC-250. CWC-251. CWC-250-AST. CWC-251-AST. CWC-255. CWC-256. CWC-270-L. CWC-270-R. CWC-280. CWC-280-ST. CWC-281. CWC-281-ST.
Product Images

Approval Holder:
Wallgate Limited
Company Name
Wallgate Limited
Address
Crow Lane Wilton Salisbury Wiltshire
Postcode
SP2 0HB
Phone
Tel: 01722 744594 Fax: 01722 742096

View All Listings by this Company
Manufacturer:
Wallgate Limited
Company Name
Wallgate Limited
Address
Crow Lane Wilton Salisbury Wiltshire
Postcode
SP2 0HB
Phone
Tel: 01722 744594 Fax: 01722 742096

View All Listings by this Company

Print This Approval


#2012323

Shower kit, intended for use with ovens, incorporating a triple layered hose on a reel and a push-button operated shower handset. The inlet of the shower handset incorporates a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 4.0 bar. Cold water use only.

Section:
1530 Miscellaneous Fittings
Size:
10mm spigot connection
Marking:
Fagor logo and model on hose reel cover.
Installation Requirements:
R001 R040
Expiry date:
31/12/2025
Model:
SWH
Product Images

Approval Holder:
Fagor Industrial S Coop.
Company Name
Fagor Industrial S Coop.
Address
Barrio Sancholopetegui 22 20560 - Oñati
Country
Spain
Phone
+34 943 71 80 30
General Email
info@fagorindustrial.com

View All Listings by this Company
Manufacturer:
Fagor Industrial S Coop.
Company Name
Fagor Industrial S Coop.
Address
Barrio Sancholopetegui 22 20560 - Oñati
Country
Spain
Phone
+34 943 71 80 30
General Email
info@fagorindustrial.com

View All Listings by this Company

Print This Approval


#2101064

Range of circulation valves and flow sensor valves with EPDM seals and O-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 90ºC.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2101064
Size:
Please refer to model.
Marking:
Pressure & flow arrow on body. GF and technical info on adhesive label on casing.
Installation Requirements:
R001
Expiry date:
31/01/2026
Model:
Circulation valve LegioTherm 2T / article 9910.015 / (351 110 550): DN15 (¾” BSP (M) x ¾” BSP (M). Circulation valve LegioTherm 2T / article 9910.020 / (351 110 590): DN20 (1” BSP (M) x 1” BSP (M). Circulation valve LegioTherm 2T / article 9910.025 / (351 110 630): DN25 (1 ½” BSP (M) x 1 ½” BSP (M). To be used in conjunction with: Flow sensor (351 110 772 group / Part number 351 110 770). Master Panel (351 110 656).
Product Images

Approval Holder:
Georg Fischer JRG AG
Company Name
Georg Fischer JRG AG
Address
Hauptstrasse 130, 4450 Sissach
Country
Switzerland

View All Listings by this Company
Manufacturer:
Georg Fischer JRG AG
Company Name
Georg Fischer JRG AG
Address
Hauptstrasse 130, 4450 Sissach
Country
Switzerland

View All Listings by this Company

Print This Approval


#2007359

Range of concealed bathroom boxes with extractable shower hoses. The inlet attached to the concealed box incorporates an approved single check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The outlet of the shower hose also includes a stainless steel strainer. Maximum operating temperature 60°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2007359
Size:
½” BSP (M)
Marking:
Gessi on outlet for shower hose.
Installation Requirements:
R001 R007 R009 R040
Expiry date:
31/07/2025
Model:
INCISO 01813 (lower side supply). INCISO 01814 (lateral side supply).
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Country
Italy
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Country
Italy
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company

Print This Approval


#2101068

Range of pressure transmitters with stainless steel bodies. Maximum working pressures: DST-P140 model 25.0 bar, all other models 50.0 bar. Maximum operating temperature 90°C.

Section:
1530 Miscellaneous Fittings
Size:
DST P100: ⅛” NPT (M) & ¼” BSP (M). DST P110: ¼” NPT (M) & ½” BSP (M). DST P140: ½” NPT (M). Size added June 2022: DST P140: ¼” BSP (M). Models Added December 2022: DST P140 G1/2: ½” BSP (M). DST P140 R1/4: ¼” BSPT (M). DST P146 1/4-18 NPT: ¼” NPT (M). DST P146 G1/2: ½” BSP (M).
Marking:
DANFOSS, model number, CE and operating pressure range on body.
Installation Requirements:
R001
Expiry date:
31/01/2026
Model:
Pressure Transmitter series DST P1XX: DST P100. DST P110. DST P140. Models added December 2022: DST P140. DST P146.
Product Images

Approval Holder:
Danfoss A/S
Company Name
Danfoss A/S
Address
Nordborgvej 81 6430 Nordborg
Country
Denmark
Phone
+74 88 22 22
General Email
danfoss@danfoss.com

View All Listings by this Company
Manufacturer:
Danfoss Tianjin Ltd.
Company Name
Danfoss Tianjin Ltd.
Address
Quanhui Road 9th Wuqing Development District Tianjin 300170
Country
China
General Email

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 5 of 16

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.