TEST SITE

Combination Tap Assemblies

Section Code 0684 : Tap with a non-touch methods of flow control and a single inlet. Products listed in this section utilise flow control methods that do not require touch to activate.

Back To Directory Sections

#2110374

Range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies comprising of a concealed brass body and a separate spout and trim set (chromium plated brass). Flow is controlled by a solenoid valve activated via an infra-red sensor. The inlets (within the) concealed body incorporate a plastic filter and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap with a non-touch methods of flow control and a single inlet. Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2110374
Size:
½” BSP (F)
Marking:
Gessi on backplate
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2026
Model:
44665 (concealed body) Which must be used in conjunction with the following spout trim sets: 54014, 54114, 54214, 54314, 54414, 54015, 54115, 54215, 54315, 54415.
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Country
Italy
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Country
Italy
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company

Print This Approval


#2111016

Wall mounted, single hole, single outlet (fixed) electronically controlled tap assembly (various finishes). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 40°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap with a non-touch methods of flow control and a single inlet. Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2111016
Size:
½” BSP (M)
Marking:
Zhong Rui Yi Sheng on wall plate
Installation Requirements:
R001 R009 R040 R570
Expiry date:
30/11/2026
Model:
WJ0513XX XX denotes the finish and can be replaced with any of the following: No Code = Chrome BBR = Brushed Brass BBL = Brushed Black MB = Matt Black SS = Stainless Steel
Product Images

Approval Holder:
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Company Name
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Address
Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave., JiaojiangDistrict, Taizhou City, Zhejiang Province, China.(318000)

View All Listings by this Company
Manufacturer:
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Company Name
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Address
Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave., JiaojiangDistrict, Taizhou City, Zhejiang Province, China.(318000)

View All Listings by this Company

Print This Approval


#2111017

Deck mounted, single hole, single outlet (fixed) electronically controlled tap assembly (various finishes). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Product supplied with metal backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 40°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap with a non-touch methods of flow control and a single inlet. Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2111017
Size:
½” BSP (M)
Marking:
Zhong Rui Yi Sheng on spout
Installation Requirements:
R001 R006 R009 R570
Expiry date:
30/11/2026
Model:
WJ0149XX XX denotes the finish and can be replaced with any of the following: No Code = Chrome BBR = Brushed Brass BBL = Brushed Black MB = Matt Black SS = Stainless Steel
Product Images

Approval Holder:
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Company Name
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Address
Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave., JiaojiangDistrict, Taizhou City, Zhejiang Province, China.(318000)

View All Listings by this Company
Manufacturer:
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Company Name
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Address
Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave., JiaojiangDistrict, Taizhou City, Zhejiang Province, China.(318000)

View All Listings by this Company

Print This Approval


#2111053

Deck mounted, single hole, single outlet (fixed) electronically controlled tap assembly (various finishes). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Product supplied with metal backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 40°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap with a non-touch methods of flow control and a single inlet. Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2111053
Size:
½” BSP (M)
Marking:
JTP on spout
Installation Requirements:
R001 R006 R009 R570
Expiry date:
30/11/2026
Model:
20149, 230149BBR, 270149BBL, 280149MB & IX0149 COMBINATION TAP ASSEMBLIES

Approval Holder:
Just Taps Plus UK Ltd
Company Name
Just Taps Plus UK Ltd
Address
Unit 3, Tomo Industrial Estate, Packet Boat Lane, Cowley.
Postcode
UB8 2JP
Country
Uxbridge.
Phone
01895 44 22 11
General Email
info@jtpuk.co.uk

View All Listings by this Company

Print This Approval


#2111054

Wall mounted, single hole, single outlet (fixed) electronically controlled tap assembly (various finishes). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 40°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap with a non-touch methods of flow control and a single inlet. Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2111054
Size:
½” BSP (M)
Marking:
JTP on wall plate
Installation Requirements:
R001 R009 R040 R570
Expiry date:
30/11/2026
Model:
20513, 230513BBR, 270513BBL, 280513MB & IX0513 COMBINATION TAP ASSEMBLIES

Approval Holder:
Just Taps Plus UK Ltd
Company Name
Just Taps Plus UK Ltd
Address
Unit 3, Tomo Industrial Estate, Packet Boat Lane, Cowley.
Postcode
UB8 2JP
Country
Uxbridge.
Phone
01895 44 22 11
General Email
info@jtpuk.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 5 of 27

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.