Section Code 0470 : Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
Back To Directory SectionsRange of single hole, single outlet (swivel) combination tap assemblies (chromium or gold plated brass), incorporating non-rising spindle headworks with cross top operating members. The spout outlet incorporates a plastic flow straightener. Supplied with a combined isolation valve and single check valve assembly (suitable for Fluid Category 2) for both inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C
Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. The cold water inlet tail incorporates approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (chromium plated), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with under counter near boiling water unit (vented via the spout outlet) and in-line water filter. Flow is controlled by a ceramic cartridge headwork with a single lever operating member. Instantaneous filtered hot water is controlled by a self-closing quarter turn ceramic disc headwork with a single lever operating member. Filtered cold water is controlled by a solenoid valve activated by an infrared sensor. The product is supplied with a loose ⅜” x 15mm reducer, as well as an inline pushfit body incorporating an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Both are intended to be installed on the inlet to the water filter. The product is supplied with loose ½” BSP (M) x ⅜ BSP (F) adaptor for installation on the hot and cold inlets to the tap. The spout outlets incorporate a plastic aerator. Maximum working pressure 8.6 bar. Maximum operating temperature 70°C, except near boiling water circuit (from the under counter unit onwards) 99°C and the cold filter circuit which is cold supply only to the filter.
Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (chromium plated), incorporating ceramic cartridge headworks and single lever operating member. The connection to flexible hose and spray outlets incorporates an approved single check valve cartridge (however, the whole product has not been fully tested to demonstrate that it provides adequate backflow protection) the outlets incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Page 5 of 70
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
