Range of multistage centrifugal pumps with stainless steel bodies and impellers, and EPDM ‘O’-rings. Maximum operating pressure 11.0 bar. Maximum working temperature 90°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2105026

Size:

1” BSP (F) inlet x 1 ¼” BSP (F) outlet.

Marking:

Pedrollo S.p.A. logo on body. PEDROLLO, CE, model number, maximum temperature and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/05/2026

Model:

Single Phase: FCRm 90/5, FCRm 90/6, FCRm 90/7, FCRm 130/3, FCRm 130/4, FCRm 130/5, FCRm200/3, FCRm 200/4, FCRm 200/5. Three Phase: FCR 90/5, FCR 90/6, FCR 90/7, FCR 130/3, FCR 130/4, FCR 130/5, FCR 130/6, FCR 200/3, FCR 200/4, FCR 200/5, FCR200/6.

Product Images

Approval Holder:

Pedrollo Spa

Company Name

Pedrollo Spa

Address

View All Listings by this Company

Manufacturer:

Pedrollo Spa

Company Name

Pedrollo Spa

Address

View All Listings by this Company

Range of pump units with plastic bodies and impellers, EPDM ‘O’-rings, expansion vessel with an EPDM membrane and a carbon graphite/ceramic/NBR shaft seal (bt-ar 13 bx 4ff xp). Each pump inlet incorporates a non-return valve. Single versions are standalone pumps, twin versions also include stainless steel manifolds. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2105028

Size:

1” BSP (M) to pump. 1½” BSP (F) to manifold (twin models only).

Marking:

Pedrollo on body. Model, PN, max temp, date of manufacture within serial number (DGP YY MM x xxx) and other technical info on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/05/2026

Model:

Single pump booster set: DGPED 3 (Pedrollo) DGPED 5 (Pedrollo) Twin pump booster set with manifold: Gruppo 2DGPED 33 (Pedrollo) Gruppo 2DGPED 35 (Pedrollo) Gruppo 2DGPED 55 (Pedrollo) DGPED 3 = single pump, size 3 m³/h (50l/min). DGPED 5 = single pump, size 5 m³/h (83.33l/min). 2DGPED 33 = 2 pumps booster, size 3 m³/h (50l/min) for each pump. 2DGPED 35 = 2 pumps booster, size 3 m³/h (50l/min) for one pump, size 5 m³/h (83.33l/min) for the other pump. 2DGPED 55 = 2 pumps booster, size 5 m³/h (83.33l/min) for each pump.

Product Images

Approval Holder:

Pedrollo S.p.A.

Company Name

Pedrollo S.p.A.

Address

via Enrico Fermi, 7 37047 San Bonifacio (VR)

Country

Italy

Phone

+39 045 6136311

General Email

vendite@pedrollo.com

View All Listings by this Company

Manufacturer:

Pedrollo S.p.A.

Company Name

Pedrollo S.p.A.

Address

via Enrico Fermi, 7 37047 San Bonifacio (VR)

Country

Italy

Phone

+39 045 6136311

General Email

vendite@pedrollo.com

View All Listings by this Company

Range of horizontal self-priming multistage pumps with stainless steel bodies, stainless steel impellers, shaft and outer sleeve. Maximum working pressure 10.0 Bar Maximum operating temperatures: EH Three phase models 85°C, EH Single phase models 55.0°C and EHsp models 35°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2104008

Size:

EH models: 1 ¼” BSP (F) – 2” BSP (F) EHsp models: 1” BSP (F)

Marking:

Data label showing Franklin electric S.r.l, model number, PMAX and other technical info on body. WRAS label on body. Max temperature on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/04/2026

Model:

Horizontal/Self-Priming Multi-Stage Pumps: EH 3/XX A KKK MM EN B C D. EH 5/XX A KKK MM EN B C D. EH 9/XX A KKK MM EN B C D. EH 15/XX A KKK MM EN B C D. EH 20/XX A KKK MM EN B C D. EHsp 3/XX A KKK MM EN B C D. EHsp 5/XX A KKK MM EN B C D. Where: EH = Standard model. EHsp = Self-priming model. 3/5/9/15/20 = rated power [m³/h]. XX = no. of stages (50 Hz single phase): 2 to 9 for EH 3 & 5; 2 to 6 for EH 9; 2 to 3 for EH 15; 2 for EH 20; 4 & 5 stages for EHsp 3 & 5. (50 Hz three phase): 2 to 9 for EH 3 & 5; 2 to 8 for EH 9; 2 to 7 for EH 15; 2 to 5 for EH 20; 4 & 5 stages for EHsp 3 & 5. (60 Hz single phase): 2 to 7 for EH 3; 2 to 5 for EH 5; 2 to 3 for EH 9; 3 to 5 for EHsp 3 & 5. (60 Hz three phase): 2 to 7 for EH 3 & 5; 2 to 5 for EH 9; 2 to 4 for EH 15; 2 to 3 for EH 20; 3 to 5 for EHsp 3 & 5. A = Pump material: “I” for AISI 304 (All the versions) and “N” for AISI 316 (not available for “EHsp” versions). KKK = Motor power (kW x 10). MM = motor connection and frequency as follows: M5 = single phase and 50Hz T5 = three phase and 50Hz M6 = single phase and 60Hz T6 = three phase and 60Hz EN = Type of mechanical seal: E0 or E1 or E2 for EH 3/5/9 models. E1 or E2 for EH 15/20 models. E0 for EHsp models. B = “No load” - standard version, D - sealing disc with plug. C = “No load” - standard version, A - cable with plug, S = without condensate drain plugs. D = motor efficiency class.

Approval Holder:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company

Range of self-priming pumps with stainless steel bodies and impellers, and EPDM ‘O’-rings. Maximum working pressure 7.0 bar. Cold water use only. From November 2021 maximum operating temperature 60°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2105014

Size:

1” BSP (F) inlet/outlet.

Marking:

Plurijet and logo on body. PEDROLLO, Plurijet. CE, temperature and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/05/2026

Model:

Plurijetm 3/80, Plurijetm 4/80, Plurijetm 3/100, Plurijetm 4/100, Plurijet 3/80, Plurijet 4/80, Plurijet 3/100, Plurijet 4/100.

Product Images

Approval Holder:

Pedrollo S.p.A.

Company Name

Pedrollo S.p.A.

Address

via Enrico Fermi, 7 37047 San Bonifacio (VR)

Country

Italy

Phone

+39 045 6136311

General Email

vendite@pedrollo.com

View All Listings by this Company

Manufacturer:

Pedrollo S.p.A.

Company Name

Pedrollo S.p.A.

Address

via Enrico Fermi, 7 37047 San Bonifacio (VR)

Country

Italy

Phone

+39 045 6136311

General Email

vendite@pedrollo.com

View All Listings by this Company

Range of single stage end suction pumps with stainless steel or cast iron pump housings, EPDM ‘O’-rings and wear rings available in low-lead bronze/brass or stainless steel. Cast iron models are coated in black cathodic paint (textured finish) or black epoxy (smooth finish). The pumps are available with carbon graphite/silicon carbide mechanical shaft seal. Impellors are available in cast iron with black cathodic paint, low-lead bronze or stainless steel. The pumps are available with fixed flange, as well as loose flange (model dependent). Maximum working pressure 10.0 or 16.0 bar depending on model. Maximum operating temperatures: Stainless steel and cast iron with (smooth) epoxy coating pumps 85°C. Cast iron pumps with (textured) cathodic paint coating are cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2104914

Size:

Nominal ø of suction port sizes (DN): 50, 65, 80, 100, 125, 150, 200, 250, 300, 350. Nominal ø of discharge port (DN): 32, 40, 50, 65, 80, 100, 125, 150, 200, 250,300

Marking:

Grundfos on body. Model, Pressure Max, Temperature Max, Made in Hungary and Grundfos logo on data plate.

Installation Requirements:

R001 R415

Expiry date:

30/04/2026

Model:

NB, NBE, NBG, NBGE, NK, NKE, NKG, NKGE. NB, NBE, NBG, NBGE Example codes: NBE _ - 32 -125 .1 /142 S2 X1 F 1 X2 E S BBQE. NBG 125 -100 -160 /160-142 X1 F 2 X2 E S BQQE. NK, NKE, NKG, NKGE Example codes: NKE _ - 32 -125 .1 /142 S2 X1 F 1 X2 E S BBQE. NKG 125 -100 -160 /160-142 X1 F 2 X2 E S BQQE. Where: NBE, NBG, NKE or NKG is the type range. It can also be NB, NBGE, NK or NKGE. NB, NBG, NK, NKG: Pump with standard motor. NBE, NBGE, NKE, NKGE: Pump with MGE motor. _ Nominal diameter (mm) of inlet port (DN) - not displayed on NB/NBE/NK/NKE models. For NBG/NBGE/NKG/NKGE models the value will be between 50 & 350. 32 = Nominal diameter (mm) of outlet port (DN). Value between 32 & 300. 125 = Nominal impeller diameter [mm] (dimension varies). .1 = Reduced performance. 142 = Actual impeller diameter [mm] (dimension varies). Sensor version S1 Without factory-fitted sensor, pressure sensor is supplied with the pump. S2 With factory-fitted differential-pressure sensor, Series 2000. X1: Letter or multiple letters for pump version. Pipe connection F: DIN flange. Flange pressure rating (PN - nominal pressure) 1 = 10 bar. 2 = 16 bar. X2: Materials - Pump housing/Impeller/Wear ring/Shaft denoted by a single letter. Rubber parts in pump The letter indicates material of O-ring for pump cover E: EPDM. Shaft seal arrangement S: Single seal. Code for mechanical shaft seal and shaft seal rubber parts BBQE or BQQE.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Country

Denmark

Phone

+45 24610542

View All Listings by this Company

Centrifugal pump with a stainless steel casing and shaft, silicon carbide and EPDM shaft seals, NBR ‘O’-rings and washers. Maximum working pressure 8.0 bar. Maximum operating temperature 45°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2105303

Size:

DN100

Marking:

Whale Enterprise, model, temperature and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/05/2026

Model:

Molex Aqua 220

Product Images

Approval Holder:

Whale Tankers Ltd

Company Name

Whale Tankers Ltd

Address

Ravenshaw Solihull West Midlands

Postcode

B91 2SU

Country

United Kingdom

Phone

0121 704 5700

General Email

whalemail@whale.co.uk

View All Listings by this Company

Manufacturer:

whale Enterprise Pvt Ltd

Company Name

whale Enterprise Pvt Ltd

Address

1/1D Vilankurichi Road Near Senthottam Kalapatti Coimbatore 641 048 Tamilnadu

Country

India

General Email

View All Listings by this Company

Range of inline circulating pumps with bronze bodies, plastic impeller and EPDM rubber seals. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2106807

Size:

Please refer to model.

Marking:

Circulating Pumps, CE, Model, PN, flow arrow, serial number, date of manufacture (YYWW) and other technical information on body.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

SE20B - 1½” BSP (M). SE60B- 1½” BSP (M).

Product Images

Approval Holder:

Circulating Pumps Ltd

Company Name

Circulating Pumps Ltd

Address

21 Tuesday Market Place, Kings Lynn, Norfolk

Postcode

PE30 1JW

View All Listings by this Company

Range of booster pumps with stainless steel bodies and impellers, EPDM ‘O’-rings and a ceramic/graphite/EPDM shaft seal. Maximum working pressure 6.0 bar. Maximum operating temperature 40°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2106012

Size:

1” BSP (F) inlet/outlet

Marking:

Pedrollo, model number, max. temp and other technical information on data plate on body

Installation Requirements:

R001 R415

Expiry date:

30/06/2026

Model:

Single phase models: JCRm 1C, JCRm 1B, JCRm 1A, JCRm 2C, JCRm 2CL, JCRm 2B, JCRm 2A. Three phase models: JCR 1C, JCR 1B, JCR 1A, JCR 2C, JCR 2CL, JCR 2B, JCR 2A.

Product Images

Approval Holder:

Pedrollo S.p.A.

Company Name

Pedrollo S.p.A.

Address

via Enrico Fermi, 7 37047 San Bonifacio (VR)

Country

Italy

Phone

+39 045 6136311

General Email

vendite@pedrollo.com

View All Listings by this Company

Manufacturer:

Pedrollo S.p.A.

Company Name

Pedrollo S.p.A.

Address

via Enrico Fermi, 7 37047 San Bonifacio (VR)

Country

Italy

Phone

+39 045 6136311

General Email

vendite@pedrollo.com

View All Listings by this Company

Range of booster pumps with stainless steel bodies and impellers, EPDM ‘O’-rings and a ceramic/graphite/EPDM shaft seal. Maximum working pressure 7.0 bar. Cold water use only. From November 2021 maximum operating temperature 60°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2106013

Size:

1” BSP (F)

Marking:

PEDROLLO logo on body. PEDROLLO, CE, model number, maximum temperature and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

30/06/2026

Model:

Single phase models: 2CRm 80, 3CRm 80, 4CRm 80, 5CRm 80, 3CRm 100, 4CRm 100, 5CRm 100. Three phase models: 2CR 80, 3CR 80, 4CR 80, 5CR 80, 3CR 100, 4CR 100, 5CR 100.

Product Images

Approval Holder:

Pedrollo S.p.A.

Company Name

Pedrollo S.p.A.

Address

via Enrico Fermi, 7 37047 San Bonifacio (VR)

Country

Italy

Phone

+39 045 6136311

General Email

vendite@pedrollo.com

View All Listings by this Company

Manufacturer:

Pedrollo S.p.A.

Company Name

Pedrollo S.p.A.

Address

via Enrico Fermi, 7 37047 San Bonifacio (VR)

Country

Italy

Phone

+39 045 6136311

General Email

vendite@pedrollo.com

View All Listings by this Company

Range of cast iron (blue epoxy coated) (G versions only) or stainless steel (all other versions - F, N, R, T) vertical multistage pumps with stainless steel impellers, shaft and outer sleeve and EPDM 'O'-rings and seals. The pumps incorporate a ceramic/carbon graphite/EPDM and stainless steel mechanical shaft seal (QBEGG). Maximum working pressures: 1-22SV models: 1SV27-1SV37 (F VERSION) - PN16 (25mm). 3SV23-3SV33 (F VERSION) - PN16 (25mm). 5SV23-5SV33 (F VERSION) - PN16 (32mm). 10SV27-10SV21 (F VERSION) - PN16 (40mm). 15SV11-15SV17 (F VERSION) - PN16 (50mm). 22SV12-22SV17 (F VERSION) - PN16 (50mm). 1SV02-1SV25 (F VERSION) - PN25 (25mm). 3SV02-3SV21 (F VERSION) - PN25 (25mm). 5SV02-5SV16 (F VERSION) - PN25 (32mm). 10SV01-10SV13 (F VERSION) - PN25 (40mm). 15SV01-15SV10 (F VERSION) - PN25 (50mm). 22SV01-22SV10 (F VERSION) - PN25 (50mm). N VERSIONS ALL MODELS - PN25 (25-50mm). R VERSION ALL MODELS - PN25 (25-50mm). T VERSION ALL MODELS - PN16 (25-50mm). 33-125SV models: 33SV1-33SV5, 33SV6/2AG150T/D & 33SV6/2AN150T/D (G or N VERSION) - PN16 (65mm). 46SV1-46SV5 (G or N VERSION) - PN16 (80mm). 66SV1-66SV5 (G or N VERSION) - PN16 (100mm). 92SV1-92SV4 (G or N VERSION) - PN16 (100mm). 125SV1-125SV6 (G VERSION) - PN16 (125mm). 33SV7-33SV10, 33SV6/1AG150T/D, 33SV6/1AN150T/D, 33SV6G150T/D & 33SV6N150T/D (G VERSION) - PN25, (N VERSION) - PN16 (65mm). 46SV6-46SV9 (G VERSION) - PN25, (N VERSION) - PN16 (80mm). 66SV6-66SV8 (G VERSION) - PN25, (N VERSION) - PN16 (100mm). 92SV5-92SV7 (G VERSION) - PN25, (N VERSION) - PN16 (100mm). 125SV7-125SV8 (G VERSION) - PN25 (125mm). 33SV10-33SV13 (G VERSION) - PN40 (65mm). 46SV10-46SV13 (G VERSION) - PN40 (80mm). Cold water use only. VERSION) - PN25 (100mm). 92SV5-92SV7 (G or N VERSION) - PN25 (100mm). 125SV7-125SV8 (G or N VERSION) - PN25 (125mm). 33SV10-33SV13 (G VERSION) - PN40 (65mm). 46SV10-46SV13 (G VERSION) - PN40 (80mm). Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2102706

Size:

Flanged inlet and outlet: (T versions have 2 bolt oval flanges). (F, G, N, R versions have round flanges). 1SV-3SV: DN25. 5SV: DN32. 10SV: DN40. 15-22SV: DN50. 33SV: DN65. 46SV: DN80. 66SV-92SV: DN100. 125SV: DN125.

Marking:

LOWARA (brand of Xylem), PN and technical info on data plate or label on body. WRAS approved product (cold water use only) and LOWARA on adhesive labels on body.

Installation Requirements:

R001 R415

Expiry date:

28/02/2026

Model:

1SV, 3SV, 5SV, 10SV, 15SV, 22SV, 33SV, 46SV, 66SV, 92SV & 125SV series pumps. Example code: 10SV_05F_022_ _T/D Where: • 10 = flow rate in m³/h (1, 3, 5, 10, 15, 22, 33, 46, 66, 92, 125). • SV = series name. • _ = Motor operation. blank = standard version, H = equipped with Hydrovar, E = e-SM (1SV-22SV models only) or a single letter denoting the type of the variable speed drive model used. • 05 = 2 digits for number of impellers [05 = 5 impellers], can also be represented as: X/1A or X/2A, where X = number of impellers: 1-13, /1 or /2 = 1 or 2 impellers with outer diameter reduced. A = reduction type. • F = body type: F, T, R, G or N. 1SV-25SV models F - AISI 304, round flanges, T - AISI 304, oval flanges, R - AISI 304, discharge port above suction, round flanges, N - AISI 316, round flanges. 33-125SV models G - AISI 304/Cast Iron, round flanges. N - AISI 316, round flanges, • _ = blank (null) to denote standard version. • 022 = Rated motor power - 3 digits (kW x 10). • _ = blank (null) to denote 2-pole, 4 = 4 pole. • _ = blank (null) to denote 50Hz, 6 = 60Hz, 0 = e-SM (1SV-22SV models only). • T = Three-phase or M to denote single-phase or Null = standard version. • /D = relates to supply voltage and can also be blank, /2, /4 or /4/2.

Approval Holder:

Xylem Service Italia S.r.l

Company Name

Xylem Service Italia S.r.l

Address

Via Lombardi 14, 36075 Montecchio Maggiore VI, Vicenza

Country

Italy

Phone

0039 0444 707111

View All Listings by this Company

Manufacturer:

Xylem Service Italia S.r.l, Xylem Water Solutions UK Limited, LOWARA VOGEL POLSKA SP.Z.O.O., Lowara Unipersonale srl, Goulds Water Technology, Xylem Water Systems International Inc Philippines.

Company Name

Xylem Service Italia S.r.l, Xylem Water Solutions UK Limited, LOWARA VOGEL POLSKA SP.Z.O.O., Lowara Unipersonale srl, Goulds Water Technology, Xylem Water Systems International Inc Philippines.

Address

Xylem Service Italia S.r.l, Via Dottore Vittorio Lombardi 14, 36075 - Montecchio Maggiore (VI), Vizenca, Italy Xylem Water Solutions UK Limited, Via Dottore Vittorio Lombardi 14, 36075 - Montecchio Maggiore (VI), Vizenca, Italy LOWARA VOGEL POLSKA SP.Z.O.O., PL 57-100 Strzelin Ul. Kazimierza Wielkiego 5 Poland. Lowara Unipersonale srl, Via Dottore Vittorio Lombardi 14, 36075 - Montecchio Maggiore (VI), Vizenca, Italy Goulds Water Technology, Via Dottore Vittorio Lombardi 14, 36075 - Montecchio Maggiore (VI), Vizenca, Italy No. 12 Ring Road, LISP II, Calamba City 4027, Laguna, Philippines.

View All Listings by this Company