Water Regulations Approval Scheme Ltd

Combination Tap Assemblies

Section Code 0450 : Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Back To Directory Sections

WRAS Approval Number: #2007903

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating non-rising spindle headworks with dome type operating members. The spout outlet incorporates a plastic flow straightener. Product is supplied with a click waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2007903
Size:: 15mm copper tails
Marking:: Alterna on operating member.
Installation Requirements:: R001 R006 R010
Expiry date:: 31/07/2025
Model:: TRDCBMXR

Approval Holder:: Saint-Gobain Building Distribution Ltd

Company Name
Saint-Gobain Building Distribution Ltd
Address

View All Listings by this Company
Manufacturer:: Saint-Gobain Building Distribution Ltd

Company Name
Saint-Gobain Building Distribution Ltd
Address

View All Listings by this Company

WRAS Approval Number: #2007909

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a flow straightener. Product is supplied with a click type waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 65°C.

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2007909
Size:: Stainless steel braided EPDM lined hose assemblies with ½” captive nut end connections.
Marking:: Bristan on operating member.
Installation Requirements:: R001 R006 R010
Expiry date:: 31/07/2025
Model:: 511GF

Approval Holder:: Bristan Group Limited

Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company
Manufacturer:: Bristan Group Limited

Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

WRAS Approval Number: #2007077

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type waste. Maximum working pressure 10 bar. Maximum operating temperature 70°C.

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2007077
Size:: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:: ebb & flo (brand of Toolstation) on tap body.
Installation Requirements:: R001 R006 R010
Expiry date:: 31/07/2025
Model:: 20761

Approval Holder:: TOOLSTATION LTD

Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN
Country
SOMERSET

View All Listings by this Company

WRAS Approval Number: #2007312

Range of single hole, single outlet (fixed) brass bodied combination tap assemblies (various finishes, see model). Incorporating ceramic cartridge headwork and single lever operating members. The spout outlet incorporates a plastic aerator. Models A42568VUK, A4256834VUK, A4256826VUK & A4256836VUK are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2007312
Size:: Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
Marking:: Vitra, date of manufacture (WW/YY) on body.
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 31/07/2025
Model:: ORIGIN A42555VUK Basin Mixer Short (Chrome) ORIGIN A4255534VUK Basin Mixer Short (Brushed Nickel) ORIGIN A4255526VUK Basin Mixer Short (Copper) ORIGIN A4255536VUK Basin Mixer Short (Matte Black) ORIGIN A42556VUK Basin Mixer (Chrome) ORIGIN A4255634VUK Basin Mixer (Brushed Nickel) ORIGIN A4255626VUK Basin Mixer (Copper) ORIGIN A4255636VUK Basin Mixer (Matte Black) ORIGIN A42557VUK Basin Mixer For Bowls (Chrome) ORIGIN A4255734VUK Basin Mixer For Bowls (Brushed Nickel) ORIGIN A4255726VUK Basin Mixer For Bowls (Copper) ORIGIN A4255736VUK Basin Mixer For Bowls (Matte Black) ORIGIN A42558VUK Basin Mixer For Bowls - Large (Chrome) ORIGIN A4255834VUK Basin Mixer For Bowls - Large (Brushed Nickel) ORIGIN A4255826VUK Basin Mixer For Bowls - Large (Copper) ORIGIN A4255836VUK Basin Mixer For Bowls - Large (Matte Black) ORIGIN A42568VUK Basin Mixer For Bowls with pop-up waste (Chrome) ORIGIN A4256834VUK Basin Mixer For Bowls with pop-up waste (Brushed Nickel) ORIGIN A4256826VUK Basin Mixer For Bowls with pop-up waste (Copper) ORIGIN A4256836VUK Basin Mixer For Bowls with pop-up waste (Matte Black)

Product Images

Approval Holder:: Eczacibasi Building Materials Vitra Faucet Division

Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company
Manufacturer:: Eczacibasi Building Materials Vitra Faucet Division

Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

WRAS Approval Number: #2006080

Deck mounted, single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2006080
Size:: Stainless steel braided, PEX lined flexible hose assembly with a ½” BSP (F) captive nut
Marking:: SWIRL on rear of body
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 30/06/2025
Model:: 5416G COMBINATION TAP ASSEMBLIES

Approval Holder:: Kingfisher Plc.

Company Name
Kingfisher Plc.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX
Phone
+44 (0) 20 7372 8008

View All Listings by this Company

WRAS Approval Number: #2009005

Range of single hole, single outlet, fixed combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with either a lever or click type pop up waste (see models). Maximum working pressure 5.0 bar. Maximum operating temperature 60.0°C

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2009005
Size:: Polyethylene terephthalate (PET) braided TpSiv lined flexible hose assembly with EPDM washer & ½” BSP captive nut end connection.
Marking:: AXCES by VADO on front of tap body.
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 30/09/2025
Model:: Models with click type waste AX-AVA-100/CC-CP AX-NUR-100/CC-CP AX-IRO-100/CC-CP AX-VAL-100/CC-CP AX-MET-100/CC-CP AX-MET-100M/CC-CP AX-EKO-100/CC-CP AX-EKO-100M/CC-CP Model with lever waste AX-NUR-100-CP AX-KOR-100-CP AX-VAL-100-CP AX-MET-100-CP AX-EKO-100-CP AX-PRO-300-CP

Product Images

Approval Holder:: Vado

Company Name
Vado
Address
Cheddar Business Park Wedmore Road Cheddar
Postcode
BS27 3EB
Country
Somerset
Phone
Tel: 01934 744466

View All Listings by this Company
Manufacturer:: Vado

Company Name
Vado
Address
Cheddar Business Park Wedmore Road Cheddar
Postcode
BS27 3EB
Country
Somerset
Phone
Tel: 01934 744466

View All Listings by this Company

WRAS Approval Number: #2009905

Single hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with cross top operating members. Product is supplied with a pop-up waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2009905
Size:: 15mm copper tube
Marking:: Bristan logo etched on the shrouds
Installation Requirements:: R001 R006 R010
Expiry date:: 30/09/2025
Model:: D2 BAS C CD

Product Images

Approval Holder:: Bristan Group Limited

Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

WRAS Approval Number: #2009307

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes, see model). Incorporating ceramic cartridge headworks, and single lever operating members. The inlets incorporate flow strainer and the spout outlet incorporates a plastic flow straightener. Can be supplied with our without a pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2009307
Size:: Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
Marking:: Paini and Paini logo (an apple) on body and operating member.
Installation Requirements:: R001 R010 R006
Expiry date:: 30/09/2025
Model:: 53**2050H59, Unika lever , without waste 53**2050H670, Clinica lever , without waste 53**2050H68, Tex lever , without waste 53**2110H59, Unika lever , with waste 53**2110H670, Clinica lever , with waste 53**2110H68, Tex lever , with waste Where ** denotes finishes and can be replaced by: CR = chrome plated, PW = stainless steel brushed PVD, PY = black PVD

Product Images

Approval Holder:: Paini S.p.A. Rubinetterie

Company Name
Paini S.p.A. Rubinetterie
Address
Via Cremosina 43 28076 Pogno (NO)
Country
Italy
Phone
+39 0322 9971

View All Listings by this Company
Manufacturer:: Paini S.p.A. Rubinetterie

Company Name
Paini S.p.A. Rubinetterie
Address
Via Cremosina 43 28076 Pogno (NO)
Country
Italy
Phone
+39 0322 9971

View All Listings by this Company

WRAS Approval Number: #2009321

Range of deck mounted, electronically operated combination tap assemblies (chromium plated brass) incorporating a solenoid valve controlling the flow which is actuated via in infrared sensor. The spout outlet incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2009321
Size:: ½” BSP (M)
Marking:: Dolphin Solutions logo (D with a dolphin) on Body
Installation Requirements:: R001 R006
Expiry date:: 30/09/2025
Model:: DSaaa.bbb.ccc.d.ee Where ‘aaa’ denotes the style type, the following options are available: DS211 - 90° bent spout DS213 - 55° bent spout Where ‘bbb’ denotes the vertical height of the spout in mm. Range 125mm - 225mm in 25mm increments. Where ‘ccc’ denotes the horizontal length (projection) of the spout in mm. Range 125mm – 225mm in 25mm increments. Where ‘d’ denotes the material finish, the following options are available: 1 - brushed satin, 2 - mirror polished, 3 - PVD satin, 4 - PVD mirror polished or 5 - powder coated. Where ‘ee’ is a numerical code between .00-.99 which denotes the colour of the finished surface. This is only present and applicable on PVD (where ‘d’ is 3 or 4) or PC (where ‘d’ is 5) material finish options. Models may include an additional .R suffix which denotes that the tap is supplied without the rosette.

Product Images

Approval Holder:: Dolphin Solutions Ltd

Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company
Manufacturer:: Dolphin Solutions Ltd

Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

WRAS Approval Number: #2010012

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2010012
Size:: Grey polymeric (PET) braided PE-X lined flexible hose assemblies with ½” captive nuts. Stainless steel braided PE-X lined flexible hose assemblies with ½” captive nuts.
Marking:: Gaoao on body.
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 31/10/2025
Model:: MA3580. MA3581. MA3582. MA3584. MA3590. MA3591. MA3592. MA3594. MA3058. Models added November 2021: MA3580YB MA3580YN(CS) MA3580YW MA3581YB MA3581YN(CS) MA3581YW MA3582YB MA3582YW MA3582YN(CS) MA3584YB MA3584YN(CS) MA3584YW

Product Images

Approval Holder:: Zhejiang Gaoao Sanitary Ware Co. Ltd.

Company Name
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province
Country
China

View All Listings by this Company
Manufacturer:: Zhejiang Gaoao Sanitary Ware Co. Ltd.

Company Name
Zhejiang Gaoao Sanitary Ware Co. Ltd.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province
Country
China

View All Listings by this Company