TEST SITE

Rubbers

Section Code 5365 : Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

Back To Directory Sections

#2306559

'ML 57314'. Black coloured, compression moulded EPDM material. Shore hardness 68A. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2306559
Expiry date:
30/06/2028
Approval Holder:
SumiRiko AVS Germany GmbH
Company Name
SumiRiko AVS Germany GmbH
Address
Karl Winnacker Strasse 22a, D-39396 Steinau an der Strasse
Country
Germany

View All Listings by this Company

Print This Approval

#2307527

'EPDM-812-cm (70H/mid)'. Black coloured, compression moulded EPDM sheet material. Shore hardness 70A. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2307527
Expiry date:
31/07/2028
Approval Holder:
Ein Shemer Rubber Industries A.C.A. Ltd
Company Name
Ein Shemer Rubber Industries A.C.A. Ltd
Address
D.N. Hefer 38816 Kibbutz Ein-Shemer
Country
Israel

View All Listings by this Company

Print This Approval

#2306561

'PT-EPDM55'. Black coloured, compression moulded EPDM material. Shore hardness 55. Tested in-radius size 1.1mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2306561
Expiry date:
30/06/2028
Approval Holder:
Shanghai Pingtai Rubber Products Co. Ltd.
Company Name
Shanghai Pingtai Rubber Products Co. Ltd.
Address
No. 6 Siping Road, Situan Town, Fengxian District, Shanghai

View All Listings by this Company

Print This Approval

#2307529

'AEC.5/EPDM.80'. Black coloured, compression moulded EPDM material. Shore hardness 80. Tested in-radius size 1.1mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2307529
Expiry date:
31/07/2028
Approval Holder:
Allianz Elastomer
Company Name
Allianz Elastomer
Address
Opp.-Samarpan Lamination, Rajpar Road AT-Sakatsanla, Morbi 363641 Gujarat
Country
India

View All Listings by this Company

Print This Approval

#2308514

'EPDM 773'. Black coloured, injection moulded EPDM sheet material (manufactured in Czech Republic). Shore hardness 50. Tested in radius sizes 0.9mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308514
Expiry date:
31/08/2028
Approval Holder:
Trelleborg Pipe Seals
Company Name
Trelleborg Pipe Seals
Address
Pascallaan 80, 8218NJ Lelystad
Country
Netherlands

View All Listings by this Company

Print This Approval

#2308515

'EPDM 798'. Black coloured, injection moulded EPDM material (manufactured in Czech Republic). Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308515
Expiry date:
31/08/2028
Approval Holder:
Trelleborg Pipe Seals
Company Name
Trelleborg Pipe Seals
Address
Pascallaan 80, 8218NJ Lelystad
Country
Netherlands

View All Listings by this Company

Print This Approval

#2308523

'Kingsun EP1702'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308523
Expiry date:
31/08/2028
Approval Holder:
Kingsun Sealing Technology (Shanghai) Co., Ltd
Company Name
Kingsun Sealing Technology (Shanghai) Co., Ltd
Address
Room402, Building 7, No.5, Lane 689, Xiwang Road, Jiading District, Shanghai
Country
China

View All Listings by this Company

Print This Approval

#2312503

'XXE01'. Black coloured, compression moulded EPDM rubber material. Shore hardness 50. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2312503
Expiry date:
31/12/2028
Approval Holder:
Xingtai Rubber Factory
Company Name
Xingtai Rubber Factory
Address
No. 175 North Xingzhou Road, Xingtai City, Hebei Province
Country
China

View All Listings by this Company

Print This Approval

#2309510

'JM-EP01'. Black coloured, compression moulded EPDM material. Shore hardness 75. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2309510
Expiry date:
30/09/2028
Approval Holder:
Wuhu Jinmao Environmental Science & Technology Co. Ltd.
Company Name
Wuhu Jinmao Environmental Science & Technology Co. Ltd.
Address
The Industrial Zone in Suncun Town, Fanchang County, Anhui Province
Country
China

View All Listings by this Company

Print This Approval

#2308528

'Sunaflex T 8193'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308528
Expiry date:
31/08/2028
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2308529

'AquaFlex T 5893'. Black coloured, compression moulded EPDM material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308529
Expiry date:
31/08/2028
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2308530

'AquaFlex T 9696'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308530
Expiry date:
31/08/2028
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2409500

'EUW-70'. Black coloured, injection moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 0.5mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2409500
Expiry date:
30/09/2029
Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval

#2302565

‘SMS-8000-Premium’. Black coloured, compression moulded EPDM material. Shore hardness 80 respectively. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2302565
Expiry date:
29/02/2028
Approval Holder:
Samsun Makina Sanayi A.S.
Company Name
Samsun Makina Sanayi A.S.
Address
Organize Sanayi Bolgesi, Yasar Dogu Caddesi, No. 33 P.K. 136
Country
55267 Kutlukent,

View All Listings by this Company

Print This Approval

#2309514

'NPEPDM-80'. Shore hardness 80. 'NPEPDM-50' was added to the approval in December 2023. Shore hardness 50. Black coloured, compression moulded, EPDM materials. Tested in-radius size 1.0mm. For use with water up to 70°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2309514
Expiry date:
30/09/2028
Approval Holder:
National Polymers
Company Name
National Polymers
Address
Survey No.-2B6, Plot No .3 Vill -Rupal, Taluka- Bavla, Ahmedabad-380009, Gujarat
Country
India

View All Listings by this Company

Print This Approval

#2309521

'334701 - EPDM peroxide 70'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2309521
Expiry date:
30/09/2028
Approval Holder:
Techne SA
Company Name
Techne SA
Address
ZA Les Haies, 69480 Morance
Country
France
Phone
+33 478 430156
General Email
www.techne.fr

View All Listings by this Company

Print This Approval

#2309526

'Ganga 50, 60, 70, 80 & 90'. Black coloured, compression moulded EPDM materials with a shore hardness of between 50 & 90 ShA. Tested in-radius size 1.1mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2309526
Expiry date:
30/09/2028
Approval Holder:
Mangla Rubber Technologies
Company Name
Mangla Rubber Technologies
Address
319 Shivaji Road, Vijay Nagar, Meerut, UP 250002
Country
India

View All Listings by this Company

Print This Approval

#2310508

'EPDM50BKWS, EPDM55BKWS, EPDM60BKWS, EPDM65BKWS, EPDM70BKWS, EPDM75BKWS & EPDM80BKWS'. Black coloured, compression moulded EPDM rubber materials. Shore hardness between 50 & 80. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2310508
Expiry date:
31/10/2028
Approval Holder:
Kesaria Rubber Industries Pvt. Ltd.
Company Name
Kesaria Rubber Industries Pvt. Ltd.
Address
Binola Industrial Area, VPO Bhoda Kalan, 57/58 KM Stone, NH-8, Gurgaon, 122413, Haryana
Country
India

View All Listings by this Company

Print This Approval

#2204543

'JJSXEPDMIRHD50 (shore hardness 50) & JJSXEPDMIRHD70 (shore hardness 70)'. Black coloured, compression moulded EPDM materials. Tested in-radius size 0.99mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204543
Expiry date:
30/04/2027
Approval Holder:
Saint-Gobain PAM(Jiangsu) Pipelines Technology Co., Ltd.
Company Name
Saint-Gobain PAM(Jiangsu) Pipelines Technology Co., Ltd.
Address
Building No.5, Zi Yun Wisdom Plaza, No. 19 Kazimen Avenue, Qinhuai District, Nanjing
Country
China

View All Listings by this Company

Print This Approval

#2310526

Sunaflex® T 8715. Black coloured, compression moulded EPDM material. Shore hardness 50. Tested in-radius size 1.00mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2310526
Expiry date:
31/10/2028
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2303557

'E7014F'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 23°C. From April 2023, the material is for use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2303557
Expiry date:
31/03/2028
Approval Holder:
Maihua (Xiamen) newmaterial Co., Ltd.
Company Name
Maihua (Xiamen) newmaterial Co., Ltd.
Address
2F,factory building 3, No.36,Dapu Road, Fengnan, Tongan District, Xiamen City
Country
China

View All Listings by this Company

Print This Approval

#2310547

'EPDM 30114010102A Black'. Black coloured, compression moulded EPDM sheet material. Shore hardness 75. Tested in-radius size 3.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2310547
Expiry date:
31/10/2028
Approval Holder:
Unitech Rubber Seal Solutions (Tianjin) Co Ltd
Company Name
Unitech Rubber Seal Solutions (Tianjin) Co Ltd
Address
Jingbin Industry Park, Wuqing District, Tianjin
Country
China
Phone
+86-13821320325; +86-22-85190998
General Email
service@unitech.cc

View All Listings by this Company

Print This Approval

#2309538

'PT0165/2'. Black coloured, injection moulded EPDM material. Shore hardness 70. Tested in-radius 1.25mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2309538
Expiry date:
30/09/2028
Approval Holder:
TS International S.r.l.
Company Name
TS International S.r.l.
Address
Via G. Carducci 19, 24060 Sovere (BG)
Country
Italy

View All Listings by this Company

Print This Approval

#2311517

'HBHG'. Black coloured, compression moulded EPDM material. Shore hardness 50. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2311517
Expiry date:
30/11/2028
Approval Holder:
Hebei Huagen Technology Co., Ltd.
Company Name
Hebei Huagen Technology Co., Ltd.
Address
568 Zhonghu Avenue, Taocheng District, Hengshui City, Hebei Province
Country
China

View All Listings by this Company

Print This Approval

#2308551

'AquaFlex T 5857'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 70°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308551
Expiry date:
31/08/2028
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2311548

'334137 – EPDM Peroxide 70'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2311548
Expiry date:
30/11/2028
Approval Holder:
Techne
Company Name
Techne
Address
ZA Les Haies, 69480 MORANCE
Country
France

View All Listings by this Company

Print This Approval

#2311549

'PT0469'. Black coloured, injection moulded EPDM material. Shore hardness 60. Tested in-radius size 1.3mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2311549
Expiry date:
30/11/2028
Approval Holder:
TS International S.r.l.
Company Name
TS International S.r.l.
Address
Via G. Carducci 19, 24060 Sovere (BG)
Country
Italy

View All Listings by this Company

Print This Approval

#2403502

'EP002971PWRC'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2403502
Expiry date:
31/03/2029
Approval Holder:
Chang Xing Rubber (Shanghai) LLC.
Company Name
Chang Xing Rubber (Shanghai) LLC.
Address
No. 88, Zhong-Chen Rd. Songjiang Zone, Shanghai City
Country
China

View All Listings by this Company

Print This Approval

#2403503

'EP7001165PWRC'. Black coloured, compression moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2403503
Expiry date:
31/03/2029
Approval Holder:
Chang Xing Rubber (Shanghai) LLC.
Company Name
Chang Xing Rubber (Shanghai) LLC.
Address
No. 88, Zhong-Chen Rd. Songjiang Zone, Shanghai City
Country
China

View All Listings by this Company

Print This Approval

#2405504

'EPDM HT5697-4A'. Black coloured, injection moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 50°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2405504
Expiry date:
31/05/2029
Approval Holder:
Terramix SA/Hultec
Company Name
Terramix SA/Hultec
Address
De Empaques Santa Ana 150 M Este Y 125 M Sur Pozos De Santa Ana
Country
San Jose, Costa Rica
Phone
Tel: +506 2829900 Fax: +506 2822514

View All Listings by this Company

Print This Approval

#2311556

'ML 57302'. Black coloured, compression moulded EPDM material. Shore hardness 55A. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2311556
Expiry date:
30/11/2028
Approval Holder:
SumiRiko AVS Germany GmbH
Company Name
SumiRiko AVS Germany GmbH
Address
Karl Winnacker Strasse 22a, D-39396 Steinau an der Strasse
Country
Germany

View All Listings by this Company

Print This Approval

#2312536

'SME001 EPDM'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2312536
Expiry date:
31/12/2028
Approval Holder:
SRI RAMKARTHIC POLYMERS PVT LTD
Company Name
SRI RAMKARTHIC POLYMERS PVT LTD
Address
D.NO 2/1 - 1&2 SF NO 237/1B&2A Thudiyalur Road, Kottaipalayam, Coimbatore, TA 641110
Country
India

View All Listings by this Company

Print This Approval

#240550005

'E59WKZ'. Black coloured, injection moulded EPDM rubber material. Shore hardness 58. Tested in-radius 1.0mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
240550005
Expiry date:
31/05/2029
Approval Holder:
Duram Industries A.C. Ltd.
Company Name
Duram Industries A.C. Ltd.
Address
Kibbuts Ramat, Hakovesh, 44930
Country
Israel

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 4 of 4

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.