Water Regulations Approval Scheme Ltd

Rubbers

Section Code 5365 : Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

Back To Directory Sections

WRAS Approval Number: #2012525

‘EPDM-FF’. Black coloured, compression moulded EPDM rubber material. Shore hardness 80A. Tested in-radius size 0.89mm. For use with water up to 85°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2012525
Expiry date:: 31/12/2025

Approval Holder:: Alfa Laval Lund AB

Company Name
Alfa Laval Lund AB
Address
PO Box 74, SE-22100, Lund
Country
Sweden

View All Listings by this Company

WRAS Approval Number: #2012531

'TIMO-70'. Black coloured, injection moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 1.17mm. For use with water up to 85°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2012531
Expiry date:: 31/12/2025

Approval Holder:: Tecnogomma International SpA

Company Name
Tecnogomma International SpA
Address
Via Castello 46, 24060 Adrara, San Martino
Country
Italy
Phone
0039 035 933 839

View All Listings by this Company

WRAS Approval Number: #2012532

'H600071'. Black coloured, compression moulded EPDM material. Shore hardness 55. Tested in-radius size 1.25mm. For use with water up to 65°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2012532
Expiry date:: 31/12/2025

Approval Holder:: ARSAN KAUÇUK PLASTİK MAKİNE SANAYİİ VE TİCARET A.Ş.

Company Name
ARSAN KAUÇUK PLASTİK MAKİNE SANAYİİ VE TİCARET A.Ş.
Address
Ferizli OSB. 1. Cadde No:20/1, Ferizli, Sakarya
Country
Turkey

View All Listings by this Company

WRAS Approval Number: #2012534

'51M6767'. Black coloured, injection moulded EPDM material. Shore hardness 67. Tested in-radius size 0.5mm. For use with water up to 60°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2012534
Expiry date:: 31/12/2025

Approval Holder:: WOCO GmbH & Co. KG

Company Name
WOCO GmbH & Co. KG
Address
Hanauer Landstraße 16 D 63628 Bad Soden - Salmünster Germany
Phone
Tel: +49 605678441 Fax: +49 605678274

View All Listings by this Company

WRAS Approval Number: #2012537

'TWK3628'. Black coloured, injection moulded EPDM material. Shore hardness 67. Tested in-radius size 0.5mm. For use with water up to 60°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2012537
Expiry date:: 31/12/2025

Approval Holder:: Polymer-Technik Elbe GmbH

Company Name
Polymer-Technik Elbe GmbH
Address
Heuweg 5, 06886 Lutherstadt Wittenberg
Country
Germany
Phone
+49-3491-659-155

View All Listings by this Company