Range of single hole, single outlet fixed combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating members. The spout outlet incorporates a plastic flow straightener. Products are supplied with a click type waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010912

Size:

Stainless steel braided EPDM lined hose assemblies with ½” BSP captive nut end connections

Marking:

Twyford on operating member

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2025

Model:

X505126 CP, X505122CP, X605122CP, X705122CP, X605126CP, X705126CP

Approval Holder:

Twyford Bathrooms (Geberit Service)

Company Name

Twyford Bathrooms (Geberit Service)

Address

Caledonian Building Services Site 2 Off Ossington Road Newark

Postcode

NG23 6NT

Phone

01270 879777

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Products are supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010081

Size:

Stainless steel braided EPDM lined hose assemblies with 1/2" captive nuts.

Marking:

AQUALISA ON OPERATING MEMBER

Installation Requirements:

R001 R005 R010

Expiry date:

31/10/2025

Model:

CT.SPT.CH CENTRAL CHROME PILLAR TAP DT.LPT.CH DOWNTOWN CHROME PILLAR TAP (LARGE) DT.SPT.CH DOWNTOWN CHROME PILLAR TAP (LARGE) COMBINATION TAP ASSEMBLIES

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

01959 560 000

General Email

marketing@aqualisa.com

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (chrome plated), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets of models SAVV2313 & SEV313 incorporate a plastic aerator, model SPA2113/EX incorporates a stainless steel filter. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010320

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Deva on operating member (all models). Models SAVV2313 and SEV313, DTC53 (brand of Methven) on rear of body. Model SPA2113/EX, DTC52 (brand of Methven) on rear of body.

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2025

Model:

SAVV2313 Savvi MK2 SEV313 SPA2113/EX Sparkle MK2

Product Images

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

View All Listings by this Company

Single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated via infra-red sensor. Solenoid housing incorporated a filter mesh. The product is supplied with a stainless steel braided EPDM lined flexible hose assembly to connect between the tap body and the solenoid valve. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010363

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP (F) captive nut

Marking:

Zhejiang Homes Bathroom Technology Co Ltd on body.

Installation Requirements:

R001 R006 R008

Expiry date:

31/10/2025

Model:

ST008 Sensor tap.

Product Images

Approval Holder:

Zhejiang Homes Bathroom Technology Co.,Ltd

Company Name

Zhejiang Homes Bathroom Technology Co.,Ltd

Address

No 256 Jinhai Road Economic Development Zone

Postcode

China

View All Listings by this Company

Manufacturer:

Zhejiang Homes Bathroom Technology Co.,Ltd

Company Name

Zhejiang Homes Bathroom Technology Co.,Ltd

Address

No 256 Jinhai Road Economic Development Zone

Postcode

China

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever (Absolute range) or dome type (Engineer & Illustrious range) operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 3.0 bar. Maximum operating temperature 60.0°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2011008

Size:

Stainless steel braided EPDM lined flexible hose with ½” BSP captive nut (Illustrious range) or Stainless steel braided PEX lined flexible hose with ½” BSP captive nut (Engineer and Absolute ranges)

Marking:

Swadling Brassware on operating member (Illustrious range) or “S” swaddling logo on rear base of body (Engineer & Absolute ranges).

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2025

Model:

Illustrious Range: 9920XX, 9923XX, 9926XX, 9929XX & 9922XX. Engineer Range: 8920XX. Absolute Range: 6920XX. XX Denotes the finish. Available In Finishes As Below: NP = Nickel Plated NB = Nickel Brushed CP = Chrome Plated MG = Gold Plated LB = Living Brass GB = Gold Brushed BB = Brushed Brass AB = Aged Brass

Product Images

Approval Holder:

Matki Plc.

Company Name

Matki Plc.

Address

Churchward Road Yate Bristol

Postcode

BS37 5PL

View All Listings by this Company

Manufacturer:

Swadling Brassware

Company Name

Swadling Brassware

Address

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator and the inlets incorporate a stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2011030

Size:

Nylon braided, PEX lined flexible hose incorporating either 3/8” BSP captive nut or ½” BSP captive nut.

Marking:

Duschy on operating members.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2025

Model:

P10000921 & P10000923

Product Images

Approval Holder:

Xuancheng Duschy Electronic & Electrical Appliances Co. Ltd

Company Name

Xuancheng Duschy Electronic & Electrical Appliances Co. Ltd

Address

28 Hongyue Road Economic & Technolgical Development Zone

Postcode

China

View All Listings by this Company

Manufacturer:

Xuancheng Duschy Electronic & Electrical Appliances Co. Ltd

Company Name

Xuancheng Duschy Electronic & Electrical Appliances Co. Ltd

Address

28 Hongyue Road Economic & Technolgical Development Zone

Postcode

China

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener with an optional aerator. Fittings are supplied with a pop-up waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2011054

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

Francis Pegler on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2025

Model:

4K7101 Tempest mono basin mixer. 4K7102 Tempest mini mono basin mixer.

Product Images

Approval Holder:

STH Westco Limited

Company Name

STH Westco Limited

Address

Unit C6 William Way, Moss Industrial Estate, St. Helen's Road, Leigh, Lancashire

Postcode

WN7 3PT

Country

St Helens Road

Phone

01942 265227

View All Listings by this Company

Manufacturer:

STH Jiangmen

Company Name

STH Jiangmen

View All Listings by this Company

Single hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener and the product is supplied with a click type waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2011904

Size:

Stainless steel braided, EPDM lined hose assemblies incorporating ½” BSP captive nut end connections

Marking:

Alterna on operating member

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2025

Model:

ALT10021

Product Images

Approval Holder:

Saint-Gobain Building Distribution Ltd

Company Name

Saint-Gobain Building Distribution Ltd

Address

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet of model 825JK incorporates a plastic aerator. Products are supplied with a click type waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2011905

Size:

Stainless steel braided, EPDM lined hose assemblies incorporating ½” BSP captive nut end connections

Marking:

Bristan on operating member

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2025

Model:

818JK & 825JK

Product Images

Approval Holder:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating a ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Product is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2011306

Size:

Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.

Marking:

Hansgrohe on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2025

Model:

71164xxx - Hansgrohe Logis E OHM 70 CoolStart. 71165xxx - Hansgrohe Logis E OHM 100 CoolStart. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Single hole, single outlet (waterfall spout) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with single lever operating member. The inlets incorporate a stainless-steel strainer and the product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2011012

Size:

Stainless steel braided PEX lined flexible hose assemblies with 3/8” captive nuts.

Marking:

Hansgrohe on operating member.

Installation Requirements:

R001 R006 R009 R010 R160

Expiry date:

30/11/2025

Model:

14 127 xxx Hansgrohe Talis Classic Single lever basin mixer 90 with pop-up waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Products come with pop up wastes. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2011014

Size:

Stainless steel or nylon braided PEX lined flexible hoses with 3/8” BSP (M) captive nut connections.

Marking:

AXOR on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2025

Model:

34 010 xxx AXOR Citterio M with pop-up waste set 34 016 xxx AXOR Citterio M with pop-up waste set 34 017 xxx AXOR Citterio M with waste set 34 127 xxx AXOR Citterio M with waste set.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headworks and single lever operating member. The spout outlets incorporate a plastic aerator. Some models are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2011013

Size:

Stainless Steel braided, PEX lined flexible hose assemblies with a 3/8” BSP (F) captive nuts.

Marking:

Hansgrohe on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2025

Model:

31 075 xxx Hansgrohe Metris Classic with pop-up waste set. 31 077 xxx Hansgrohe Metris Classic without waste set. 31 078 xxx Hansgrohe Metris Classic for washbowls with pop-up waste set. 31 300 xxx Hansgrohe Metropol Classic with pop-up waste set. 31 301 xxx Hansgrohe Metropol Classic without waste set. 31 302 xxx Hansgrohe Metropol Classic with pop-up waste set. 31 303 xxx Hansgrohe Metropol Classic for washbowls with pop-up waste set. Where xxx denotes the surface finish which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headworks and single lever operating members. The outlet incorporates a plastic flow straighter or aerator and the product is supplied with a coin type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2004068

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

INSTINCT on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2025

Model:

4E1022 KISO MONO BASIN SINK MIXER- COMBINATION TAP ASSEMBLY

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate either a plastic flow straightener or aerator. The product is supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010087

Size:

Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” captive nut end connections.

Marking:

INSTINCT ON OPERATNG MEMBER

Installation Requirements:

R001 R005 R010

Expiry date:

31/10/2025

Model:

4E1283 - ELION BASIN MONO & 4E1284 - ELION BASIN MINI MONO COMBINATION TAP ASSEMBLIES

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener with an optional aerator. Fittings are supplied with a pop-up waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2011087

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

INSTINCT on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2025

Model:

4E1121 -PARAGON MONO BASIN MIXER & 4E1122 - PARAGON TALL MONO BASIN MIXER

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener with an optional aerator. Fittings are supplied with a pop-up waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2011089

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

ESTEEM on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2025

Model:

E60056 - CANIM MONO BASIN MIXER & E60057 - CANIM TALL MONO BASIN MIXER

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes, see model). Incorporating ceramic cartridge headworks, and single lever operating members. The inlets incorporate flow strainer and the spout outlet incorporates a plastic flow straightener. Can be supplied with our without a pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2009345

Size:

Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.

Marking:

Sanifirst on operating member Neohstrahl on body

Installation Requirements:

R001 R010 R006

Expiry date:

30/09/2025

Model:

75840, 75841, 75842, 75843, 75844 & 75845

Approval Holder:

Les Robinets Presto S.A

Company Name

Les Robinets Presto S.A

Address

4 Rue Lavoiser 17110 St. Georges De Didonne.

Country

France

Phone

+33 546 053 452

General Email

l.granseigne@presto.fr

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The tap body incorporates plastic flow regulator and the product is also supplied with a click type pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2012009

Size:

Stainless steel braided flexible hose assemblies with EPDM lined hose assemblies with ½” captive nut end connections.

Marking:

Francis Pegler on the base of body (model 922026). Comap on the base of body (model 922027).

Installation Requirements:

R001 R006 R010 R160

Expiry date:

31/12/2025

Model:

922026 Cascada Mini Mono Basin Mixer 922027 Cascada Mono Basin Mixer

Product Images

Approval Holder:

StH Westco Ltd

Company Name

StH Westco Ltd

Address

Unit C6 William Way Moss Industrial Estate St Helens Road Leigh

Postcode

WN7 3PT

Country

United Kingdom

Phone

01942 265230

View All Listings by this Company

Manufacturer:

STH Jiangmen

Company Name

STH Jiangmen

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks, single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with a pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2011317

Size:

Polyamide (PA) braided PEX lined hose assembly incorporating 3/8” captive nut end connections.

Marking:

Grohe on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2025

Model:

Grohe “Euroeco” 32.765, 32.766, 32.762 & 32.763

Product Images

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg, 58675 Hemer

Country

Germany

Phone

02372 930

General Email

info@grohe.com

View All Listings by this Company

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg, 58675 Hemer

Country

Germany

Phone

02372 930

General Email

info@grohe.com

View All Listings by this Company