TEST SITE

Combination Tap Assemblies

Section Code 0450 : Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Back To Directory Sections

#2109363

Single hole, single outlet deck mounted (fixed) combination tap assembly with soap dispenser and hand dryer appliances operated via an infra-red sensor. This product incorporates a solenoid valve and plastic flow restrictor. Maximum working pressure 10.0 bar. Maximum operating temperature 50°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2109363
Size:
½” BSP (M)
Marking:
Wallgate logo (W) on fascia of tap.
Installation Requirements:
R001 R006 R009 R570
Expiry date:
30/09/2026
Model:
THRII-TAP+D ( Deck mounted)
Product Images
Approval Holder:
Wallgate Limited
Company Name
Wallgate Limited
Address
Crow Lane Wilton Salisbury Wiltshire
Postcode
SP2 0HB
Phone
Tel: 01722 744594 Fax: 01722 742096

View All Listings by this Company
Manufacturer:
Wallgate Limited
Company Name
Wallgate Limited
Address
Crow Lane Wilton Salisbury Wiltshire
Postcode
SP2 0HB
Phone
Tel: 01722 744594 Fax: 01722 742096

View All Listings by this Company

Print This Approval

#2109368

Range of single hole, single outlet (fixed) combination tap assemblies (brass body with various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with a pop up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2109368
Size:
Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
Marking:
Kohler on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/09/2026
Model:
14402W-4A-** Purist Monobloc. 14402W-4-** Purist Monobloc. ‘**’ denotes the surface finish (which is a non-water contact part). It will be 1-3 digits, which can be any combination of numbers and/or letters.
Product Images
Approval Holder:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road, Cheltenham, Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
+44 (0) 844 571 5000

View All Listings by this Company
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road, Cheltenham, Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
+44 (0) 844 571 5000

View All Listings by this Company

Print This Approval

#2109372

Single hole, single outlet wall mounted (fixed) combination tap assembly with soap dispenser and hand dryer appliances operated via an infra-red sensor. This product incorporates a solenoid valve and plastic flow restrictor. Maximum working pressure 10.0 bar. Maximum operating temperature 50°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2109372
Size:
½” BSP (M)
Marking:
Wallgate logo (W) on fascia of tap.
Installation Requirements:
R001 R009 R040 R570
Expiry date:
30/09/2026
Model:
THRII-TAP+W (Wall mounted)
Approval Holder:
Wallgate Limited
Company Name
Wallgate Limited
Address
Crow Lane Wilton Salisbury Wiltshire
Postcode
SP2 0HB
Phone
Tel: 01722 744594 Fax: 01722 742096

View All Listings by this Company
Manufacturer:
Wallgate Limited
Company Name
Wallgate Limited
Address
Crow Lane Wilton Salisbury Wiltshire
Postcode
SP2 0HB
Phone
Tel: 01722 744594 Fax: 01722 742096

View All Listings by this Company

Print This Approval

#2107038

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a single sequential headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The inlet hoses have integral screwdriver operated isolation valves. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107038
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating15mm compression end connections.
Marking:
Intatec logo, model and date of manufacture (MM/YY) on body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2026
Model:
LO980CP
Product Images
Approval Holder:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Country
United Kingdom
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval

#2109377

Single hole, single outlet (fixed) combination tap assembly (chrome plated brass). Incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2109377
Size:
Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections and supplied with a 3/8” BSP (M) adaptor.
Marking:
Gessi Emporio on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/09/2026
Model:
38605
Product Images
Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Country
Italy
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Country
Italy
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 28 of 76

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.