Water Regulations Approval Scheme Ltd

Coatings, Paints & Linings

Section Code 5030 : Factory applied pipe & fittings coatings.

WRAS Approval Number: #2011551

'GP HBSL EPOXY'. Factory applied, brown coloured epoxy coating. Mix and apply as per manufacturer's standard operating procedure document number 'GP/SOP/HBSL/001', version '01' dated 1st April 2019. Cure for 17 days@30°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2011551
Expiry date:: 30/11/2025

Approval Holder:: Grandpolycoats Company Private Limited

Company Name
Grandpolycoats Company Private Limited
Address
204, Siddharth Complex, R C Dutt Road, Alkapuri, Vadodara - 390001, Gujarat
Country
India

View All Listings by this Company

WRAS Approval Number: #2107533

`Jotaguard VA 5001`. Factory applied, dark blue coloured fusion bonded epoxy coating. Apply and cure as per manufacturers test method document no. '39.40.014', issue date '02.01.2018', revision no. '02'. For use with water up to 85°C.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2107533
Expiry date:: 31/07/2026

Approval Holder:: Jotun India Pvt Ltd.

Company Name
Jotun India Pvt Ltd.
Address
D-280 Ranjangao MIDC, Village Karegaon, Tal-Shirur, Pune-412220
Country
India

View All Listings by this Company

WRAS Approval Number: #2107546

`POWLAC EY161`. Factory applied, blue coloured epoxy powder coating. Apply as per manufacturer's instructions `no. CKP-2015-0172`. Cure for 5 minutes@180°C. For use with water up to 85°C. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2107546
Expiry date:: 31/07/2026

Approval Holder:: Chokwang Paint Ltd.

Company Name
Chokwang Paint Ltd.
Address
148, Samdeok-ro 5beon-gil, Sasang-gu, Busan
Country
46909,

View All Listings by this Company

WRAS Approval Number: #2107547

'Global Smart (INSUPIPE)'. Factory applied, grey coloured cement. Mix cement:sand:water in a 30:55:15 ratio. Cure for 48 hours@25°C. For use with water up to 85°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2107547
Expiry date:: 31/07/2026

Approval Holder:: Space for Technical Solutions L.L.C. 'Global Smart'

Company Name
Space for Technical Solutions L.L.C. 'Global Smart'
Address
Development Area, AlMarfraq
Country
Jordan

View All Listings by this Company

WRAS Approval Number: #2106545

'ELASTOPOXY PRIMER HP and ELASTOSEAL W Coating'. Factory applied, grey coloured (once mixed), two-component primer (non-water contact primer) and two-component coating (water contact coating). Mix and apply 'ELASTOPOXY PRIMER HP as per Product Data Sheet ‘TSS/TD/280721/C’. Cure for 2 hours@25°C. Then mix and apply ‘ELASTOSEAL W Coating’ as per Product Data Sheet ‘TSS/TDS/260721-B’. Cure for 1 minute@25°C. For use with water up to 85°C.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2106545
Expiry date:: 30/06/2026

Approval Holder:: CMCI - Construction Material Chemical Industries

Company Name
CMCI - Construction Material Chemical Industries
Address
PO Box 7137, First Industrial City, Damman 31462
Country
Saudi Arabia

View All Listings by this Company