Range of vertical multistage pumps with stainless-steel bodies, stainless-steel impellers, shaft and outer sleeve. Maximum working pressures: T (oval flange): 16.0 bar. V (Victaullic & grooved), C (clamp flanges) & F (round flange) versions: 26.0 bar. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2110136

Size:

FGV3 model - F (round flange) versions: DN25. FGV6-FGV20 models - F (round flange) versions: DN32-50. FGV3-FGV20 models - T (oval flange), V (Victaullic - EV; Grooved - VR), C (clamp flanges) & F (round flange) versions: DN32-50.

Marking:

Fourgroup, model number, and other technical info on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2026

Model:

FGV 3 FGV 6 FGV 10 FGV 15 FGV 20 Code example FGV X/Y A B C D E Where: FGV = Standard Pump model X = Rated flow [m³/h] (varies: 1-20). Y = No. of stages. A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round; "T" - oval; "V" - Victaulic; "C" - clamp. C = Materials: "I" - (AISI304/EN1.4301); "N" (AISI316/EN1.4401). D = Motor power (kW x 10). E = Frequency

Approval Holder:

FOURGROUP

Company Name

FOURGROUP

Address

via E. Fermi 8, 35020 Polverara (PD)

Country

Italy

View All Listings by this Company

Range of horizontal self-priming multistage pumps with stainless steel bodies, stainless steel impellers, shaft and outer sleeve. Maximum working pressure 10.0 Bar Maximum operating temperatures: FGH Three phase models 85°C, FGH Single phase models 55.0°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2104079

Size:

1 ¼” BSP (F) – 2” BSP (F)

Marking:

Fourgroup, model number, and other technical info on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/04/2026

Model:

Horizontal/Self-Priming Multi-Stage Pumps: FGH3/XX A FGH6/XX A FGH10/XX A FGH15/XX A FGH20/XX A Where: FGH = Standard model. 3//6/10/15/20 = rated power [m³/h]. XX = no. of stages A = motor connection T = 3 phase, blank = Single phase

Approval Holder:

FOURGROUP

Company Name

FOURGROUP

Address

via E. Fermi 8, 35020 Polverara (PD)

Country

Italy

View All Listings by this Company

Range of booster pumps with plastic bodies and impellers, stainless steel shafts, brass manifolds, NBR ‘O’-rings and EPDM seals. The product incorporates a pressure vessel. The outlet(s) incorporate(s) an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection The inlet hose(s) supplied with this product incorporate(s) an isolation valve. Maximum working pressure 4.0 bar. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2105325

Size:

Stainless-steel braided EPDM lined flexible hoses with 15mm pushfit (inlet and outlets) x ¾” BSP captive nut end connections (to pump).

Marking:

Bristan, model name & other technical information on adhesive label on pump body.

Installation Requirements:

R001 R150 R415

Expiry date:

31/05/2026

Model:

ST NHPUMP 20TN & 239574

Approval Holder:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Range of cold water supply booster sets, consisting of between 2 & 4 pumps, modular stainless steel manifold system, servicing valve, non-return valve (not suitable for backflow protection) and an expansion vessel. Maximum working pressure 10.0 bar or 16.0 bar (identified on adhesive label on expansion vessel) Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2304317

Size:

DN50 to DN150

Marking:

Dutypoint Ltd. model, serial number and other technical information on adhesive label on base.

Installation Requirements:

R001 R415

Expiry date:

30/04/2028

Model:

VT2-05-xxxx VT2-10-xxxx VT2-15-xxxx VT2-20-xxxx VT3-05-xxxx VT4-05-xxxx VT3-10-xxxx VT3-15-xxxx VT3-20-xxxx VT4-10-xxxx VT4-15-xxxx VT4-20-xxxx Example of model: VT2-05-015T xxxx on end of model codes above denotes all motor size and type. Range: VT. Number of Pumps: 2. Nominal flow rate: (m³/hr) 05. Motor kW: (without decimal)15 (1.5kw). Voltage: (T=400/3/50 M=230/1/50) T

Approval Holder:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Olympus Park, Quedgeley Gloucestershire

Postcode

GL2 4DH

General Email

sales@dutypoint.com

View All Listings by this Company

Manufacturer:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Olympus Park, Quedgeley Gloucestershire

Postcode

GL2 4DH

General Email

sales@dutypoint.com

View All Listings by this Company

Range of circulator pumps with brass bodies, plastic impellor, and EPDM ‘O’-rings and seals. The COMFORT 15-14 BX prefix models incorporate a screwdriver operated isolation valve on the inlet and a non-return valve at the outlet. These are housed within 1” BSP (M) x ½” BSP (M) adaptors. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 95°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2304909

Size:

COMFORT 15-14 B prefix models: ½” BSP (F). COMFORT 15-14 BX prefix models: 1” BSP (M).

Marking:

Grundfos on body. Model on adhesive label on body. Flow arrow on the isolation valve.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

COMFORT 15-14 B PM, COMFORT 15-14 BA PM, COMFORT 15-14 BDT PM, COMFORT 15-14 BX PM, COMFORT 15-14 BXA PM, COMFORT 15-14 BXDT PM.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7, DK-8850 Bjerringbro

Country

Denmark

Phone

+45 24610542

View All Listings by this Company