Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating non-rising spindle headworks with dome type operating members. The spout outlet incorporates a plastic flow straightener. Product is supplied with a click waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2007903

Size:

15mm copper tails

Marking:

Alterna on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2025

Model:

TRDCBMXR

Approval Holder:

Saint-Gobain Building Distribution Ltd

Company Name

Saint-Gobain Building Distribution Ltd

Address

View All Listings by this Company

Manufacturer:

Saint-Gobain Building Distribution Ltd

Company Name

Saint-Gobain Building Distribution Ltd

Address

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a flow straightener. Product is supplied with a click type waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 65°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2007909

Size:

Stainless steel braided EPDM lined hose assemblies with ½” captive nut end connections.

Marking:

Bristan on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2025

Model:

511GF

Approval Holder:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Manufacturer:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type waste. Maximum working pressure 10 bar. Maximum operating temperature 70°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2007077

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.

Marking:

ebb & flo (brand of Toolstation) on tap body.

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2025

Model:

20761

Approval Holder:

TOOLSTATION LTD

Company Name

TOOLSTATION LTD

Address

EXPRESS PARK BRISTOL ROAD BRIDGEWATER

Postcode

TA6 4RN

Country

SOMERSET

View All Listings by this Company

Range of single hole, single outlet (fixed) brass bodied combination tap assemblies (various finishes, see model). Incorporating ceramic cartridge headwork and single lever operating members. The spout outlet incorporates a plastic aerator. Models A42568VUK, A4256834VUK, A4256826VUK & A4256836VUK are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2007312

Size:

Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.

Marking:

Vitra, date of manufacture (WW/YY) on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/07/2025

Model:

ORIGIN A42555VUK Basin Mixer Short (Chrome) ORIGIN A4255534VUK Basin Mixer Short (Brushed Nickel) ORIGIN A4255526VUK Basin Mixer Short (Copper) ORIGIN A4255536VUK Basin Mixer Short (Matte Black) ORIGIN A42556VUK Basin Mixer (Chrome) ORIGIN A4255634VUK Basin Mixer (Brushed Nickel) ORIGIN A4255626VUK Basin Mixer (Copper) ORIGIN A4255636VUK Basin Mixer (Matte Black) ORIGIN A42557VUK Basin Mixer For Bowls (Chrome) ORIGIN A4255734VUK Basin Mixer For Bowls (Brushed Nickel) ORIGIN A4255726VUK Basin Mixer For Bowls (Copper) ORIGIN A4255736VUK Basin Mixer For Bowls (Matte Black) ORIGIN A42558VUK Basin Mixer For Bowls - Large (Chrome) ORIGIN A4255834VUK Basin Mixer For Bowls - Large (Brushed Nickel) ORIGIN A4255826VUK Basin Mixer For Bowls - Large (Copper) ORIGIN A4255836VUK Basin Mixer For Bowls - Large (Matte Black) ORIGIN A42568VUK Basin Mixer For Bowls with pop-up waste (Chrome) ORIGIN A4256834VUK Basin Mixer For Bowls with pop-up waste (Brushed Nickel) ORIGIN A4256826VUK Basin Mixer For Bowls with pop-up waste (Copper) ORIGIN A4256836VUK Basin Mixer For Bowls with pop-up waste (Matte Black)

Product Images

Approval Holder:

Eczacibasi Building Materials Vitra Faucet Division

Company Name

Eczacibasi Building Materials Vitra Faucet Division

Address

4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik

Country

Turkey

Phone

+90 228 314 07 90

View All Listings by this Company

Manufacturer:

Eczacibasi Building Materials Vitra Faucet Division

Company Name

Eczacibasi Building Materials Vitra Faucet Division

Address

4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik

Country

Turkey

Phone

+90 228 314 07 90

View All Listings by this Company

Deck mounted, single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2006080

Size:

Stainless steel braided, PEX lined flexible hose assembly with a ½” BSP (F) captive nut

Marking:

SWIRL on rear of body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/06/2025

Model:

5416G COMBINATION TAP ASSEMBLIES

Approval Holder:

Kingfisher Plc.

Company Name

Kingfisher Plc.

Address

3 Sheldon Square, Paddington, London

Postcode

W2 6PX

Phone

+44 (0) 20 7372 8008

View All Listings by this Company

Range of single hole, single outlet, fixed combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with either a lever or click type pop up waste (see models). Maximum working pressure 5.0 bar. Maximum operating temperature 60.0°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2009005

Size:

Polyethylene terephthalate (PET) braided TpSiv lined flexible hose assembly with EPDM washer & ½” BSP captive nut end connection.

Marking:

AXCES by VADO on front of tap body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2025

Model:

Models with click type waste AX-AVA-100/CC-CP AX-NUR-100/CC-CP AX-IRO-100/CC-CP AX-VAL-100/CC-CP AX-MET-100/CC-CP AX-MET-100M/CC-CP AX-EKO-100/CC-CP AX-EKO-100M/CC-CP Model with lever waste AX-NUR-100-CP AX-KOR-100-CP AX-VAL-100-CP AX-MET-100-CP AX-EKO-100-CP AX-PRO-300-CP

Product Images

Approval Holder:

Vado

Company Name

Vado

Address

Cheddar Business Park Wedmore Road Cheddar

Postcode

BS27 3EB

Country

Somerset

Phone

Tel: 01934 744466

View All Listings by this Company

Manufacturer:

Vado

Company Name

Vado

Address

Cheddar Business Park Wedmore Road Cheddar

Postcode

BS27 3EB

Country

Somerset

Phone

Tel: 01934 744466

View All Listings by this Company

Single hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with cross top operating members. Product is supplied with a pop-up waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2009905

Size:

15mm copper tube

Marking:

Bristan logo etched on the shrouds

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2025

Model:

D2 BAS C CD

Product Images

Approval Holder:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes, see model). Incorporating ceramic cartridge headworks, and single lever operating members. The inlets incorporate flow strainer and the spout outlet incorporates a plastic flow straightener. Can be supplied with our without a pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2009307

Size:

Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.

Marking:

Paini and Paini logo (an apple) on body and operating member.

Installation Requirements:

R001 R010 R006

Expiry date:

30/09/2025

Model:

53**2050H59, Unika lever , without waste 53**2050H670, Clinica lever , without waste 53**2050H68, Tex lever , without waste 53**2110H59, Unika lever , with waste 53**2110H670, Clinica lever , with waste 53**2110H68, Tex lever , with waste Where ** denotes finishes and can be replaced by: CR = chrome plated, PW = stainless steel brushed PVD, PY = black PVD

Product Images

Approval Holder:

Paini S.p.A. Rubinetterie

Company Name

Paini S.p.A. Rubinetterie

Address

Via Cremosina 43 28076 Pogno (NO)

Country

Italy

Phone

+39 0322 9971

View All Listings by this Company

Manufacturer:

Paini S.p.A. Rubinetterie

Company Name

Paini S.p.A. Rubinetterie

Address

Via Cremosina 43 28076 Pogno (NO)

Country

Italy

Phone

+39 0322 9971

View All Listings by this Company

Range of deck mounted, electronically operated combination tap assemblies (chromium plated brass) incorporating a solenoid valve controlling the flow which is actuated via in infrared sensor. The spout outlet incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2009321

Size:

½” BSP (M)

Marking:

Dolphin Solutions logo (D with a dolphin) on Body

Installation Requirements:

R001 R006

Expiry date:

30/09/2025

Model:

DSaaa.bbb.ccc.d.ee Where ‘aaa’ denotes the style type, the following options are available: DS211 - 90° bent spout DS213 - 55° bent spout Where ‘bbb’ denotes the vertical height of the spout in mm. Range 125mm - 225mm in 25mm increments. Where ‘ccc’ denotes the horizontal length (projection) of the spout in mm. Range 125mm – 225mm in 25mm increments. Where ‘d’ denotes the material finish, the following options are available: 1 - brushed satin, 2 - mirror polished, 3 - PVD satin, 4 - PVD mirror polished or 5 - powder coated. Where ‘ee’ is a numerical code between .00-.99 which denotes the colour of the finished surface. This is only present and applicable on PVD (where ‘d’ is 3 or 4) or PC (where ‘d’ is 5) material finish options. Models may include an additional .R suffix which denotes that the tap is supplied without the rosette.

Product Images

Approval Holder:

Dolphin Solutions Ltd

Company Name

Dolphin Solutions Ltd

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

View All Listings by this Company

Manufacturer:

Dolphin Solutions Ltd

Company Name

Dolphin Solutions Ltd

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010012

Size:

Grey polymeric (PET) braided PE-X lined flexible hose assemblies with ½” captive nuts. Stainless steel braided PE-X lined flexible hose assemblies with ½” captive nuts.

Marking:

Gaoao on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/10/2025

Model:

MA3580. MA3581. MA3582. MA3584. MA3590. MA3591. MA3592. MA3594. MA3058. Models added November 2021: MA3580YB MA3580YN(CS) MA3580YW MA3581YB MA3581YN(CS) MA3581YW MA3582YB MA3582YW MA3582YN(CS) MA3584YB MA3584YN(CS) MA3584YW

Product Images

Approval Holder:

Zhejiang Gaoao Sanitary Ware Co. Ltd.

Company Name

Zhejiang Gaoao Sanitary Ware Co. Ltd.

Address

No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Gaoao Sanitary Ware Co. Ltd.

Company Name

Zhejiang Gaoao Sanitary Ware Co. Ltd.

Address

No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province

Country

China

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with single lever or dome type operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010016

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP captive nuts end connections

Marking:

RAK CERAMICS on base of body

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2025

Model:

RAKAMA3001C RAKISH3001C RAKPOR3001C RAKPOS3001C RAKSOR3001C Models added December 2021: RAKPES3001C RAKPER3001C

Product Images

Approval Holder:

RAK CERAMICS UK LTD

Company Name

RAK CERAMICS UK LTD

Address

Paris House Frenchmans Road Petersfield Hampshire

Country

United Kingdom

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate either a plastic flow straightener or aerator. The product is supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010017

Size:

Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” captive nut end connections.

Marking:

COMAP on body.

Installation Requirements:

R001 R005 R010

Expiry date:

31/10/2025

Model:

922009 Andreu mono basin mixer tap 922010 Andreu mini mono basin mixer tap

Product Images

Approval Holder:

StH Westco Ltd

Company Name

StH Westco Ltd

Address

Unit C6 William Way Moss Industrial Estate St Helens Road Leigh

Postcode

WN7 3PT

Country

United Kingdom

Phone

01942 265230

View All Listings by this Company

Manufacturer:

STH Jiangmen

Company Name

STH Jiangmen

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with either a dome type or single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure is 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010025

Size:

Stainless Steel braided EPDM lined flexible hose assemblies with a ½” BSP captive nut end connections

Marking:

Marking: RAK CERAMICS on base of body

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2025

Model:

RAKAMA3016C (Dome) RAKISH3016C (Dome) RAKPOR3016C (Dome) RAKPOS3016C (Dome) RAKSOR3016C (Dome) RAKAMA3003C (Single Lever) RAKISH3003C (Single Lever) RAKPOR3003C (Single Lever) RAKPOS3003C (Single Lever) RAKSOR3003C (Single Lever)

Product Images

Approval Holder:

RAK CERAMICS UK LTD

Company Name

RAK CERAMICS UK LTD

Address

Paris House Frenchmans Road Petersfield Hampshire

Country

United Kingdom

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass & matt black finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a metal strainer and either a plastic aerator or alternative flow straightener. Products are supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010042

Size:

Stainless steel braided EPDM lined hose assemblies with 1/2" captive nuts.

Marking:

PPI on rear of body.

Installation Requirements:

R001 R005 R010

Expiry date:

31/10/2025

Model:

193738 193728 143328 Models added February 2022: 193738 MBK1 & 193728 MBK1.

Product Images

Approval Holder:

PPI Xiamen Industry Co Ltd

Company Name

PPI Xiamen Industry Co Ltd

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

Country

China

View All Listings by this Company

Manufacturer:

PPI Xiamen Industry Co Ltd

Company Name

PPI Xiamen Industry Co Ltd

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

Country

China

View All Listings by this Company

Single hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straighteners Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010910

Size:

Stainless steel braided EPDM lined hose assemblies with ½” BSP captive nut end connections

Marking:

Bristan on the operating member

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2025

Model:

VRT BASNW C

Approval Holder:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Single hole, single outlet fixed combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating. The spout outlet incorporates a plastic flow straightener. Product is supplied with a pop up waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010911

Size:

15mm copper tube

Marking:

Bristan on the operating member

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2025

Model:

VA CN BAS C

Approval Holder:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (in black or chrome finishes) with brass bodies. Incorporating ceramic cartridge headworks, and single lever operating members. The spout outlet incorporates a plastic aerator. Some models are supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010304

Size:

Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.

Marking:

NK Porcelanosa onoperating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/10/2025

Model:

100263947 N199998927. 100263999 N199998926. 100264005 N199998925. 100264006 N199998924. 100263976 N199998923. 100264003 N199998922.

Product Images

Approval Holder:

Noken Design S.A.U

Company Name

Noken Design S.A.U

Address

Carretera Villareal Puebla de Arenoso CV 20 KM 2

Country

Spain

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010327

Size:

Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating 3/8” captive nut end connections.

Marking:

Gessi logo on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2025

Model:

18606

Product Images

Approval Holder:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia

Country

Italy

Phone

+39 0163 454111

General Email

gessi@gessi.it

View All Listings by this Company

Manufacturer:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia

Country

Italy

Phone

+39 0163 454111

General Email

gessi@gessi.it

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010329

Size:

Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating either ½” or 3/8” captive nut end connections (see model).

Marking:

Advance on body.

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2025

Model:

3663602300823, with ½” flexible hose, Brushed Inox 3663602299707, with 3/8” flexible hose, Brushed Inox 3663602300106, with ½” flexible hose, Brushed Brass 3663602300809, with 3/8” flexible hose, Brushed Brass 3663602299745, with ½” flexible hose, Brushed Copper 3663602301288, with 3/8” flexible hose, Brushed Copper 3663602300922, with ½” flexible hose, Matt White 3663602299929, with 3/8” flexible hose, Matt White 3663602300625, with ½” flexible hose, Matt Black 3663602299905, with 3/8” flexible hose, Matt Black

Product Images

Approval Holder:

Hangzhou Advance Hardware Manufacturing Corp.

Company Name

Hangzhou Advance Hardware Manufacturing Corp.

Postcode

CHINA

View All Listings by this Company

Manufacturer:

Zhejiang Teso Hardware Manufacturing Corp.

Company Name

Zhejiang Teso Hardware Manufacturing Corp.

Postcode

CHINA

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic aerator. Models 53003 and 53005 are supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2010351

Size:

Stainless steel braided PEX lined flexible inlet hose assemblies incorporating 3/8” captive nut end connections.

Marking:

Gessi on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/10/2025

Model:

53003 53004 53005 53006

Product Images

Approval Holder:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia

Country

Italy

Phone

+39 0163 454111

General Email

gessi@gessi.it

View All Listings by this Company

Manufacturer:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia

Country

Italy

Phone

+39 0163 454111

General Email

gessi@gessi.it

View All Listings by this Company