A range of wall mounted two-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes see models), incorporating quarter turn ceramic disc headworks, dome type operating members and self-cancelling diverter to shower outlets. The temperature is controlled independently via thermostatic cartridges with dome type operating members. Both operating members incorporate a manual override. Spout outlet incorporates a plastic aerator. Products are supplied with shower hose, shower handset and overhead shower. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

2310029

Size:

½” to ¾” BSP offset unions

Marking:

Hansgrohe on body, shower handset and overhead shower face.

Installation Requirements:

R001 R030

Expiry date:

31/10/2028

Model:

26284xxx Vernis Shape Showerpipe 230 1jet with bath thermostat, 26274xxx Vernis Blend Showerpipe 200 1jet with bath thermostat, 26098xxx Vernis Shape Showerpipe 230 1jet EcoSmart with bath thermostat, 26079xxx Vernis Blend Showerpipe 200 1jet EcoSmart with bath thermostat. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies with (brass bodies - various finishes) incorporating ceramic cartridge headworks with single lever operating members. The products incorporate a self-cancelling diverter to shower outlet and a plastic aerator in the spout outlet. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

2310036

Size:

½” BSP X ¾” BSP offset union

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R030

Expiry date:

31/10/2028

Model:

32 540 XXX 74 540 XXX Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Wall mounted, two hole, single outlet (fixed) combination tap assembly (brass body - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to a shower outlet. The shower outlet connection incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and the spout outlet incorporates a plastic aerator. Product is not supplied with shower hose and handset. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

2310062

Size:

¾” BSP (M) to ½” BSP (M) offset unions.

Marking:

Axor on body.

Installation Requirements:

R001 R030

Expiry date:

31/10/2028

Model:

38 421 xx0. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Two-hole, single outlet (fixed) combination tap assembly, (brass body - various finishes), incorporating quarter turn ceramic disc headworks with various operating members, and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The inlet to the shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models are supplied with a shower hose and handset. The shower handset incorporates a plastic flow restrictor on the inlet. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

2311703

Size:

¾” BSP (M)

Marking:

Samuel Heath on body.

Installation Requirements:

R001 R006 R020

Expiry date:

1/12/2028

Model:

V630-XX Bath Shower Mixer Deck Mounted Model without controllers: V630-XX Bath / Shower Mixer Deck Mounted Controller options: V651-MB-XX = Metal Levers V651-MBB-XX = Gloss Black Levers V651-XB-XX = Cross Tops V651-XB-GBC = Gloss Black Chrome Cross Tops V651-BCQ-XX = Black Quilted Crystal Levers V651-CCQ-XX = Clear Quilted Crystal Levers V651-BCR-XX = Black Radiant Crystal Levers V651-CCR-XX = Clear Radiant Crystal Levers V651-L-XX = Luxe Levers V651-D-XX = Luxe Roundels Models with controllers: V6K30M-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-MB-XX Lever(s). V6K30MB-XX Bath /Shower Mixer includes V630-XX Mixer, V654B-XX Handset, V942-W-XX Hose with V650-MBB-XX andV651-MBB-XX Lever(s). V6K30X-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-XB-XX Lever(s). V6K30XB-XX Bath /Shower Mixer includes V630-XX Mixer, V654B-XX Handset, V942-W-XX Hose with V650-MBB-XX and V651-XB-GBC-XX Lever(s). V6K30L-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-L-XX Lever(s). V6K30D--XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-D-XX Lever(s). V6K30BCQ-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-BCQ-XX Lever(s). V6K30CCQ--XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-CCQ-XX Lever(s). V6K30BCR-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-BCR-XX Lever(s). V6K30CCR-XX Bath /Shower Mixer includes V630-XX Mixer, V654-XX Handset, V942-W-XX Hose with V650-MB-XX and V651-CCR-XX Lever(s). Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, BGM = Brushed Gold Matt Lacquered.

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

info@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

info@samuel-heath.com

View All Listings by this Company

Wall mounted two-hole, single outlet (fixed) combination tap assembly, (brass body - various finishes) incorporating a ceramic cartridge with single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

2311014

Size:

3/4" BSP (M) X 1/2" BSP (M) offset union

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R030

Expiry date:

30/11/2028

Model:

32 420 xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company