Range of single hole, single outlet (fixed) combination tap assemblies incorporating a brass body and ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2209348

Size:

Stainless-steel braided PEX lined flexible hose assemblies with ½” BSP captive nut end connections.

Marking:

HB on body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2027

Model:

NU‐031, NU‐038, NU‐032 & NU‐039

Approval Holder:

Harrison Bathrooms Incorporating Scudo

Company Name

Harrison Bathrooms Incorporating Scudo

Address

Prospect Works, Keighley, West Yorkshire

Postcode

BD21 4LA

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a sequential headwork controlling both flow and temperature with single lever type operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2309927

Size:

Model SF1120CP & SF1140CP 10mm copper tails Model SF1138CP Stainless steel braided EPDM flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Model, Twyford & date of manufacture (MM/YY) on body. Twyford on operating member.

Installation Requirements:

R001 R006

Expiry date:

30/09/2028

Model:

SF1120CP, SF1140CP & SF1138CP

Approval Holder:

Geberit Sales Limited

Company Name

Geberit Sales Limited

Address

Edgehill Drive Warwick

Postcode

CV34 6NH

Country

United Kingdom

Phone

+44 (0)1926 516800 Fax: 01765 640765

General Email

bernd.emmerich@geberit.com

View All Listings by this Company

Wall mounted single hole, single outlet (fixed) combination tap assembly, brass body(various finishes), incorporating a detent headwork that controls both flow and temperature with a single lever operating member. The spout outlet incorporates a plastic aerator. The product also incorporates a permanently open waste outlet. Maximum working pressure 10.0 bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2204331

Size:

1/2" BSP (F)

Marking:

Axor on body

Installation Requirements:

R001 R010 R040 R583

Expiry date:

30/04/2027

Model:

13 625 180 Basic set to be installed in conjunection with: 48 112 xxy Where xx denotes the surface finish (which is a non-water contact part). It will always be 2 digits, which can be any combination of numbers and/or letters. Where y denotes flow rate 0= 5.7L/min, 1 = 4.5L/min As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The 48 000 xxx model is supplied with a pop-up waste. The 48 001 xxx and 48 002 xxx models are supplied with an open waste/non-closing waste. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2209336

Size:

Stainless steel braided thermoplastic silicone (TPSiV) lined flexible hose assemblies with ⅜" captive nut end connections.

Marking:

Marking: AXOR (brand of Hansgrohe SE) on operating member.

Installation Requirements:

R001 R006 R009 R010 R583

Expiry date:

30/09/2027

Model:

48 000 xxx AXOR One single lever basin mixer 70 with pop-up waste set, 48 001 xxx AXOR One single lever basin mixer 70 with waste set, 48 002 xxx AXOR One single lever basin mixer 260 with waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies, (brass bodies - various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates an aerator. Maximum working pressure 10 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2401707

Size:

Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/01/2029

Model:

31 130 xxx Where xxx denotes the surface. It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Single-hole, single outlet, fixed, combination tap assembly with (brass body - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a lever type pop-up waste. Maximum working pressure 10 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2311018

Size:

Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ½” captive nut end connections.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2028

Model:

14 057 xxx – Hansgrohe Ecos Where xxx denotes the surface finish It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2311023

Size:

M10x1

Marking:

Triton on body

Installation Requirements:

R001 R006

Expiry date:

30/11/2028

Model:

86006270

Approval Holder:

Triton Showers

Company Name

Triton Showers

Address

Triton Road, Nuneaton, Warwickshire

Postcode

CV11 4NR

Country

United Kingdom

Phone

02476 324423

General Email

paulrowley@tritonshowers.co.uk

View All Listings by this Company

Range of single-hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar Maximum operating temperature 90.0°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2311073

Size:

Stainless steel braided, TPSiV lined flexible hose assembles incorporating 1/2" BSP (F) captive nut end connections.

Marking:

Cifial logo on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2028

Model:

32XXXMI-625.u 32XXXMI-291.u 32XXXMI-X11.u 32XXXMI-X20.u 32XXXMI-X41.u Where XXX denotes the height profile, and can be replaced with either of the following: 400 = Standard profile 401 = High profile

Approval Holder:

CIFIAL SA

Company Name

CIFIAL SA

Address

AV SANTIGO 184 4520-470 RIO MEAO PORTUGAL

View All Listings by this Company

Manufacturer:

CIFIAL SA

Company Name

CIFIAL SA

Address

AV SANTIGO 184 4520-470 RIO MEAO PORTUGAL

View All Listings by this Company

Range of overhead shower outlets, (chrome plated ABS bodies). The inlets incorporate a plastic flow regulator. Maximum operating temperature 65°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2311362

Size:

½ BSP (F)

Marking:

Almar logo on body

Installation Requirements:

R001 R040

Expiry date:

30/11/2028

Model:

Round Emotion Shower Head D200 – D300 E044075 E044076 E044210 E044049 E044050 E044252 E044040 E044044 E044072 Square Emotion Shower Head D200 – D300 E044077 E044078 E044209 E044220 E044229 E044234 E044039 E044043 E044069

Approval Holder:

Almar s.r.l.

Company Name

Almar s.r.l.

Address

Viale dello Sport 17 bis 21026 Gavirate (VA)

Country

Italy

View All Listings by this Company

Manufacturer:

Almar s.r.l.

Company Name

Almar s.r.l.

Address

Viale dello Sport 17 bis 21026 Gavirate (VA)

Country

Italy

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 10.0 bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2401903

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Crosswater 'X' logo on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/01/2029

Model:

PRO110DNx & PRO114DNx. Where x = the colour/finish as listed below, C – Chrome, V - stainless steel effect, F - brushed brass, M - matt black, A – anthracite, W – white, B - brushed black chrome, N - polished nickel, L - brushed nickel, Q - unlacquered brass, RG - rose gold, BGR - brushed rose gold, P – copper, BP – Brushed Copper, AP – Antique Copper, S – stainless Steel, SF – Stainless Steel Brass Effect, SM – Black Stainless Steel, G – gunmetal, UB – unlacquered brushed brass, Z – Bronze, AZ – Antique Bronze, BZ - Brushed Bronze, GR – Graphite, G- Gold & T- Slate.

Approval Holder:

Crosswater Limited

Company Name

Crosswater Limited

Address

Lake View House, Rennie Drive, Dartford, DA1 5FU.

Country

United Kingdom

Phone

01322 475 739

General Email

David.Cheshire@bathroombrands.com

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Some products are supplied with a lever type or click-type pop up waste. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2312017

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” BSP (F) captive nut end connections.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/12/2028

Model:

31 513 xxx (without waste) 31 517 xxx (without waste) 31 915 xxx (without waste) 31 917 xxx (without waste) 31 574 xxx (click type waste) 31 518 xxx (without waste) 31 603 xxx (lever type waste) 31 607 xxx (lever type waste) 31 608 xxx (lever type waste) 31 621 xxx (lever type waste) 31 911 xxx (lever type waste) 31 578 xxx (click type waste) Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as example: 000 = chrome optic finish, PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Single hole, single outlet (with additional outlets for filtered cold water), fixed, combination tap assembly (various plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The tap body incorporates an additional push type headwork that controls the flow to a second outlet. Both outlets incorporate plastic aerators. The product is supplied with a filter assembly supplied via a brass connecting tee. Models incorporate approved single check valve cartridges; however, the complete assembly has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2312025

Size:

Stainless steel braided PEX lined hose with 3/8" BSP captive nut (tap connection) and Stainless steel braided TPSiV lined hose with 3/8" BSP captive nut (filter connection).

Marking:

Hansgrohe on tap body.

Installation Requirements:

R001 R006 R009 R150 R170

Expiry date:

31/12/2028

Model:

Aqittura M91 - 76 802 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Range of single-hole, single outlet, fixed, combination tap assemblies (brass bodies – various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. The products are supplied with click-type pop up wastes. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2312911

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 15mm compression end connections.

Marking:

BRISTAN on the body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/12/2028

Model:

HOU ES BAS C HOU ES BAS BB HOU ES BAS BLK

Approval Holder:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (brass bodies – various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a lever operated pop up waste. Maximum working pressure 5 bar. Maximum operating temperature 70 °C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2312353

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

St James, H & C printed on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/12/2028

Model:

SJ415XXYY and YYYY - MONOBLOC BASIN MIXER. xx denotes the finish option – CP = Chrome, NI = Bright Nickel, BN = Brushed NickeL, AG – Antique Gold, PB – Polished Brass – UC – Unlacquered Copper, UV – Unclacquered brass yy and yyyy denotes the Handle Options –LM = London Handle Metal Indice, LL = London Lever, LLBK = London Lever Black , CL – Crystal Lever, CLBK – Crystal Lever Black.

Approval Holder:

Marflow Engineering Ltd

Company Name

Marflow Engineering Ltd

Address

Britannia House Austin Way Hamstead Industrial Estate

Postcode

B42 1DU

Country

Birmingham

View All Listings by this Company

Range of pillar taps, (chrome plated, brass bodies), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate plastic flow straighteners. The products are supplied with metal back nuts. Maximum operating pressure 6 bar. Maximum operating temperature 85°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2309375

Size:

½” BSP

Marking:

Instinct (Brand of PHG) on operating member.

Installation Requirements:

R001 R005

Expiry date:

30/09/2028

Model:

4E1003 - DELLA BASIN TAP PAIR 4E1004 - DELLA BATH TAP PAIR

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

Range of single hole, single outlet, fixed combination tap assembly, (chrome plated brass bodies) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate aerators and plastic flow straighteners. The products are supplied with a click type pop-up waste. Maximum working pressure 16 bar. Maximum operating temperature 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2310391

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

Instinct (Brand of PHG) on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2028

Model:

4E1001 - DELLA MINI MONO BASIN 4E1002 - DELLA MONO BASIN

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

Range of single hole, single outlet fixed combination tap assemblies (brass bodies, various finishes – see models) quarter turn ceramic disc headworks with cross-top operating members. The spout outlets incorporate plastic aerators. Maximum operating pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2301913

Size:

Stainless-steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.

Marking:

Bristan on body.

Installation Requirements:

R001 R006 R010

Expiry date:

31/01/2028

Model:

CRU BAS C CRU BAS BLK CRU BAS BB

Approval Holder:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with or without a pop-up waste (see model), Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2307043

Size:

71 443 xxx model: Stainless steel braided thermoplastic silicone rubber (TPSiV) lined flexible hose assemblies incorporating ⅜” captive nut end connections. All other models: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/07/2028

Model:

71 581 xxx Vernis Blend Single lever basin mixer 190 with metal pop-up waste set, 71 582 xxx Vernis Blend Single lever basin mixer 190 without waste set, 71 562 xxx Vernis Shape Single lever basin mixer 190 with pop-up waste set, 71 590 xxx Vernis Shape Single lever basin mixer 190 with metal pop-up waste set, 71 591 xxx Vernis Shape Single lever basin mixer 190 without waste set, 71 552 xxx Vernis Blend Single lever basin mixer 190 with pop-up waste set, 71 443 xxx Vernis Blend Single lever bath mixer Monotrou. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

Country

Germany

View All Listings by this Company

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Deck Mounted Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections. Supplied with click type waste, Not Tested Tap Gap AUK3 when installed in line with the IRN's

Basis of Compliance:

Tested to a standard assessed as an appropriate British Standard by WRAS

Installation Requirements:

R001 R005 R010

Expiry date:

31/01/2030

Product Images

Approval Holder:

WRAS

Company Name

WRAS

Address

General Email

jason.furnival@wras.co.uk

View All Listings by this Company

Manufacturer:

Genn Tapps Ltd.

Company Name

Genn Tapps Ltd.

Address

123 Mainn Road

Postcode

W22 4BB

Country

United Kingdom

General Email

j-doe@gtapp.com

View All Listings by this Company

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Deck Mounted Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections. Supplied with click type waste, Not Tested Tap Gap AUK3 when installed in line with the IRN's

Basis of Compliance:

Tested to a standard assessed as an appropriate British Standard by WRAS

Installation Requirements:

R001 R005 R010

Expiry date:

31/01/2030

Approval Holder:

Genn Tapps Ltd.

Company Name

Genn Tapps Ltd.

Address

123 Mainn Road

Postcode

W22 4BB

Country

United Kingdom

General Email

j-doe@gtapp.com

View All Listings by this Company

Manufacturer:

Genn Tapps Ltd.

Company Name

Genn Tapps Ltd.

Address

123 Mainn Road

Postcode

W22 4BB

Country

United Kingdom

General Email

j-doe@gtapp.com

View All Listings by this Company