Combination Tap Assemblies
Section Code 0470 : Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:-
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
Back To Directory Sections
WRAS Approval Number: #2007388
Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members.
The spout outlet incorporates a plastic aerator. Inlets to the flexible inlet hoses incorporate single check valves (however the complete assembly has not been tested to demonstrate it provides adequate backflow protection).
Maximum working pressure 5.5 bar. Maximum operating temperature 60°C.
- Section:
- 0470 Combination Tap Assemblies
- Section Subtitle:
- Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:-
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2007388
- Size:
- Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
- Marking:
- Abode on operating member & tap front
- Installation Requirements:
- R001 R006 R010
- Expiry date:
- 31/07/2025
- Model:
-
GLOBE
- Approval Holder:
- Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L
Zenith Park
Whailey Road
Postcode
S75 1HT
Country
Barnsley
Phone
01226 283434
General Email
pillingworth@abodedesigns.co.uk
View All Listings by this Company
WRAS Approval Number: #2012357
Range of single hole, single outlet (swivel) combination tap assemblies (stainless steel bodies).
The flow of hot and cold water is controlled by a ceramic cartridge headwork with single lever operating member.
The flow of filtered water (filter not supplied) is controlled by a quarter turn ceramic disc headwork with a single lever operating member
The spout outlets incorporate a plastic aerator.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
- Section:
- 0470 Combination Tap Assemblies
- Section Subtitle:
- Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:-
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2012357
- Size:
- Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
- Marking:
- Brita logo on operating member.
Production code (MM/YYYY) on label on cold water hose.
- Installation Requirements:
- R001 R006 R009 R010 R120 R150 R170
- Expiry date:
- 31/12/2025
- Model:
-
3-way tap rectangle: 1039050.
3-way tap round: 1039051.
Product Images
- Approval Holder:
- Brita GmbH
Company Name
Brita GmbH
Address
Heinrich Hertz Strasse 4
D-65232 Taunusstein
Country
Germany
Phone
+49 6128 746 0
General Email
info@brita.net
View All Listings by this Company
WRAS Approval Number: #2101309
Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
- Section:
- 0470 Combination Tap Assemblies
- Section Subtitle:
- Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:-
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2101309
- Size:
- Grey polymeric (PET) braided PE-X lined flexible hose assemblies with ½” captive nut end connections.
- Marking:
- Kohler on operating members
- Installation Requirements:
- R001 R006 R009 R010
- Expiry date:
- 31/01/2026
- Model:
-
37316W-4-CP
Product Images
- Approval Holder:
- Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road,
Cheltenham,
Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
+44 (0) 844 571 5000
View All Listings by this Company - Manufacturer:
- Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road,
Cheltenham,
Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
+44 (0) 844 571 5000
View All Listings by this Company
WRAS Approval Number: #2101319
Range of single hole, single outlet, (swivel) combination tap assemblies incorporating brass bodies (chromium plated) and quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator.
Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.
- Section:
- 0470 Combination Tap Assemblies
- Section Subtitle:
- Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:-
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2101319
- Size:
- Stainless steel braided PEX lined hoseassembly incorporating ½” captive nut end connections.
- Marking:
- Deva on body.
DTC53 (brand of Methven) on rear of the body.
- Installation Requirements:
- R001 R006 R009 R010
- Expiry date:
- 31/01/2026
- Model:
-
PTN104 & WTN104 Walton Mono Kitchen Sink Mixer.
Preston Mono Kitchen Sink Mixer.
Model added September 2023:
MAL104
Product Images
- Approval Holder:
- Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court,
Yew Tree Way,
Golborne,
Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
View All Listings by this Company
WRAS Approval Number: #2101321
Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating members. The spout outlet incorporates a plastic aerator.
Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
- Section:
- 0470 Combination Tap Assemblies
- Section Subtitle:
- Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap.
Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:-
• the tap being lowered in any way;
• adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink;
• or the operation of a pull out hose attachment;
alternative fluid category 5 backflow protection is required.
- WRAS Approval Number:
- 2101321
- Size:
- Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
- Marking:
- Vitra on operating member.
Date of manufacture (WW/YY) on rear of body.
- Installation Requirements:
- R001 R006 R009 R010
- Expiry date:
- 31/01/2026
- Model:
-
A42156VUK – Sento sink mixer
Product Images
- Approval Holder:
- Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4
11300
Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90
View All Listings by this Company - Manufacturer:
- Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4
11300
Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90
View All Listings by this Company
Page 18 of 70
