Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes). Models (F1021 & F7132B) incorporate quarter turn ceramic disc headworks with either single lever or cross-top type operating members. Models (F1025X, F1026 & F7149) incorporate ceramic cartridge headworks with single lever operating members. All spout outlets incorporate plastic aerators. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2311330

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 1/2” BSP captive nut end connections

Marking:

Lanbiao on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2028

Model:

F1021-** F7132B-** F1025X-** F1026-** F7149-** **Represents the following different surface treatments: 1. H-Black 2. N- Nickel Brushed 3. GJS- Zirconium gold brushed 4. G- Zirconium gold 5. QTSL- Brushed bronze bright 6. QTS-Brushed Bronze Matte 7. TJ- Titanium 8. TJLS- Titanium brushed 9. MGJ- Rose gold 10. MGJL- Rose gold brushed 11. HGT- Red bronze 12. HTL- Brushed brass 13. HTS- Brushed copper 14. PVDQH-Gun Ash 15. HQ-Gun Ash Brushed 16. Q-Bronze 17. DYB-Electrophoresis Matt White 18. STS-Acid copper brushed 19. BZ-Spray pearl white 20. B-Spray matt white

Approval Holder:

Taizhou Lanbiao Sanitary Ware Co., Ltd.

Company Name

Taizhou Lanbiao Sanitary Ware Co., Ltd.

Address

Xudou Village, Qinggang, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Model V7K33YY-XX incorporates an additional outlet for a side spray connection. Maximum working pressure 3.0 Bar Maximum operating temperature 70.0°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2311077

Size:

Stainless steel braided PEX lined flexible hose assemblies with 1/2" BSP captive nut end connections.

Marking:

Samuel Heath on body

Installation Requirements:

R001 R009 R090

Expiry date:

30/11/2028

Model:

V7K32YY-XX V7K33YY-XX Models: Landmark V7K32YY-XX, V7K33YY-XX Controllers V759-LF-XX, V759-LK-XX, V759-LL-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, URM = Urban Brass Matt Lacquered. Where the product code suffix ‘YY’ denotes the lever options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: LK = Industrial Lever, or LF = Pure Lever

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

info@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

Leopold Street Birmingham

Postcode

B12 0UJ

Phone

+44 (0) 1217 662 200

General Email

info@samuel-heath.com

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly, (chrome plated brass body), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2311082

Size:

Stainless steel braided, PEX lined flexible hose assemblies incorporating ⅜” BSP (F) captive nut end connections.

Marking:

AQG on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2028

Model:

05MEL500CR

Approval Holder:

Aquagrif S.L.

Company Name

Aquagrif S.L.

Address

Avinguda Mare de Deu de Montserrat 35, nave C1 08970 Sant Joan Despí, Barcelona

Country

Spain

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator or flow straightener. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2311917

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Model 263726 Iflo on tap body Model 352755 CPS on tap body

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2028

Model:

263726 IFLO Kisdon Monobloc Sink Mixer Chrome & 352755 Laval Monobloc Sink Mixer Chrome

Approval Holder:

CITY PLUMBING SUPPLIES HOLDINGS LTD

Company Name

CITY PLUMBING SUPPLIES HOLDINGS LTD

Address

HIGHBOURNE GROUP LTD HIGHBOURNE HOUSE ELDON WAY NORTHHAMPTONSHIRE

Postcode

NN6 7SL

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating ceramic cartridge. The inlets incorporate stainless steel strainers. The spout outlets incorporate a plastic aerator or a flow straightener. Maximum working pressure 10 Bar. Maximum operating temperature 65 °C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2310394

Size:

Stainless steel braided EPDM lined hose assembly incorporating ½” BSP captive nut end connections

Marking:

TP on body

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2028

Model:

Ceramic Cartridge 352807 Arras Mono Swan Neck Sink Mixer Chrome

Approval Holder:

Travis Perkins Plc

Company Name

Travis Perkins Plc

Address

Divisional Office Lakeside House Bedford

Postcode

NN4 7HD

Country

Northhampton

Phone

+44 (0) 1604 503457

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator or flow straightener. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2311918

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

T[P on body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2028

Model:

546822 Contemporary Monobloc Sink Mixer Chrome 546825 Contemporary Monobloc 854368 Chantilly Monoblock Sink Mixer Matt 854367 Chantilly Monoblock Sink Mixer Brushed Brass 934960 Traditional Monobloc Sink Mixer Chrome 740892 Traditional Monobloc Mixer Brushed 158715 Talence Monobloc Sink Mixer Chrome 740922 Talence Monobloc Sink Mixer Brushed

Approval Holder:

Travis Perkins Plc

Company Name

Travis Perkins Plc

Address

Divisional Office Lakeside House Bedford

Postcode

NN4 7HD

Country

Northhampton

Phone

+44 (0) 1604 503457

View All Listings by this Company

Single hole, single outlet, swivel combination tap assembly (chrome plated brass body), incorporating ceramic cartridge headworks with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2312064

Size:

Stainless steel braided EPDM lined flexible hose assemblies with 1/2" BSP captive nut end connections or 15mm copper tails.

Marking:

Fac logo on body

Installation Requirements:

R001 R006 R010

Expiry date:

31/12/2028

Model:

Locarno/Sandy

Approval Holder:

APC Distributor Ltd

Company Name

APC Distributor Ltd

Address

Italia Park Estate, Atlantic Street, Broadheath

Postcode

WA14 5EJ

Country

Cheshire

View All Listings by this Company

Range of two-hole, single outlet, fixed combination tap assemblies, (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members and a manual diverter to shower outlet. The spout outlet incorporates plastic flow straighteners. The products are supplied with a shower hose, handset and metal back nuts. Maximum working pressure 10 bar. Maximum operating temperature 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2312357

Size:

¾” BSP (M)

Marking:

Bristan on body

Installation Requirements:

R001 R006 R020

Expiry date:

31/12/2028

Model:

APL BSM C APL BSM BLK APL BSM BB APE BSM C APE BSM BLK APE BSM BB APE BSM GM 283644 283647

Approval Holder:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon Tamworth. Staffordshire

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Range of single hole, single outlet, (swivel) combination tap assembly (chrome plated brass bodies) incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2310396

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections

Marking:

Instinct on operating member.

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2028

Model:

4E7010 – Keal Kitchen Mixer Chrome 4E7009 – Cullin Kitchen Mixer Chrome 4E7004 – Kiso Kitchen Mixer Chrome

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass body), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporate a plastic flow straightener or plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65˚C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2402805

Size:

Stainless steel braided EPDM/PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

ebb & flo on Body.

Installation Requirements:

R001 R006 R010

Expiry date:

28/02/2029

Model:

38842 Ladram Mono Mixer Kitchen Tap

Approval Holder:

TOOLSTATION LTD

Company Name

TOOLSTATION LTD

Address

EXPRESS PARK BRISTOL ROAD BRIDGEWATER

Postcode

TA6 4RN

Country

SOMERSET

View All Listings by this Company